How can i combine the JTabbedPane with JSplitPane?

there is an example in Notepad++,where when 2 or more tabs are open,we can right-click the tab and choose the "go to another view" command.it's so good that we can check 2 files in two views.
so i wanna know how to implement this function in java?and is there any example i can study?
Thanks a lot!

I just upgraded to version 8, hoping for a solution.
I know that I can write an Advanced Action for every slide like this:
It changes my variables and then advances to the right slide. But, I'll have 100+ slides when I'm done and I was hoping that could make this a little easier. AND, I can't track it on the branching view.
I was hoping that I could make this work:
I could use an Advanced Action to change my variables (I would only need a few) and then have it jump to a slide. This would show up in the Branching view. But, I can't get that work.
Are there any other options?

Similar Messages

I have three different ipods with music on them and have had to replace our computer as it was in a fire. How can we combine the ipods into one ipod.

We had to replace our computer due to a fire and lost many of the fiels which were on them. Many were music files for the ipods, we have thre. Also, do not have ID's and passwords to the iTunes store.
How can we combine the information so that they are all in each one or at least compbine everything into one ipod?

Just so you know the method suggested by Nelsonleee will cost your $29.95 USD, Yamipod is free.

How can I combine one font with many styles to show up as one font

How can I combine one font with many styles to show up as one font? I have quite a few fonts, that instead of showing up as a single font with different font styles (bold, bolditalic, semibold, light....) each style shows up in the fonts dropdown menu as a separate font. Any way I can fix this?
Another font question, is there any way to group my fonts in the dropdown menu according to different categories such as 'favorite san serif fonts', or 'script fonts'?

So your saying if it wasn't set up that way be the font creator there is nothing I can do. That's a shame.
Most of the fonts that do this were free fonts, such as Walkway.
But I do have some fonts (hebrew fonts) that I purchased that do the same thing.

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

How Can We Tune the Joins with "OR" Caluse ?

Hi
We've identified one Query in one of Our PL/SQL Stored Procedure which is taking huge time to fetch the records. I have simulated the problem as shown below. The problem Is, How can i tune the Jions with "OR" Clause. i have tried replacing them with Exists Caluse, But the Performance was not much was expected.
CREATE TABLE TEST
(ID NUMBER VDATE DATE );
BEGIN
FOR i IN 1 .. 100000 LOOP
    INSERT INTO TEST
    VALUES
      (i, TO_DATE(TRUNC(DBMS_RANDOM.VALUE(2452641, 2452641 + 364)), 'J'));
    IF MOD(i, 1000) = 0 THEN
      COMMIT;
    END IF;
END LOOP;
END;
CREATE TABLE RTEST1 ( ID NUMBER, VMONTH NUMBER );
INSERT INTO RTEST1
SELECT ID, TO_NUMBER(TO_CHAR(VDATE,'MM'))
FROM TEST ;
CREATE TABLE RTEST2 ( ID NUMBER, VMONTH NUMBER );
INSERT INTO RTEST2
SELECT ID, TO_NUMBER(TO_CHAR(VDATE,'MM'))
FROM TEST;
CREATE INDEX RTEST1_IDX2 ON RTEST1(VMONTH)
CREATE INDEX RTEST2_IDX1 ON RTEST2(VMONTH)
ALTER TABLE RTEST1 ADD CONSTRAINT RTEST1_PK PRIMARY KEY (ID)
ALTER TABLE RTEST2 ADD CONSTRAINT RTEST2_PK PRIMARY KEY (ID)
SELECT A.ID, B.VMONTH
FROM RTEST1 A , RTEST2 B
WHERE A.ID = B.ID
AND ( (A.ID = B.VMONTH) OR ( B.ID = A.VMONTH ) )
BEGIN
DBMS_STATS.gather_table_stats(ownname => 'PHASE30DEV',tabname => 'RTEST1');
DBMS_STATS.gather_table_stats(ownname => 'PHASE30DEV',tabname => 'RTEST2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST1_IDX1');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST2_IDX2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST1_IDX2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST2_IDX1');
END; Pls suggest !!!!!!! How can I tune the Joins with "OR" Clause.
Regards
RJ

