How can I completely disable Airport / BlueTooth?

Hello All,
I've asked this in another thread, but have just realized that there is a dedicated Airport discussion area. So, I figured I would refine my question using information gathered from my previous discussion, and see if you fine people here in this discussion group might be able to shed additional light on my question.
So, here we go:
For those that want the background on my question, the original thread is at:
http://discussions.info.apple.com/webx?128@@.68bc9dac
My desire is to completely disable the Airport and BlueTooth features that are now integrated into the new systems.
I am considering purchasing a new iMac G5 or Power Mac G5, and want to see if it is possible to disable these features before I spend my money.
While others are convinced that I am crazy, my personal desire is not to have this type of radio frequency / radiation emissions on my desk.
I know there are many who feel it is not an issue or problem, so rather than discuss whether it is a warranted concern, I would prefer to discuss the simple matter of whether it can be disabled.
(see my previous discussion for my feelings / research on the subject)
My previous discussion led me to understand that it is soldered into the main board on the 2 latest revisions of the iMac G5, and probably also on the Power Mac G5. Any confirmations / corrections there?
I was hoping that I could simply unplug them like I could on older systems to eliminate them completely.
If that is not possible at all on the iMac G5's or Power Mac G5's, then here are a couple of additional questions:
I have learned that there is a setting in OS X to "Turn Off" the Airport features.
Does this setting actually power down and completely deactivate the Airport circuitry so that it would be essentially the same as if it were removed? Or, does it simply ignore the Airport controller and leave it powered-up?
Any knowledge there?
Secondly, anyone know if there is a similar setting for Blue Tooth? If there is, same question. Does it completely shut-down / power-off the Blue Tooth circuitry? Or, does it simply ignore it and leave it electrically powered?
My end goal is to have absolutely no signal coming out of the computer's Airport and BlueTooth circuitry. I want it to be essentially the same as if they were not even present.
If you know where I might find technical documents supporting or explaining how this enable / disable feature works (in relation to the above question), I would greatly appreciate it.
Additionally, in the event that disabling the features in Software / OS X doesn't work, is it safe (or possible) to simply disconnect the antenna from the Airport / BlueTooth controller or circuitry. It would seem that this might be quite easy on the Power Mac G5. It might still be possible on the iMac G5's with built-in Airport and Blue Tooth.
Yes, I know that some will think this quite unusual. Some may think I'm weird or strange. But, if you read my other discussion, you might understand my personal perspective and concern.
Either way, I am hopeful that rather than discussing whether there is a valid concern, that we might be able to discuss options and ideas on how to disable these features.
Thank you in advance.

Your original thread on this topic has pretty well beaten the subject to death.
Yes, turning "Off" the Airport card from the MacOS Airport menu does indeed turn off its radio transmitter. That is the method recommended for people who, for example, want to take their Mac laptops on an aircraft where one is not allowed to have a radio transmitter on during the flight.
There is a similar setting in Bluetooth Preferences.

Similar Messages

How can I completely disable the sound on an iMac?

I work at a high school where I am in charge of all technology on campus, as well as the position of librarian (an effort to save money by the disctrict). In the library, I have about 14 iMacs (2008) that are available for students to do research and reports on, though the computers have basically been turned into really expensive Facebook and YouTube machines. Anyways, I'm looking for a way to completely disable the audio on these iMacs. Simply muting the volume and hiding the control on the toolbar doesn't help because there's volume control right there on the keyboard. Is there any way to just disable the sound all together? Such as disabling the sound card or possibly usuing a utility or script? An even better solution would be to disable the speakers, but leaving the headphone jack enabled so if need be, a student can plug in headphones and still get sound. But I'll settle for completely disabling the audio, if anyone can help with that. Thanks so much!

One thing you might try is going to System Preferences/Sound and changing the output from Internal Speakers to Line Out or Digital Out. Line Out would be for headphones. I assume it keeps this setting after a reboot but you should test it.
Disabling the sound will also disable all warning sounds. Those can be pretty useful.

How can I completely disable Genius from iTunes (version 11)?

Whenever I go into the "Playlists" tab in iTunes, after a couple of seconds it'll automatically jump to the "Genius" playlist and tries to get me to turn on Genius (which I have nooo interest in).
Its INSANELY annoying, right as I'm about to click on a song I want to play, it switches to the Genius page.
How can I stop this? Genius is NOT turned on, so I can't turn it off.

You can't permanently delete any items from your purchase history, all you can do is hide them so that they don't show in the Purchased links for redownloading.

How can I completely disable ssl3.0? about:config does not have security.enable_ssl3

Latest discovery by Google says even though I use TLS, I may be configured to be backward compatible to SSL3.0 and a "Poodle" attack by a predator website might induce me to use SSL3.0 and be vulnerable to attack. They say the cure is: "To prevent POODLE attacks on Firefox, open about.config, search for "security.enable," and set "security.enable_ssl3" to false."
First mistake is "about.config" should be "about:config". Second problem is there is no "security.enable_ssl3" line to be found. I don't know if I'm supposed to create the line, and if so, how do I do that?

