How can i cheq sms delevery report ?

This isn't a feature of iPhones. SOME carriers will provide this using special coding within the message:
http://www.iphonestalk.com/tip-how-to-get-sms-delivery-reports-on-an-iphone/

Similar Messages

How Can I send SMS to a Mobile Phone within Oracle

How Can I send SMS to a Mobile Phone within Oracle

It depends on how you are planning to use this feature.
You can set up a mobile using special software in order to interface to it programatically - you can then, via this software interface, use this mobile to send SMS's.
Some service providers support an e-mail interface. Where you send the SMS as a the e-mail content and the mobile number as the recipient's address, or as the subject of the e-mail. However, many service providers have long since stopped providing this type of mail interface due to abuse. Remember that service providers are there to make money - not offer one a service via bulk SMS's can be send.
Some service providers have dial-up servers that works like the old style bulletin board systems (BBS's) of the 90's. You use a telnet like interface, dial into this BBS, and is prompted for mobile number, message to deliver, and even delivery confirmation. You can expect the cost of this phone call to this system, to also cover the cost of sending the SMS.
Some companies provide a software server to interface with one or more service providers - this allows you to fairly easily use this server gateway to send SMS's for you. Such a gateway server will typically support a telnet interface - allowing you to send SMS's via it from inside PL/SQL.
I've used all these options, and I've found the best one to be the last option. It is the easiest to use from a programming perspective. It comes with various management and reporting tools. So you need to do the very minimal in managing this whole SMS interface.

How can I want run the reports on AD, if I have no access to AD server?

I am not an AD administrator and I do not have permissions to AD server. But I have admin permissions to a site in AD and using RSAT, can administer the site. How can I want run the reports listed below? AD is on Windows 2008R2 server.
All Administrator logons
Logon statistics
Logons during non-business hours
Multiple logon failures
Password resets (other than Security Administrator)
Successful logon after several failures
User behavior anomalies
Logons of already logged-on users
All Logons Over Weekend
Audit Policy Changed
Computer Accounts Changed

Hello,
Some of your reports can be done using RSAT with Active Directory Powershell module. Some of them including
Computer Accounts Changed needs auditing to be enabled for directory object changes. These are not predefined reports which you can simply run my friend. Can you please be more specific?
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

How can we pass the master report value in to detail report

Hi All,
My question is how can I pass the master report value in to detail (Child) report filter?
I mean I have one master report if I click on employee name then I have to pass the employee id in to details report filter. Then detail report will display data for that particular employee.
How can I achieve this one in OBIEE?
Please help me to resolve this issue. Thanks in advance for your time and support.

In that case, you should look at using Go Url. In your column formula for the employee name, create a hyperlink to the detail report and pass the employee id.
Take a look at this post: Re: Dyanmic display of the Image Link URL
Thanks!

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
<b>RCOPCA08 Profit Center: Plan Line Items</b>
VVR

How can I pass parameter from report to form?

Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.

One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters

What is the use of control breaks in reoprts?how can we use them in report?

hello all
what is the use of control breaks in reoprts? and how can we use them in reports?

hi,
check this sample program using control break statements.
*& Report Y777_CBSTABLE
REPORT Y777_CBSTABLE1.
TYPES:
BEGIN OF S_MARKS,
     ROLLNO    TYPE I,
     SCODE(3) TYPE C,
    ROLLNO    TYPE I,
     SNAME(10) TYPE C,
     MARKS     TYPE I,
END OF S_MARKS.
DATA : C TYPE I,
       D(3) TYPE C,
       TOT TYPE I,
       STU TYPE I,
       MARKS TYPE STANDARD TABLE OF S_MARKS,
       WA_MARKS TYPE S_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 65.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 85.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 90.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 55.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 75.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 80.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
RETRIVAL ************************************
SORT MARKS BY SCODE .
LOOP AT MARKS INTO WA_MARKS.
    AT FIRST .
       ULINE.
       FORMAT COLOR 6 ON.
       WRITE:/ 'SUBJECT CODE', 65 ' ' .
       FORMAT RESET.
       FORMAT COLOR 6 ON INTENSIFIED OFF.
       WRITE:/20 'ROLL NO',
              40 'SUBJECT NAME',
              55 'MARKS',
              65 ' '.
       FORMAT RESET.
       ULINE.
    ENDAT.
    ON CHANGE OF WA_MARKS-SCODE.
       IF SY-TABIX NE 1.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
       ENDIF.
      FORMAT COLOR 6 ON INTENSIFIED ON.
      WRITE:/ WA_MARKS-SCODE.
      FORMAT RESET.
    ENDON.
    FORMAT COLOR 6 ON INTENSIFIED OFF.
    WRITE:/20 WA_MARKS-ROLLNO,
           40 WA_MARKS-SNAME,
           55 WA_MARKS-MARKS,
           65 ' '.
    FORMAT RESET.
    STU = STU + 1.
    TOT = TOT + WA_MARKS-MARKS.
    C = STU.
    AT LAST.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
         ULINE.
         FORMAT COLOR 6 ON INVERSE ON INTENSIFIED ON.
         WRITE:/ ' TOTAL STUDENTS : ', C.
         FORMAT RESET.
    ENDAT.
ENDLOOP.
reward points if hlpful.