I don't like it, but you could use a hint:
SQL>r
1 SELECT A.ID, B.VMONTH
2 FROM RTEST1 A , RTEST2 B
3 WHERE A.ID = B.ID
4* AND ( (A.ID = B.VMONTH) OR ( B.ID = A.VMONTH ) )
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=94 Card=2 Bytes=28)
   1    0   TABLE ACCESS (BY INDEX ROWID) OF 'RTEST2' (Cost=94 Card=1 Bytes=7)
   2    1     NESTED LOOPS (Cost=94 Card=2 Bytes=28)
   3    2       TABLE ACCESS (FULL) OF 'RTEST1' (Cost=20 Card=100000 Bytes=700000)
   4    2       BITMAP CONVERSION (TO ROWIDS)
   5    4         BITMAP AND
   6    5           BITMAP CONVERSION (FROM ROWIDS)
   7    6             INDEX (RANGE SCAN) OF 'RTEST2_PK' (UNIQUE)
   8    5           BITMAP OR
   9    8             BITMAP CONVERSION (FROM ROWIDS)
10    9               INDEX (RANGE SCAN) OF 'RTEST2_IDX1' (NON-UNIQUE)
11    8             BITMAP CONVERSION (FROM ROWIDS)
12   11               INDEX (RANGE SCAN) OF 'RTEST2_PK' (UNIQUE)
Statistics
          0 recursive calls
          0 db block gets
     300332 consistent gets
          0 physical reads
          0 redo size
        252 bytes sent via SQL*Net to client
        235 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          2 rows processed
SQL>SELECT /*+ ordered use_hash(b) */ A.ID, B.VMONTH
2    FROM RTEST1 A, RTEST2 B
3   WHERE A.ID = B.ID AND(A.ID = B.VMONTH OR B.ID = A.VMONTH)
4 ;
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=175 Card=2 Bytes=28)
   1    0   HASH JOIN (Cost=175 Card=2 Bytes=28)
   2    1     TABLE ACCESS (FULL) OF 'RTEST1' (Cost=20 Card=100000 Bytes=700000)
   3    1     TABLE ACCESS (FULL) OF 'RTEST2' (Cost=20 Card=100000 Bytes=700000)
Statistics
          9 recursive calls
          0 db block gets
        256 consistent gets
        156 physical reads
          0 redo size
        252 bytes sent via SQL*Net to client
        235 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          2 rows processed

We have itunes music on a computer, an ipod nano, and a new ipod touch under two different accounts. How can we combine the music from both accounts to one device?

We have itunes music on a computer, an ipod nano, and a new ipod touch under two different accounts. How can we combine the music from both accounts to one device?

There is no "adding" a device. Simply plug the iDevice into the computer. iTunes should automatically detect the device when it is connected.
iTunes can sync/manage as many iDevices as you want... there is no 1 device limit.

HT1386 The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

If the answer to the above question is "yes", FIRST, set up a backup of your new computer before you do anything else so the next time your computer breaks you will not be in the same situation. Backup solutions are numerous and inexpensive, and there is absolutely no excuse in the Third Millennium not to have one.
Then see this tip: https://discussions.apple.com/docs/DOC-3141

How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

Hi!
I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
Then I import it into OSB and make it work and the service works normally in the single node.
But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Thank you!

Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

How can I get the variable with the value from Thread Run method?

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
// I should get Inside the run method::: But I get only Inside
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

We want to access a variable from the run method of a
Thread externally in a class or in a method. I presume you mean a member variable of the thread class and not a local variable inside the run() method.
Even
though I make the variable as public /public static, I
could get the value till the end of the run method
only. After that scope of the variable gets lost
resulting to null value in the called method/class..
I find it easier to implement the Runnable interface rather than extending a thread. This allows your class to extend another class (ie if you extend thread you can't extend something else, but if you implement Runnable you have the ability to inherit from something). Here's how I would write it:
public class SampleSynchronisation
public static void main(String[] args)
    SampleSynchronisation app = new SampleSynchronisation();
public SampleSynchronisation()
    MyRunnable runner = new MyRunnable();
    new Thread(runner).start();
    // yield this thread so other thread gets a chance to start
    Thread.yield();
    System.out.println("runner's X = " + runner.getX());
class MyRunnable implements Runnable
    String X = null;
    // this method called from the controlling thread
    public synchronized String getX()
      return X;
    public void run()
      System.out.println("Inside MyRunnable");
      X = "MyRunnable's data";
} // end class MyRunnable
} // end class SampleSynchronisation>
public class SampleSynchronisation
public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run
method "+sathr.x);
// I should get Inside the run method::: But I get
only Inside
class sampleThread extends Thread
public String x="Inside";
public void run()
x+="the run method";
NB: if i write the variable in to a file I am able to
read it from external method. This I dont want to do

