How can i choose a lower quality print density when printing from firefox on my Mac. I cant move the slider along the scale ( I can when printing from the computer).

I can't change the print density when printing from Firefox. It is set at standard and although there is a "slider button" to use for choosing less or more density, it can't be moved. I can tick "grayscale". I can choose the density when printing from the computer. I have a Mac

I also have this problem where I used to be able to shrink a 2 page doc to a single page. Since upgrade to FF4 it no longer works - but you can choose say 60% and it will work. All used to work fine in FF3

Similar Messages

Q. 2: Powerpoint for Mac 2011 Version 1 How do I get PRESENTER VIEW to work so I can see my notes and the audience only sees the slide show? Currently PRESENTER VIEW shows up on the flatscreen and my laptop shows only the slide show....?!

Q. 2: Powerpoint for Mac 2011 Version 1 How do I get PRESENTER VIEW to work so I can see my notes and the audience only sees the slide show? Currently PRESENTER VIEW shows up on the flatscreen and my laptop shows only the slide show....?!

As PowerPoint it a Microsoft product, you may find that you get better answers to your question on their PowerPoint forums.
Best of luck.

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe

I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.

The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

How can I replace one low quality source with another high quality one ?

Am I really this dumb or is it really this hard ?
I have one timeline / project / edit that essentially references one long source clip / event / file.
I have a newer higher quality transcoded version of the same source and want to replace the original lower quality version and end up with the same edited result just with better quality images !?
It's the same frame rate and image dimensions but "relink" tells me the new file is not "similar" enough and won't do it !
Why is this so hard ? Is there a way to export a good old fashioned edl and then just reconform using the new source ?
What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well ?
Please let me know the problem is between the chair and the keyboard - not between the hard disk and the power cord !

Guessing that when you created the higher quality media, it was done outside of FCP and probably changed some important metadata that the app is looking for. Or perhaps there is a difference between the original audio and the new audio.
Anyway, Luis' advice about the replace edit seems like the easiest solution.
a_mumford wrote:
What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well?
The usual way to do offline online is within FCP – creating the proxies and then using Preferences to switch back to and from.
If you sent it out for grading, the Relink should work fine. If you haven't seen this kb doc, it's worth reviewing.
Russ

How to republish stream with lower quality

Hey guys, I was wondering is there a way that I can receive stream on my broadcast server and then republish that stream with lower quality on the same broadcast server. I was reading server side API reference but I couldnt find anything like that.
Only thing I found is to use %i in FMLE Stream field and then broadcast same stream with different bitrates, but can I take live stream that is being broadcasted and republish it with lower quality/bitrate on the server side somehow?
Or there is another way to achieve this?
I am running FMS 4.5 and I am using FMLE to broadcast video to the server.
Thank you for your answers.

FMS can't transcode streams. What you could do is use FFMPEG to pull the stream from FMS and publish a transcoded stream back into FMS.
Alternately, you could use Wowza Media Server and their transcoder plugin (fairly easy), or Wowza and Xuggler (requires a fair amount of programming)

WhenI print from firefox on a Mac everything comes out 50% too light, if I save the image and print from the desktop it looks fine. No problem either printing from FF with Win7. How do I fix FF on the Mac?

My iMac runs bootcamp, so I have both OSX and win7 available. I run the latest Firefox on both as my primary browser. The printing looks like the ink is running low, but when the same image is printed from other desktop apps the printing looks fine.

Hi, Jordan -
Welcome to Apple's Discussions.
If the original drive in the newer Mac is a Western Digital, its jumpers may be set to Single, which WD drives often use when there is only one device on the bus. When a second drive is added, the jumpers on the original must be reset to Master.
OS 9's utility is named Drive Setup - you should find it in the Utilities folder on the hard drive. Run that. Select the added hard drive in the list, then select Mount Volume from the Functions menu.
You can also check with that utility to see if the OS believes the drive has been set to automount at boot. Again, select the drive in the list. Then select Volume Settings from the Functions menu - there's a checkbox in that screen to set automount (for freshly initialized drives, that's turned on by default).
Also, try running Disk First Aid (should also be in the Utilities folder). Let it have a look at the second drive, and repair anything it can.
Apple System Profiler should report the format of all drives it sees. Is the format of the drive from the old Mac stated as Mac OS Standard, or as Mac OS Extended?

How can I make my Apple TV more reliable? It takes a day to download a HD movie on a T1 to play later, but when I try to play the movies, Apple TV can't, and says try again later. Doesn't the day download time put the HD movie on the Apple TV device?

