How can i compare 2 internal table's data which have same structure ?

hi friends,
i want to know how to compare 2 internal table's data which have same structure

DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB LIKE TABLE OF LINE,
JTAB LIKE TABLE OF LINE.
DO 3 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
APPEND LINE TO ITAB.
ENDDO.
MOVE ITAB TO JTAB.
LINE-COL1 = 10. LINE-COL2 = 20.
APPEND LINE TO ITAB.
IF ITAB GT JTAB.
WRITE / 'ITAB GT JTAB'.
ENDIF.
APPEND LINE TO JTAB.
IF ITAB EQ JTAB.
WRITE / 'ITAB EQ JTAB'.
ENDIF.
LINE-COL1 = 30. LINE-COL2 = 80.
APPEND LINE TO ITAB.
IF JTAB LE ITAB.
WRITE / 'JTAB LE ITAB'.
ENDIF.
LINE-COL1 = 50. LINE-COL2 = 60.
APPEND LINE TO JTAB.
IF ITAB NE JTAB.
WRITE / 'ITAB NE JTAB'.
ENDIF.
IF ITAB LT JTAB.
WRITE / 'ITAB LT JTAB'.
ENDIF.
The output is:
ITAB GT JTAB
ITAB EQ JTAB
JTAB LE ITAB
ITAB NE JTAB
ITAB LT JTAB
This example creates two standard tables, ITAB and JTAB. ITAB is filled with 3 lines and copied to JTAB. Then, another line is appended to ITAB and the first logical expression tests whether ITAB is greater than JTAB. After appending the same line to JTAB, the second logical expression tests whether both tables are equal. Then, another line is appended to ITAB and the third logical expressions tests whether JTAB is less than or equal to ITAB. Next, another line is appended to JTAB. Its contents are unequal to the contents of the last line of ITAB. The next logical expressions test whether ITAB is not equal to JTAB. The first table field whose contents are different in ITAB and JTAB is COL1 in the last line of the table: 30 in ITAB and 50 in JTAB. Therefore, in the last logical expression, ITAB is less than JTAB.
regards,
srinivas
<b>*reward for useful answers*</b>

Similar Messages

How can I compare more than two VIs at a same time in labview 2009

How can I compare more than two VIs at the same time. I am an Lab Engineer I have to check assignments submitted by students and I want to know how many of them are copied from each other. Labview compare VI can only compare two VI at a time while I want to check about 30 VIs at same time.
Regards,

I'm not aware of a tool to compare multiple VIs. If you don't find anything, consider posting this to the LabVIEW Idea Exchange to expose this idea directly to NI R&D.
Thanks!
- Greg J

How can I filter a table from Data Control without enter query

I have a table from a web service data control based on WSDL.
I want to filter the table without input query at filter text box. Without filter text box, each would filter the table with a hardcoded query internally.
For example, when user click A menu button then it filters the table where type = '1' and B menu button filters the table by type='2' and C menu button filters the table by type=' ' .
How can I filter the table without enter query?
Could anyone point me to a solution please.
Thanks.
jdev 11.1.5
Edited by: 893364 on Oct 26, 2011 12:15 PM
Edited by: 893364 on Oct 26, 2011 12:21 PM

Hi,
when you created the table, did you try selecting the "filter" option. Select the table and go to the Property Inspctor. In the tool bar of the Property Inspector there is an icon to change the configuration. Its adding filter filter fields for the user to search in.
Option 2: The data of the Web Service actually is held in the iterators. If you wanted to filter the WebService query, I would not use the WS DC but a JAX-WS proxy in a POJO to fetch the WS Data. Then have the Data Control created from the POJO. You could have a method exposed on the POJO that allows you to filter the internally held data
Frank

How can I Export dynamic table to bapi, which is imported from BAPI.

At first time execution of BAPI , I am getting Items(Table formate) . Again I have export these Items to BAPI. As a Input Table. How can transfer data export table to import table.
And also I need delete some items, which are come form bapi. Then I need to export .
Any body can help me to achieve this issue.
<b>EX.   At first execution of BAPI, I am getting items in one out structure. After that I need to execute same BAPI using these items.</b>

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

How can I keep all the previous datas in the same array?

