How Can I clear the hard drive and install Tiger?

I bought a used iBook. I do not have the original discs, but I do have Tiger on DVD. Is it possible to clear the hard drive completley and put on a fresh copy of Tiger? How can I do this?

Rolesh:
Formatting, Partitioning Erasing a Hard Disk Drive
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Open installer and begin installation process.
Installation Process
(If you are still booted from the install disk skip first three steps)
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Open Installer and begin installation.
• Select installation option
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger and later) BSD Subsystems (Panther & earlier).
• Proceed with installation.
• After installation computer will restart for setup.
• After setup, reboot computer.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
• Connect to Internet.
• Download and install Mac OS X 10.4.11 Combo update (PPC) (Tiger)
Computer will restart.
• Repair Disk Permissions as previously.
• Go to Apple Menu > Software Update.
• Install all updates.
Computer may restart after updates.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
Please post back with questions, comments or update.
Good luck.
cornelius

Similar Messages

With Lion, How Can I Erase the Hard Drive and Reinstall The System Software?

I plan on buying a used iMac with a Core 2 Duo so that I can run Lion. Since Lion can only be purchased at the Mac App store what if I needed to erase my hard drive and re-install the system software. How can I do this without a DVD with the OS on it like I have for Snow Leapard. I suppose that I could boot from my Snow Leapard DVD and do the erase. Then, I supposed I would be able to download Lion again from the Mac App Store without paying for it again. But, how would you erase a hard drive and reinstall the system software when purchasing a new Mac with Lion already installed and no DVD at all with the OS on it?
-- Kaydell

When someone purchases any Apple computer with a DVD Drive, they should have recieved two DVDs... One contains the Operating System (up to Snow Leopard, Lion no longer ships on DVD) and the other contains the SYSTEM SOFTWARE (i.e. iLife and iWork). To install the software, they just insert the DVD with the SYSTEM SOFTWARE into any compatible Mac and run the installer. There is no need to erase the hard drive to install SYSTEM SOFTWARE. Maybe a friend can let you borrow the SYSTEM SOFTWARE DVD. The other option is to purchase the software via the App Store.
FYI... App Store purchases are linked to the PURCHASER'S APPLE ID. So if you buy a used Mac from a friend and that Mac already has Lion installed on it,that Lion purchase is linked to YOUR FRIEND'S APPLE ID, not yours. So if you want to download Lion again, you will have to enter your FRIEND'S APPLE ID AND PASSWORD. You can always have your friend re-download Lion and make you a DVD copy.

How can I clear my hard drive, and still keep lion?

I really don't want to have to buy OS X Lion again, and I really need to erase my hard drive...is there a way that I can accomplish both? I cannot find the files to create a bootable hard drive or DVD, where are they supposed to be? Thanks

Zackh.Tucker wrote:
Is there a way to have lion, and sell the computer to someone so they dont have to buy it when they get it? I need to erase my harddrive, but I'd like the buyer to be running lion when they get it.
No that is a violation of the Lion License agreement. When you sell a Mac that has had Lion installed on it the new owner has to buy their own license of Lion. The reason being is the license of Lion you purchased is tied to YOUR AppleID!
If you have promised the buyer the machine would come with Lion then you will need to refund them $29.99 which is the cost of Lion. In addition if you sell the machine with any application software you must surrender the original DVD's and/or license keys for that software so the new owner isn't stealing the software.
You will probably benefit by reading:
Prepare a Mac For Sale
Preparing your Mac for sale

How can I add the hard drive icon to the menu bar on a MBPr

How can I add the hard drive icon to the menu bar on a MBPr? I have downloaded Google Earth and it wants me to drag it to the hard drive for install. I was able to display the icon but now I would like to put it on the menu bar. Is this possible? Or can I add it to the hardware section under system preferences?
I'm a new Apple user, coming out of the dark ages of a lifetime in the PC Windows world.
Thanks

It's on your Desktop, is it not? You cannot put it on the menubar through OS X although you may find third-party utilities that will. If you want it on the Desktop:
Select Preferences from the Finder's Finder menu and check the desired boxes:
Click on the Sidebar icon in the toolbar to set what you want displayed in the Sidebar.

Selling my power mac G5, how do i clear the hard drive?

hello!
i am going to be selling my power mac G5. how do i clear the hard drive of all of my stuff, so the new owner has a fresh "new" mac?

Click here, and then follow the instructions in the article which relates to your situation.
(25054)

How can i add the hard drive to my desktop

how can i add the hard drive to my desktop

bobbyruff,
open the Preferences in Finder and click on the General tab. Look for a checkbox entitled “Show these items on the desktop: Hard disks”. Check it and close Preferences.

How do i erase the hard drive and reinstall?