How can I make my Apple TV work? I downloaded two movies, to play later, on April 4, 2014. I tried to watch them this evening only to get a message they are not available and to try later. How long can it take Apple to download the movies? I encourage anyone thinking about buying an Apple TV to get a different media player that is reliable. Apple TV is not worth the money, nor the time it takes to download movies, nor the effort trying to get your money back when Apple TV fails,and it failsl oftern.. Apple never seems to have a problem charging for the movies, but it frequently has a provlem delivering what people pay for.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

When i start firefox, a seriously ogly theme is installed by it self. And i can't delete it permanent. What do i do?

When i start firefox a seriously ohly theme did install it self.
When i deactive it, and remove it. And then restart firefox, it have re-installed it's self again.
How the heck, do i remove it for ever? It's pissin' me off every time.
And I'm startin to think about finding some else than firefox, to go to the internet..

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How to play HD in low quality

Hello.
I have Sanyo’s latest Xacti gizmo VPC-FH1, which shoots “Full” HD at 1920x1080. The MP4 clips are obviously huge, at some 3MB per second. I can play the clips fairly well with QuickTime, but it’s a different story in Final Cut 6.
Whether in viewer or in canvass (with audio tracks deleted for good measure) it plays for two seconds and then freezes and just skips to a frame a few seconds ahead every few seconds. Downsizing even down to 12% makes no difference, and even if it did, it’d be way to small to be any good for editing.
I remember having similar issues with 1080p back with the HVX200, but I think I managed to downgrade the playback/render quality to a point where it played smoothly.
I’ve messed with different settings now, to no avail.
There’s user preferences, systems settings, timeline setting, RT, etc, etc...
What can I do for the clips to play smoothly?
I have a 2Ghz Core Duo 15” MBP with 2GB 667MHz DDR2 SDRAM.
For future reference, is there a MacBook that could play these clips smoothly without sacrificing quality?
Thank you much,
MaW

macalltheway wrote:
What a bummer.
Now I'm stuck with a just-about useless camera. I really need something as small as the FH1 (it's TINY).
Hard-drive camcorders record MPG2, which I assume makes them just as useless.
Is then MiniDV the only choice for a sub-$500 1080i/p camera that will allow me to edit footage without converting?
If so, any tips on the smallest one out there?
Google came up with Sony's DCR-PC55, but it's four years old and only does SD...
Do you want good OR do you want cheap? That is the decision you need to make. Also, tiny tends to be the opposite of good.
P.S. AIC converted it best; ProRes(Lo/HQ) left it pixelated for playback. But it takes about an hour a minute, and increases the file-size tenfold, so it's no good anyway.
Yes, your actual editable video file is going to be 10x bigger than a MPEG-4 file. That is what you want.
P.S. 2 "....FCP is converting your video behind the scenes which is causing all your problems."
If that's the case, then my oldish MacBook Pro (2GHz Duo, 2GB RAM) has enough juice to play the 640x480 MPG4 clips smoothly, but not the HD ones. Could the latest MacBook (2.5/6/8GHz, 8GB RAM) could play the 1080p30 clips smoothly?
No, you still have the same problem. MPEG-4 files are non-editable. You really need to convert to an editable format and then bring that into FCP. MPEG Streamclip is going to be your best choice.

Nothing happens when I attempt to print from Firefox. I have no such problems with IE or Chrome. Why can't I print?

Whenever I try to print from FF, nothing happens, no error messages and no printing. If I go to the same page using Chrome, I have no problems. Should I uninstall and reinstall FF? If so, how can I export my bookmarks? Whenever I attempt to backup or export my current bookmarks using the instructions in the help file, I am told I have no bookmarks to export. Not true!

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

When I open firefox I get my hotmail sign in page and no toolbar so I can't browse the net. How do I get the toolbar back?

Without the toolbar I can't access any settings. I've tried everything I can find in the control panel but no luck.
BT just sent me an updated wireless modem yesterday and I had a lot of trouble making it work. I can only think I deleted some stuff I shouldn't have when I was messing about with it. I can access the internet via Internet Explorer and my hotmail works on firefox but only my mail account.

Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
The F10 can also be used on most PC's to temporarily reveal the Menu bar.
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

A siren sound is constant when I open Firefox on a Mac, how can I get rid of it

When I log into Firefox a siren sound which runs continuously starts.
== This happened ==
Every time Firefox opened
== Today-May 20, 2010 ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

It's Pac-Man's 30th Birthday today, and Google's homepage is a playable Pac-Man game around the Google logo. My boyfriend had the same problem, then I went to Google and was like Hey, it's Pac-Man! And then the siren started. He plays fine on my laptop, but for some reason the music is stuck on his computer.
All you have to do is disable the "Cool Previews" add on for firefox. Go to the "Tools" link at the top of the browser, go down to "Add Ons", go to the "Cool Previews", click "Disable". Then restart firefox and it should be fine!

How can i choose a lower quality print density when printing from firefox on my Mac. I cant move the slider along the scale ( I can when printing from the computer).

Similar Messages

Maybe you are looking for