I have a problem with keeping the previous datas in my array. The problem is when the iteration loop is executed, I have one or two value(s) stored in the array. The second iteration I have either one or two values (depending on the condition) coming out, but it overwrites my previous value. I want to keep all my data in the same array as the loop is executed.PS. I have attached a simple vi along this message. If anyone can help me out with this, I really appreciate for the help.
Regards,
Sonny

If you iterate several times (N > 100) then I would suggest using the Initialize Array outside of the For Loop and then use the Replace Array Subset inside the Loop to populate the array. The reason for this is because the Build Array utility has to locate a new space in memory for the newly concatenated array -- the Replace Array Element utility uses the same memory space.
If you iterate just a few times with a small array then using the Build Array should be okay.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

How can i display blank table if data not present

hi all,
i have problem here.
i need to display one blank table if there is no data. in default, it just show column name box.
now i need to add blank box under column name.
please if you have any advice, let me know.
regards,
dityo

hi,
the solution that i get is create two similar table with if condition.
if condition for table A : <?if:count(G_PARTS) > 0?> . G_PARTS is name of group. table A will showed if data present.
if condition for table B (blank table) : <?if:count(G_PARTS) = 0?>. this blank table will showed if no data.
if
table A
end if
if
table B
enf if
hope this help.
rgrds,
tyo

How can I save images and text data to the same file?

I have been looking at ways to do this for a while. My main VI saves the raw data to a text file which the users then import to Excel and plot. I am trying to simplify this process and have been looking at ways to accomplish this task. I want to be able to save the raw data to a file and then save the Labview graph as well. This will eliminate the tedious task of importing the raw data into Excel and plotting it. I can save the raw data to its own file and I can use the Get Image method for the graph and save it to its own file. I am currently using the .png format. Is there a way of saving both to the same file ie, importing the image into Excel or Word etc. Before I go off doing a science project I wanted to see if anyone else had experience completing this task and had any recommendations. Thanks in advance for any help.

well ther are a couple of ways. You could use the standard report generation VI's and make a complete report with the image of the graph embedded into the report with the raw data or you could use activeX and control excel thru LV and put the raw data into excel directly and have excel graph the data without any user interaction. I have posted a slew of VI's on the excel board if you do not have the report generation toolkit. If you could tell me which way you want to go I could possibly send you an example.
For more information and some sample VI's and tool kits, you can go to the excel board
Joe.
"NOTHING IS EVER EASY"

Can we create global internal table in data dictionary

help me
i want to know whether we can create global internal tables in data dictionary

Hi Swathi,
The whole concept of internal table is to manipulate the data at runtime.
This replaces the concept of two dimentional array in other languages.
The power of internal tables is it gets lakhs of records at runtime. I mean it can accomodate lots of records at runtime.
So you can create a table type in DDIC and use it to declare your internal table.
Yes, You can create global internal tables for function modules.
By declaring the internal table in top include you can use this internal table all the function modules of that function group. So if one function module is filling the data another can use it as it is stored globally.
Hope this answers your curiosity.
Award points if useful else getback.
Aleem.

How to Pass the internal table data?

DearAll,
How to pass the Data of one internal table on a 1.html page to another html page for output, in BSP Application.
regards.

Hi ,
In the onInputProcessing event of the first page , write the following code...
call method NAVIGATION->SET_PARAMETER exporting
    name = 'it_filt_cur'
    value = it_filt_cur.
Here it_filt_cur is internal table.
          NAVIGATION->GOTO_PAGE('next.htm').
In the next page , you can make the internal table as auto in the attributes.
Since you have made the itab as auto transfer , you can directly access the itab in the initialization event of the next page if it is stateless.
Regards,
Laxman Nayak.
Message was edited by: Laxman Nayak

Can we create internal table dynamically ? how?

hi to all experts,
can we create internal table dynamically ? how?plz explain me with an example.Anybody with good example will be rewarded.it was asked in an interview what the answer for it

