How can I [cmd]+A including text boxes? Or how to import one Pages document into another Pages document?

Hi there,
I am working on my thesis with several Pages documents (for the first time). And I really have searched all over the Internet to find an answer to exactly my question but I cannot find it.
First my question was: How can I import one Pages document into another one? I found the answer on that (I think) and there is nothing else than just make a new section and copy/paste it in.
But then another issue pops up: I cannot [cmd]+A my whole document including the texboxes to paste it in the other Pages document. Then the document will be paste without the textboxes (and I have quite a lot of them in that document) and the text will not be at the right place.
So please explain to me: How I can combine two Pages documents and keep them exactly the way they are? Is that even possible?
I thank you so much in advance!

Hi Fruhulda,
I have already tried to mark the textboxes in line but that did not work, and besides then the text and the boxes won't be at the rigt places either. Thank you for your reply .

Similar Messages

How to import one project file into another project file

In previous versions I could take an 8 track project file and drag it into another project. This doesn't work in version 10. I am playing multi track stems for worship. I create each song as it's own file then drag them together to create a set. I don't mix down since I want to be able to add or subtract an instrument based on who may or may not be avaiable that day. Has this feature been taken out of Version 10? Can you do this in either Logic or Mainstage?
Thanks

<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml"/>
<xsl:template match="/">
<xsl:variable name="xml1" select="document('xml1.xml')"/>
<xsl:variable name="xml2" select="document('xml2.xml')"/>
<xsl:copy-of select="$xml1"/>
<xsl:copy-of select="$xml2"/>
</xsl:template>
</xsl:stylesheet>

How to retrive one table records into another table by multiple records

how to retrive table X records into another table Y by multiple records (means at once i want display 10 records) in form 6i .
when i am written cursor it is ftching only one record.But i want to display all records at once.
Declare
Cursor cur_name is
select PROTOCOL_NO,DOCNUM,SUBSETSN,REPEATSN,AESEQ,AETERM from coding_ae WHERE PROTOCOL_NO='KP229';
Begin
open cur_name;
loop
fetch cur_name into :PROTOCOL_NO,:DOCNUM,:SUBSETSN,:REPEATSN,:AESEQ,:AETERM;
exit when cur_name%notfound;
next_record;
end loop;
close cur_name;
End;

Hi,
Make sure the cursor is in the detailed block. For that use 8GO_BLOCK* built-in. So the code will be
Declare
Cursor cur_name is
select PROTOCOL_NO,DOCNUM,SUBSETSN,REPEATSN,AESEQ,AETERM from coding_ae;
Begin
GO_BLOCK('<detailed_block_name>');
open cur_name;
loop
fetch cur_name into :PROTOCOL_NO,:DOCNUM,:SUBSETSN,:REPEATSN,:AESEQ,:AETERM;
exit when cur_name%notfound;
next_record;
end loop;
close cur_name;
End;Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

How to copy one account preferences into another account on the same mac?

I would like to open a new account (on the same mac) but would like to copy some preferences including software from the existing account. How can I do that?
Thanks

To copy files from Account A to Account B:
1. Log in as A.
2. Find the files you wish to copy.
3. Move them to /Users/A/Public. Don't move your actual Documents, Pictures, Library etc folders. Just move their contents.
4. Log in as B.
5. Navigate with Finder to /Users/A/Public.
6. Drag the files to the desktop to make new copies of them.
7. Put the files away in the appropriate places in B's home folder.
8. Log back in as A and move the files in /Users/A/Public back to their original locations.

How to add one textbox value into another textbox value every month in a list of infopath 2013

InfoPath 2013.
I have created a list in which I placed 2 textboxes.
I have one textbox named Paid Amount:
Second textbox named Invoice Amount:
I want when I add any amount in Invoice Amount textbox in every month it Add into
Paid Amount textbox
How I can do this ?
for e.g:
Paid Amount : 2
Invoice Amount: 3
Paid Amount = 5
When enter next month 6 in Invoice Amount the
Paid Amount turn into 11.

You can apply formula using a rule by creating a hidden field and calculate the values. Refer to the following posts for more information
http://office.microsoft.com/en-in/infopath-help/add-subtract-multiply-and-divide-values-HP001096532.aspx
https://support.office.com/en-us/article/Add-rules-for-performing-other-actions-5322d726-b787-4e5f-8d37-ba6db68b451d?ui=en-US&rs=en-US&ad=US
and for complex calculations using code, refer to the following posts
http://www.infopathdev.com/forums/p/21500/74297.aspx
http://drekendrop.blogspot.in/2011/03/infopath-2010-get-and-set-value-of.html
Cheers,

How to import an existing project into another existing project?

RH10
I will need to bring in all the contents of a smaller WebHelp project into a larger WebHelp project.
I have found some discussion of merging, but I think this is a different matter (unless I am mistaken). I want to permanently incorporate the content of the smaller project into the larger project.
What is the best method for doing this please?
Mike

Hello again
Sure, you can import the topics as a "batch" by selecting many topics at once.
As for the links, I'm thinking that as long as you maintain the relative locations between the linked topics, that all should be fine.
What I mean by the relative locations is to say that if you have a folder structure in the source project, you will need to ensure you have the identical folder structure in the destination. Then ensure the topics are copied to the exact folders.
Cheers... Rick

How do I import one iPhoto library into another?