How can we generate result set report?

how can we generate result set report ?means the out put of one query be the input of another query?how it is?

Hi
You have to use APD ( analysis process designer) to use results of one query as the input for the other queries.
Check this link
http://help.sap.com/saphelp_nw70/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
Regards

How can I send SMS from Mobile To PC? Plz Help me...

I created one Midlet that has the user interface to get the details from the user.
I want to send those details to server as SMS.
What can I do with WMA.How can I send SMS from Mobile to PC.
Plz help me to send SMS from Mobile to PC.

Hi Senthilnathan,
I too try for the same, if anyone has the idea please reply
Regards
Karthi

How can I have sms message delivery for IPhone

How can I have sms message delivery for IPhone

Check to see if there is a 3rd party app that provides it. Also, check with your carrier. If you are in the US, this is not an important thing, and most of the carriers do not provide delivery for SMS. If your from outside the US, see if the carrier supports it and what needs to be done to get it.

How can I generate email from report 6i.

Dear Sir,
When I click on e-mail button on report 6i (Win2k User) Generate following error:-
Rep-4203 error occurred while a mail message.
Rep-4220 There is a problem with the email subsystem.
When I generate report from administrator then email generated no error occurred.
Please help me how can I generate email from report 6i without administrator rights.
Thanks and Regards
Brij

You can try this at form that calling your report;
add_parameter(p_id,'DESFORMAT','HTML');
hope this helps...
defne
ps: raporu cagiridigin form program units'ine, bu add_parameter'i eklersen, HTML olarak raporunu emailleyebilirsin...

HOW CAN I BLOCK SMS MESSAGES FROM AN SPECIFIC PHONE NUMBER ON MY IPHONE 5

HOW CAN I BLOCK SMS MESAGES FROM AN SPECIFIC PHONE NUMBER ON MY I PHONE5, THANKS

You can't. Contact your carrier and ask them if they provide such a service. Most carriers do not, unless the text messages are threatening or harassing, but you can ask.
Regards.
Message was edited by: varjak paw; fixed typo.

(How can a table changed in report runtime)Can Anybody Answer This

How can i changed table in report runtime..(not database)
means if i have report it is using two tables. and i want to change one of the table and other table would be same always
eg tables..
emp
attendance1
attendance2
attendance3
attendance4
if have create report using emp & attendance1 tables in my report at design time.
but at runtime i would like to see records attendance2 tables joined with emp table..
in C#. Net

Hi,
It seems that you are having issue with Crystal reports .Net SDK's.
Post your question in Crystal Reports .NET SDK forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all .NET SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Amit

How can I write a tree report?

How can I write a tree report? If you have any document/ link can you please send that.
Regards,
Subhasish