How can I get the variable with the value from Thread's run method

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
/* I should get:
Inside the run method
But I get only:
Inside*/
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

Your main thread continues to run after the sathr thread is completed, consequently the output is done before the sathr thread has modified the string. You need to make the main thread pause, this will allow sathr time to run to the point where it will modify the string and then you can print it out. Another way would be to lock the object using a synchronized block to stop the main thread accessing the string until the sathr has finished with it.

How can I disable the advancedAntiAliasing with fontswf in sdk

Hi,
in asc2.0 we need 'fontswf' script to embed fonts instead of use .as file directly.
but here is a problem
I cannt disable the advancedAntiAliasing with fontswf ?
because I have found an issue when I set advancedAntiAliasing is true, then the textfield (which font is embeded) antiAliasType doesn't work even type is advanced. I need set advancedAntiAliasing is false (in asc1.0 you can set it by .as file)
now i just set the sharpness and thickness to workaround in used asc2.0
but i think that is not great.
so how can I disable the advancedAntiAliasing with fontswf or any other solution?
thanks
hbb

Hello -
That setting is not fully supported. You can explicitly call it like this:
./compc -include-sources ../samples/test/Main.as -output ../samples/test/Main.swf -advanced-anti-aliasing=true/false
So, that is the compiler option that you want to use in order to disable it. The example I show you here uses the command line tool but it is a valid switch via Flash Builder as well

How can I search the tree with a given string?

How can I search the tree with a given string?
I don't find any function like "search(...)".
I want to find the tree nodes which include the given string.
Thanks.

Try it with .com instead of .ca - fixes it for me (corporate firewall blocks .ca here)
http://spendolini.blogspot.com/2013/09/working-with-apex-tree.html
Anyway - it links to an article of mine which describes interacting with the tree: Tom's Blog: Working with the tree in Apex. There is also a demo application on apex.oracle.com: http://apex.oracle.com/pls/apex/f?p=54687:38

How can I use the ScrollTablePane with kodo ?

How can I use the ScrollTablePane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.

Marco-
I am not familiar with any "TableScrollPane" classes. Can you clarify
whether this is some 3rd party custom component, or something you have
written?
Note that we do not provide any pre-build graphical data components with
Kodo, but we do intend to provide some examples in the future.
In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
>
How can I use the TableScrollPane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.--
Marc Prud'hommeaux
SolarMetric Inc.

How can I use the TableScrollPane with kodo

How can I use the TableScrollPane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.

Marco-
I am not familiar with any "TableScrollPane" classes. Can you clarify
whether this is some 3rd party custom component, or something you have
written?
Note that we do not provide any pre-build graphical data components with
Kodo, but we do intend to provide some examples in the future.
In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
>
How can I use the TableScrollPane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.--
Marc Prud'hommeaux
SolarMetric Inc.

HOW CAN I PUT THE AMOUNT WITH THE SIGN OF DOLLAR?

HI!
HOW CAN I PUT THE AMOUNT WITH THE SIGN OF DOLLAR?
BECAUSE WHEN I WRITE THE DATA THE AMOUNT OVERWRITE THE SIGN.
THANKS PEOPLE

THIS IS THE WRITE PART:
[code]
WRITE:
          /97 t_bsid-dmbtr,          "Invoice Amount
          104 '$',
          104 t_bsid-fecha,          "Payment Date
          114 t_bsid-pago,           "Payment Amount
          116 '$'.
[/code]

How can i combine the JTabbedPane with JSplitPane?

Similar Messages

Maybe you are looking for