HI
Yes you can create
see this
/people/rich.heilman2/blog/2005/07/27/dynamic-internal-tables-and-structures--abap
JUST USE THIS CODE AND DO THE ESSENTIAL CHANGES ACCORDING TO YOU
STEP: 1 - get backend field catalog (currently displayed alv)
CLEAR: tl_fieldcatalog. REFRESH: tl_fieldcatalog.
CALL METHOD w_grid->get_backend_fieldcatalog
IMPORTING
et_fieldcatalog = tl_fieldcatalog.
STEP: 2 - create a new fieldcatalog for dynamic internal table
CLEAR: sl_fieldcatalog.
CLEAR: t_outtab_fieldname. REFRESH: t_outtab_fieldname.
CLEAR: tl_fieldcatalog_new. REFRESH: tl_fieldcatalog_new.
CLEAR: t_download_fieldname. REFRESH: t_download_fieldname.
CLEAR: t_download_fieldheading. REFRESH: t_download_fieldheading.
LOOP AT tl_fieldcatalog INTO sl_fieldcatalog.
STEP: 2.1 - populate data in T_OUTTAB_FIELDNAME
APPEND sl_fieldcatalog-fieldname TO t_outtab_fieldname.
STEP: 2.2 - populate TL_FIELDCATALOG_NEW & T_DOWNLOAD_FIELDNAME
IF sl_fieldcatalog-no_out EQ ''.
IF sl_fieldcatalog-fieldname NE 'STATUS'
OR sl_fieldcatalog-fieldname NE 'MESG_STATUS'
OR sl_fieldcatalog-fieldname NE 'ZLOCK'
OR sl_fieldcatalog-fieldname NE 'T_PLANT'
OR sl_fieldcatalog-fieldname NE 'T_CSR'.
If field is COMM_PLANT, change its length
IF sl_fieldcatalog-fieldname EQ 'COMM_PLANT'.
sl_fieldcatalog-outputlen = 1800.
sl_fieldcatalog-intlen = 1800.
sl_fieldcatalog-dd_outlen = 1800.
ENDIF. "comm_plant
sl_fieldcatalog_new = sl_fieldcatalog.
APPEND sl_fieldcatalog_new TO tl_fieldcatalog_new.
APPEND sl_fieldcatalog-fieldname TO t_download_fieldname.
APPEND sl_fieldcatalog-scrtext_l TO t_download_fieldheading.
CLEAR: sl_fieldcatalog, sl_fieldcatalog_new.
ENDIF.
ENDIF.
ENDLOOP.
STEP: 3 - create dynamic internal table
FREE: ref_download.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
I_STYLE_TABLE =
it_fieldcatalog = tl_fieldcatalog_new
IMPORTING
ep_table = ref_download
E_STYLE_FNAME =
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ASSIGN ref_download->* TO <ft_download>.
CREATE DATA ref_wa LIKE LINE OF <ft_download>.
ASSIGN ref_wa->* TO <fs_download>.
STEP: 4 - populate data in dynamic internal table
LOOP AT t_outtab INTO wa_outtab.
LOOP AT t_download_fieldname.
ASSIGN COMPONENT t_download_fieldname OF STRUCTURE
<fs_download> TO <fs_download_field>.
IF t_download_fieldname-field EQ 'COMM_PLANT'.
STEP: 4.1 - get long text from database table
CLEAR: wal_table.
SELECT SINGLE * FROM zshaven_plnt_txt
INTO wal_table
WHERE vbeln = wa_outtab-vbeln
AND posnr = wa_outtab-posnr
AND del_no = wa_outtab-del_no
AND del_itm = wa_outtab-del_itm.
IF sy-subrc EQ 0.
STEP: 4.2 - break long-text into separate lines
CLEAR: tl_text. REFRESH: tl_text.
SPLIT wal_table-plant_comm
AT '~'
INTO TABLE tl_text.
STEP: 4.3 - Combine these separate lines with space in
between two lines
CLEAR: wal_text, final_text.
LOOP AT tl_text INTO wal_text.
IF final_text IS INITIAL.
final_text = wal_text.
ELSE.
CONCATENATE final_text '-' wal_text
INTO final_text.
REPLACE '-' WITH ' ' INTO final_text.
ENDIF.
ENDLOOP.
STEP: 4.4 - move long text to work-area
<fs_download_field> = final_text.
ENDIF. "subrc
ELSE. "t_download_fieldname
READ TABLE t_outtab_fieldname
WITH KEY field = t_download_fieldname-field.
ASSIGN COMPONENT t_outtab_fieldname-field OF STRUCTURE
wa_outtab TO <fs_outtab_field>.
<fs_download_field> = <fs_outtab_field>.
ENDIF.
ENDLOOP.
STEP: 4.5 - Move data from work-area to dynamic internal table
APPEND <fs_download> TO <ft_download>.
CLEAR: <fs_download>.
ENDLOOP.
STEP: 5 - download
CALL FUNCTION 'DOWNLOAD'
EXPORTING
filename = 'C:\zshaven.xls'
filetype = 'DAT'
filetype_no_show = 'X'
filetype_no_change = 'X'
TABLES
data_tab = <ft_download>
fieldnames = t_download_fieldheading
EXCEPTIONS
invalid_filesize = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
customer_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

How to pass internal table with data in ABAP OO

Hi experts ,
Here is the problem...
I create a screen 100 and use the internal table to get data from database, and then press the button on screen 100 , it will call screen 200.
I use ABAP OO code in screen 200, and i want to keep the internal table with data that i get from the sceen 100 parts, but it seems that it just supports to create a new internal table and get data from database in ABAP OO. That means i need to create a new table to save the data in internal table ? Or there is any other solution something like exporting or memory id ...
ps . the internal table in screen 100 is declared in global area, the beginning of the code.
Please give me some advice, thanks a lot!
Regards ,
Claire

I have already know how to do, here is my code:
METHODS fill_tree importing itab2 like itab1.
CALL METHOD: me->fill_tree exporting itab2 = itab1.
In METHOD fill_tree,
declare
data: itab3 TYPE STANDARD TABLE OF itab,
itab3[] = itab1[].
It is useful to me, thanks a lot.