REPORT zdemo_alv_tree.
Demo program prepared for ****************
CLASS cl_gui_column_tree DEFINITION LOAD.
CLASS cl_gui_cfw DEFINITION LOAD.
DATA tree1 TYPE REF TO cl_gui_alv_tree_simple.
INCLUDE <icon>.
INCLUDE bcalv_simple_event_receiver.
DATA: gt_sflight      TYPE sflight OCCURS 0,   " Output-Table
      gt_fieldcatalog TYPE lvc_t_fcat,         " Field Catalog
      gt_sort         TYPE lvc_t_sort,         " Sorting Table
      ok_code         LIKE sy-ucomm.           " OK-Code
END-OF-SELECTION.
CALL SCREEN 100.
*&      Form BUILD_FIELDCATALOG
This subroutine is used to build the field catalog for the ALV list
FORM build_fieldcatalog.
get fieldcatalog
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'SFLIGHT'
    CHANGING
      ct_fieldcat      = gt_fieldcatalog.
change fieldcatalog
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
LOOP AT gt_fieldcatalog INTO ls_fieldcatalog.
    CASE ls_fieldcatalog-fieldname.
      WHEN 'CARRID' OR 'CONNID' OR 'FLDATE'.
        ls_fieldcatalog-no_out = 'X'.
        ls_fieldcatalog-key    = ''.
      WHEN 'PRICE' OR 'SEATSOCC' OR 'SEATSMAX' OR 'PAYMENTSUM'.
        ls_fieldcatalog-do_sum = 'X'.
    ENDCASE.
    MODIFY gt_fieldcatalog FROM ls_fieldcatalog.
ENDLOOP.
ENDFORM.                               " BUILD_FIELDCATALOG
*&      Form BUILD_OUTTAB
Retrieving the data from the table and filling it in the output table
of the ALV list
FORM build_outtab.
SELECT * FROM sflight INTO TABLE gt_sflight.
ENDFORM.                               " BUILD_OUTTAB
*&      Form BUILD_SORT_TABLE
This subroutine is used to build the sort table or the sort criteria
FORM build_sort_table.
DATA ls_sort_wa TYPE lvc_s_sort.
create sort-table
ls_sort_wa-spos = 1.
ls_sort_wa-fieldname = 'CARRID'.
ls_sort_wa-up = 'X'.
ls_sort_wa-subtot = 'X'.
APPEND ls_sort_wa TO gt_sort.
ls_sort_wa-spos = 2.
ls_sort_wa-fieldname = 'CONNID'.
ls_sort_wa-up = 'X'.
ls_sort_wa-subtot = 'X'.
APPEND ls_sort_wa TO gt_sort.
ls_sort_wa-spos = 3.
ls_sort_wa-fieldname = 'FLDATE'.
ls_sort_wa-up = 'X'.
APPEND ls_sort_wa TO gt_sort.
ENDFORM.                               " BUILD_SORT_TABLE
*&      Module PBO OUTPUT
This subroutine is used to build the ALV Tree
MODULE pbo OUTPUT.
IF tree1 IS INITIAL.
    PERFORM init_tree.
ENDIF.
SET PF-STATUS 'ZSTATUS'.
ENDMODULE.                             " PBO OUTPUT
*&      Module PAI INPUT
This subroutine is used to handle the navigation on the screen
MODULE pai INPUT.
CASE ok_code.
    WHEN 'EXIT' OR 'BACK' OR 'CANC'.
      PERFORM exit_program.
    WHEN OTHERS.
      CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
CLEAR ok_code.
ENDMODULE.                             " PAI INPUT
*&      Form exit_program
      free object and leave program
FORM exit_program.
CALL METHOD tree1->free.
LEAVE PROGRAM.
ENDFORM.                               " exit_program
*&      Form register_events
Handling the events in the ALV Tree control in backend
FORM register_events.
define the events which will be passed to the backend
DATA: lt_events TYPE cntl_simple_events,
        l_event TYPE cntl_simple_event.
define the events which will be passed to the backend
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
APPEND l_event TO lt_events.
CALL METHOD tree1->set_registered_events
    EXPORTING
      events                    = lt_events
    EXCEPTIONS
      cntl_error                = 1
      cntl_system_error         = 2
      illegal_event_combination = 3.
set Handler
DATA: l_event_receiver TYPE REF TO lcl_tree_event_receiver.
CREATE OBJECT l_event_receiver.
SET HANDLER l_event_receiver->on_add_hierarchy_node
                                                        FOR tree1.
ENDFORM.                               " register_events
*&      Form build_header
      build table for header
FORM build_comment USING
      pt_list_commentary TYPE slis_t_listheader
      p_logo             TYPE sdydo_value.
DATA: ls_line TYPE slis_listheader.
LIST HEADING LINE: TYPE H
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'ALV TREE DEMO for ****************'.
APPEND ls_line TO pt_list_commentary.
p_logo = 'ENJOYSAP_LOGO'.
ENDFORM.                    "build_comment
*&      Form init_tree
Building the ALV-Tree for the first time display
FORM init_tree.
PERFORM build_fieldcatalog.
PERFORM build_outtab.
PERFORM build_sort_table.
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c,
        l_custom_container TYPE REF TO cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
CREATE OBJECT l_custom_container
      EXPORTING
            container_name = l_tree_container_name
      EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5.
create tree control
CREATE OBJECT tree1
    EXPORTING
        i_parent              = l_custom_container
        i_node_selection_mode =
                              cl_gui_column_tree=>node_sel_mode_multiple
        i_item_selection      = 'X'
        i_no_html_header      = ''
        i_no_toolbar          = ''
    EXCEPTIONS
        cntl_error                   = 1
        cntl_system_error            = 2
        create_error                 = 3
        lifetime_error               = 4
        illegal_node_selection_mode = 5
        failed                       = 6
        illegal_column_name          = 7.
create info-table for html-header
DATA: lt_list_commentary TYPE slis_t_listheader,
        l_logo             TYPE sdydo_value.
PERFORM build_comment USING
                 lt_list_commentary
                 l_logo.
repid for saving variants
DATA: ls_variant TYPE disvariant.
ls_variant-report = sy-repid.
register events
PERFORM register_events.
create hierarchy
CALL METHOD tree1->set_table_for_first_display
    EXPORTING
      it_list_commentary = lt_list_commentary
      i_logo             = l_logo
      i_background_id    = 'ALV_BACKGROUND'
      i_save             = 'A'
      is_variant         = ls_variant
    CHANGING
      it_sort            = gt_sort
      it_outtab          = gt_sflight
      it_fieldcatalog    = gt_fieldcatalog.
expand first level
CALL METHOD tree1->expand_tree
    EXPORTING
      i_level = 1.
optimize column-width
CALL METHOD tree1->column_optimize
    EXPORTING
      i_start_column = tree1->c_hierarchy_column_name
      i_end_column   = tree1->c_hierarchy_column_name.
ENDFORM.                    " init_tree

How can I archive sms on my iPhone?

How can I archive SMS on my iPhone?

Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php

How can i cheq sms delevery report ?

Similar Messages

Maybe you are looking for