A new extension has been released to "fix" Firefox 26 and later versions, until Firefox 34 is released on Nov 25th with the fix built-in.
https://addons.mozilla.org/en-US/firefox/addon/ssl-version-control/

How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs.

How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs. This is important as otherwise while I am in the app tab, i mistakenly start browsing from that tab and meaning of the app tab is completely lost...

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

How to I completely disable the voice activated dialing ...

How to I completely disable the voice activated dialing on my Blackberry?

One thing you might try is going to System Preferences/Sound and changing the output from Internal Speakers to Line Out or Digital Out. Line Out would be for headphones. I assume it keeps this setting after a reboot but you should test it.
Disabling the sound will also disable all warning sounds. Those can be pretty useful.

How can I completely get my iPhone and iPad disconnected from iTunes Match? I don't usually have Cloud access and find iTunes Match to be very annoying.

How can I completely get my iPhone and iPad disconnected from iTunes Match? I don't usually have Cloud access and find iTunes Match to be very annoying.

Csoud1 is correct. But if you still want to keep your iTunes Match subscribed and did not want to sync with your iOS devices, do the following:
On you iOS devices, just go to Setting > Music > disable iTunes Match

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
Arup

This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

HT1918 how can i completely remove a credit card from my account?

how can i completely remove a credit card from my apple id?

Hi Craig,
Thanks for visiting Apple Support Communities.
Using the steps from the article above (iTunes Store: Changing your payment information), you should be able to select "None" as your payment method. This will remove your credit card from your iTunes Store account (Apple ID).
Changing your payment information using an iOS device
Tap Settings on the Home screen.
Tap iTunes & App Stores.
Tap your Apple ID. (If you aren't signed in, enter your Apple ID and password and tap Sign In.)
Tap View Apple ID.
Enter your Apple ID password.
In the Edit section, tap Payment Information.
Update the information that you want to change.
Note: You can find the payment methods that the iTunes Store accepts in the Payment Type section. If you don't want a payment method on your account, select None in the Payment Type section.
Best Regards,
Jeremy

How can I get the Airport Express to handle all the PPPoE stuff?

Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
Direct ethernet cable connection to my Macbook works fine.
When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
thanks
Paul

How can I permanently disable the "fn" key?

Hi. My subject says it all. How can I permanently disable the "fn" key?
At first I thought I had a virus or something because when I typed only weird symbols came out. Then I reset the computer. Then I couldn't even log in. I tried Time Machine etc.
Then I realized that the "fn" key wasn't working right. It seems to be working backwards. It acts like it's being pushed when it's not, and when I do push it it acts like it's not being used.
So it's kind of a simple problem but it's really annoying.
Is there a way I can just disable it permanently? Even physical force if necessary. I tried to break it but it wouldn't break. I don't really use the key anyway so it doesn't really matter. I don't want to pay a bunch of money to replace a key I don't even use.
Thanks. I hope someone knows.

That's the best answer. Yeah usually if you press "fn" or "option" you can get it to work for awhile.
Yeah I have considered some kind of external keyboard also. It will make a laptop less laptopish. But it could do the job for awhile.
It's sad because I don't even care about the "fn" or "option" keys.
But anyway it's not catastrophic at least.
And yeah maybe we can get a new computer later or something. I like mine though. It's customized and is how I like it right now.
Anyway thanks for the reply.

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

How can I Hide/ Disable the Question mark and Exit button in the Top right corner of Link Bar of Excel Documents in SharePoint 2013?

Hi,
How can we Hide / Disable the Help(?) and Close(x) buttons which are located in the right corner of the Top Link Bar in the Sharepoint Document Library pages as well as Excel Web Access?
Our requirement is : When we try to view the Excel Services Report from another web site, Help(?) and Close(x) icons are also appearing in the Excel Web Access Web Part, but we don't want to display them in our site.
Please let us know the solution for this case.
Thanks in advance.
Regards,
Sanjana

Hi,
In the xlviewer.aspx, we can find the two buttons like this:
To hide them, you need to add the CSS into the xlviewer.aspx which stays in:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS
Best regards,
Patrick
Patrick Liang
TechNet Community Support

HT1473 I recently had to replace my hard drive and lost my iTunes library. Now I cannot transfer the library from my iPod to iTunes on the new hard drive (same computer). How can I complete the transfer?

I recently had to replace my hard drive and lost my iTunes library. When I try to transfer the content from my iPod to iTunes on the new hard drive (same computer), it would only let me transfer iTunes store purchases. How can I complete the transfer of all the content on the iPod back onto the computer?

Recover media from iPod
See this post for options on moving your iPod data back to your computer.
tt2

How can I completely disable Airport / BlueTooth?

Similar Messages

Maybe you are looking for