How do i erase the hard drive and reinstall everything? My computer is running slow and i thought with having a 2.4ghz processor and 4gb of ram would make speed not a factor but obviously i was wrong in that my comp is running slow. Not as slow as my pentium processor desktop but its too slow for my tastes. Im waiting to get an external hd so i can save my songs and pictures to before i do erase everything.

Go to finder and in Spotlight, type in erase and install. The second choice is "Reinstall OS X. Print that out and follow the directions.
Good Luck.
Adam

How can I remove the hard drive from an iMac g4 before recycling it?

How can I remove the hard drive from an iMac g4 before recycling it?

There are take-apart guides online. For example
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
However, you can also consider securely erasing the hard drive instead. You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive. If this is a viable option, please post back (include Mac OS X version on installation disc).

I just bought a iMac G5 iSight from my school, how do I clean the hard drive and set it up as a new iMac, I just bought a iMac G5 iSight from my school, how do I clean the hard drive and set it up as a new iMac

I just bought an iMac G5 with iSight. How do I wipe the hard drive and set it up as a new iMac

Boot from your Mac OS X installer DVD. After selecting a language, choose "Disk Utility" from the menu bar.
When Disk Utility launches, use the "Zero Out Data" option under the Erase tab. Erase the entire disk, not only the free space.
One pass of zeros is secure enough for normal use. One pass will take a couple of hours, so plan some time.
Message was edited by: EZ Jim

Hello, My computer crashed, I removed the hard drive and installed it into a hard drive enclosure and now I am trying to get my Thunderbird data off of it

Hello,
Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my new computer and read the different tutorials on this website for extracting data from the external hard drive and installing it on my new computer however I cannot seem to be able to find the files that I need and quite frankly I do not know how to move them once I do find them. I even tried MozBackup but it could not find the files either. I searched for profiles.ini in the hard drive and the only hit I got was a profiles.ini file that was 111 bytes in size. I assumed that this was not what I was looking for but I did save a copy on my desktop. If someone has experience with moving files from a hard drive to a new computer I would be grateful for the help.
Thanks,
AN

lets get with the program. Mozbackup is useless in this situation because it looks for your profile in the location Thunderbird says it is.
You biggest hurdle is probably setting windows to show system and hidden files. The %appdata% folders are hidden by windows.

How can i change the full download and install path because my C: ist full and it automaticly downloads it on C: i allready changed in on adobe creative cloud but it dont work

How can i change the full download and install path because my C: ist full and it automaticly downloads it on C: i allready changed in on adobe creative cloud but it dont work

Read the part about SSDs. Otehrwise there is nothing you can do. Certain components wil lalways install on your system root drive.
Mylenium

How can I wipe my hard drive and restore to factory settings without the use of the original OS CD?

I have a 2010 MacBook and I need to wipe the hard drive and restore to factory settings.
The problem is that even though I have the original disc, the CD drive has stopped functioning and will reject any disc put into it.
Therefore, is there another method to do this without the CD?

Not very easily. To restore to factory software you need the original installation DVD (CDs).
If you have another Mac which is the same make and model so that those installation DVD (CDs) would work, you can use a Firewire cable between the 2 Macs and then put your Mac to be reset into Target mode and use the other Mac to install the software. However I suspect that is unlikely.

I have a late 2008 Macbook Pro last updated to Mavericks OS. The screen died and it's not worth replacing. How do I remove the hard drive and use a drive sled to access info I need?

I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.

the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

How do i wipe my hard drive and install Mountain lion

OK i wanted to install mavrick but i got my macbook pro in june of 2007 so it's to old. The command R does nothing when i reboot, and everything i find online about clearing my hard drive and getting ready to install mountain lion has that step in it. So how do i clear my hard drive so my computer is brand new like the day i bought it and also update my OS from snow leapard. Do i need to buy the disk for mountain lion or can i just download it? if someone has a link to something helpful i would love to have it.. Thanks

If you can't run Mavericks, you can't run Mountain Lion because they have the same hardware requirements.
Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion                       Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)

HT1820 how do you restore the hard drive with install cd after zeroing out all files? when i try to boot install disk or from usb a kernel panic screen appears telling me to restart my computer.

everytime i try to boot installation a message appears saying 'you need to restart your computer. holddown the power button until power is off then press down power button again'. i read that it was a kernel panic. cant boot into any modes but recovery mode with disk utilities but my wireless internet says no wifi hardware installed and sometimes startup manager. this just started after i erased the hard drive and had it overwritten with zeros. its a macbook pro 7,1. bought it in 2011, i think it was made in 2009. it has 320 gb of empty space right now and nothing ive tried seems to work. please help!!!! there is also no os x installed right now due to me zeroing out the hard drive how do i repair it so it will boot to installation?? i can also enter single user mode but do not have root access?

You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

How Can I clear the hard drive and install Tiger?

Similar Messages

Maybe you are looking for