I have one iPhoto library on my iMac--family photos--and just imported another one from a Mac Mini, which I've called iPhoto (hiking), as it is photos of our hiking trip. I'd like to import everything from the latter into the former, then delete the latter. I tried just dragging the latter in, but instead of merging, it replaced the former. I've fixed that, thanks to Time Machine, but now need to merge my libraries. Any ideas?
Thanks

Well I'm not sure what you did but no one else has managed to ever import one Library to another without causing a mess as described above - in fact as you describe yourself:
It imported the photos and the thumbnails. All I had to do was delete any duplicates and orginize it.
You also lost any keywords, albums, Faces and Places along the wy. Merging two libraries will not import any thumbnails, there will be no duplicates and you'll have no organising to do.

How to get rid of the main text box in the back of the page AND move things

I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

Hi, Dylan. Welcome to Discussions.
If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
Also, you can create a text box the width of the page and then set it for 2 or more columns.
When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
Hope this helps to get you started.
Walt

Converting images that include text boxes and callouts in FM

Hello,
I'm on a new project (TCS 3.5, RH 9, FM 10) that requires me to include text boxes and lines (callouts) on top / in front of many of the images in FM. The reason they are not allowing me to add the text/callouts to the images themselves is because they want to keep the text boxes editable for translation.
The problem: After importing into RH, these images have white borders on all sides that they didn't have previously and I can't figure out what's causing it.
When I remove the text/callouts from over the images in question, then reimport, the problem resolves and the white borders disappear. When I view the original image files, there are no borders present. After I import, I view the image file in the RH folder and it does include the border. (So the border is on the image itself.)
Presently, the Object Properties for the images are as follows:
Offset From:
Top: 0.0"
Left: 0.0"
Border Width: 0.015 (which is lowest FM allows me to set... I get an error message when I try to enter 0.0)
Anchored Frame settings:
Anchoring Position: Below Current Line
Alignment: Left
Cropped/Floating: both unchecked
I've tried many different variations and tests; probably too many to list here. In short, the "border" appears when there is text/callouts on the image and it disappears when I delete the text/callouts. I was hoping that someone may have had a similar issue. Please let me know if you need more info to troubleshoot and thanks for reading.
Best,
Tom

I had the same problem with callouts, but my solution was to add them directly to the image, so that doesn't help you.
Another things you can try to is ensure that the edges of the image do not touch the edges of the anchored frame. Make sure there is a bit of white space. I don't know why, but when any of my images touch the anchored frame, the conversion looks awful.
Also, my images appeared best in Robohelp when I set the properties for the image in Robohelp as follows:
File > Project Settings
Import tab
Edit conversion settings for FrameMaker documents
On the left side, select Image
Set Width and Height to 0pt (this ensures that the image is not resized)

Why can't I create a document in my Facebook group on my iPad? It won't let me input any text into the text box field after I create a new document. Thanks.

Why can't I create a document in my Facebook group on my iPad. It won't let me input any text into the text box field after I create a new document. Thanks.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Somehow my MacBook (vintage) is now showing a black text box that continues to type and also speak what I am doing. There is also a blk border text box that follow me in the page itself. How do I get this turned off?

Somehow my MacBook (vintage) is now showing a black text box that continues to type and also speak what I am doing. There is also a blk border text box that follow me in the page itself. How do I get this turned off?

What version of Mac OS X? Do you have the original (or any) system disk?

How do I get the text to flow throughout more then one page.

Hello,
I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
I could always send the file to someone to see if they can figure it out.
Thank you,
Natalie

Thank you so much !
but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
Natalie
Date: Wed, 12 May 2010 07:53:12 -0600
From: [email protected]
To: [email protected]
Subject: How do I get the text to flow throughout more then one page.
Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
Thanks
Srini
>

How can i copy and referencing the value of a sub-total of a category into another cell?

How can i copy and referencing the value of a sub-total of a category into another cell?

Cells in Category rows 'exist' only when those categories are inserted using the Reorganize table. Those cells cannot be referenced from other cells.
If you want a category summed, you will need to do that in a cell that is still visible when the table is not sorted into categorie using the Reorganize pane. The function to use is SUMIF. You can find information regarding SUMIF (and SUMIFS) in the iWork Formulas and Functions User Gude. The guide may be downloaded using the link in the Help menu in Numbers '09.
Regards,
Barry

How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?

How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?

MyTienN wrote:
Someone had mentioned the possibility of saving each individual layer in Photoshop as a png file and importing into Indesign and adjusting it in there
What do you mean by "adjust"? Editing of Photoshop images should be done in Photoshop.
Sure, it's possible to save individual layers from an image in Photoshop as inidvidual files in a variety of formats, but what's the point? You could just as easily import the layered file, then copy/paste it into a new layer for each layer in the image and use layer visibility to control which ones show. I don't think that will do you a lot of good, though, if you use adjustment layers or opacity controls on the layer in Photoshop.

How to import the internal table into subroutine as parameter

how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine

Hi Yong,
try this:
parameters: p_tabnm like dd03l-tabname.
field-symbols: <fs_tabname> type standard table.
data: itab_ref type ref to data.
create data itab_ref type standard table of (p_tabnm)
                     with default key.
assign itab_ref->* to <fs_tabname>.
select * from (p_tabnm) into table <fs_tabname>.
perform subroutine tables <fs_tabname>
                   using p_tabnm.
*&      Form subroutine
      text
     -->P_<FS_TABNAME> text
     -->P_P_TABNM text
form subroutine tables   p_tabname type standard table
                 using    p_tabnm.
Here p_tabname already has the structure of the table you gave as input
parameter
endform.                    " subroutine

How can I [cmd]+A including text boxes? Or how to import one Pages document into another Pages document?

Similar Messages

Maybe you are looking for