How to pass the internal table data to smartforms

Hi Gurus,
I have a problem in passing the internal table data to the smartforms. In the print program
I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         = T_SSFCTRLOP
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
    OUTPUT_OPTIONS             = T_SSFCOMPOP
    USER_SETTINGS              = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    LT_PRDLBL                 = LT_PRDLBL1
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
In the print program I had defined the internal tables like
Data: lt_prdlbl type standard table of zprdlbl.
Data: Begin of lt_prdlbl1 occurs 0.
        include structure zprdlbl.
Data: End of lt_prdlbl1.
How do I define the internal table in the smartform to get the values printed in the smartform?.
<REMOVED BY MODERATOR>
Thanks,
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 1:01 PM

Nehal,
Thanks for quick response.
In the smartform under the Form Interface->Tables tab
I had defined
LT_PRDLBL LIKE ZPRDLBL. If I define TYPE instead of LIKE I get the error message saying "FLAT TYPES may only be referenced using LIKE for table parameters".
In the main window I have created LOOP, in which I have ticked the internal table and
LT_PRDLBL INTO LT_PRDLBL. In the text node I am passing the values of this internal table
&LT_PRDLBL-XXXX&.
I am able to get the print but the data is not printing.
Please help me with this.
Thanks,

How can i compare: java.util.Date oracle.jbo.domain.Date?

I have made a ViewObject wich contains a date column.
I want to check if this date is smaller/greater than sysdate:
i get following error:
Error(45,24): method <(java.util.Date, oracle.jbo.domain.Date) not found in class Class4
code:
SimpleTimeZone pdt = new SimpleTimeZone(-8 * 60 * 60 * 1000, ids[0]);
// set up rules for daylight savings time
pdt.setStartRule(Calendar.APRIL, 1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
// create a GregorianCalendar with the Pacific Daylight time zone
// and the current date and time
Calendar calendar = new GregorianCalendar(pdt);
Date trialTime = new Date();
calendar.setTime(trialTime);
(VO_ULNRow)singleRow = null;
while(vo.hasNext()){ // ViewObject vo;
singleRow = (VO_ULNRow)vo.next();
if(calendar.getTime() < singleRow.getEO_ULN_BORROWFROM()); //singleRow returns oracle.jbo.domain.Date
etcetera
how can i compare those 2?

Hi,
oracle.jbo.domain.Date has two methods which suit your needs
longValue() which returns a long (though I'm not sure if returns a long comparable to the long returned by java.util.Date)
and dateValue() which returns a java.util.Date
I hope it helps,
Giovanni

Java.util.Date oracle.jbo.domain.Date how can i compare?

I have made a ViewObject wich contains a date column.
I want to check if this date is smaller/greater than sysdate:
i get following error:
Error(45,24): method <(java.util.Date, oracle.jbo.domain.Date) not found in class Class4
code:
SimpleTimeZone pdt = new SimpleTimeZone(-8 * 60 * 60 * 1000, ids[0]);
// set up rules for daylight savings time
pdt.setStartRule(Calendar.APRIL, 1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
// create a GregorianCalendar with the Pacific Daylight time zone
// and the current date and time
Calendar calendar = new GregorianCalendar(pdt);
Date trialTime = new Date();
calendar.setTime(trialTime);
(VO_ULNRow)singleRow = null;
while(vo.hasNext()){ // ViewObject vo;
singleRow = (VO_ULNRow)vo.next();
if(calendar.getTime() < singleRow.getEO_ULN_BORROWFROM()); //singleRow returns oracle.jbo.domain.Date
etcetera
how can i compare those 2?

i get following error:
Error(45,24): method <(java.util.Date,
oracle.jbo.domain.Date) not found in class Class4
if(calendar.getTime() <
singleRow.getEO_ULN_BORROWFROM()); //singleRow returns
oracle.jbo.domain.Date
how can i compare those 2? You cannot compare these two values directly. You must convert the oracle.jbo.domain.Date object to a GregorianCalendar object. Something like:
oracle.jbo.domain.Date dt = singleRow.getEO_ULN_BORROWFROM();
GregorianCalendar gc = new GregorianCalendar(dt.getYear(), dt.getMonth(), dt.getDay());
if (calendar.getTime() < gc.getTime())
}

I am using pages '09. I have been trying to put together a report and I am using tables to help keep my data in line. My data is free text and would like to footnote certain data as to it origin, but footnoting is grey-out. How can I footnote on table mod

I am using pages '09. I have been trying to put together a report and I am using tables to help keep my data in line. My data is free text and would like to footnote certain data as to it origin, but footnoting is grey-out. How can I footnote in table mode inpages '09?

Footnotes can only be inserted in the main text area between the margins on a Word Processing document.
Peter

How can i compare 2 internal table's data which have same structure ?

Similar Messages

Maybe you are looking for