How can I configure a party such that this party can submit both 4010 and 5010 transaction?
I try to configure a party such that this party can submit both 4010 and 5010 transactions.
I encounter error related to ISA11 field.
When I submit a 4010 transaction, I need to uncheck the 'Use ISA11 as repetition separator' box in the X12 Interchange Processing Properties page of the party. If not I will encounter error if the character 'U' in ISA11 appears as content inside
the transaction.
On the other hand, if I submit a 5010 transaction and left the 'Use ISA11 as repetition separator' box uncheck, I will encounter the following error:
Error: 2 (Field level error)
SegmentID: ISA
Position in TS: 1
Data Element ID: ISA11
Position in Segment: 11
Data Value: ^
7: Invalid code value.
The character in ISA11 in 5010 transaction is '^'.
Is there any setting or trick I can use such that I don't have to adjust the 'Use ISA11 as repetition separator' box everytime a different version of EDI is submitted by the party.
Hi,
The problem you are describing is not because of Version of the document but actually it is because of different kind of ISA11s you are using for one party. It can happen with the same verion document as well.
So for solving it You can right a pipline component and put it before edi-receive pipeline component. In this pipline component you can search ISA11 and replace with 'U' if you do not want to use it.
But I think the problem will come further becauase if you have '^' in ISA11 then most probably you would be using it in document as repetition separator. So please check if you are not using '^' in the doc and then apply this pipeline component.
Thanks
Gyan
If this answers your question, please mark it as "Answered".
Similar Messages
-
The current set up is that I have my home network both in wired and wireless mode. All MACs are connected wireless through the dual band router (2.4 GHz) and have access to a wireless shared printer. I have also wired connected my TV through the router to access the Internet. I have an Apple TV wireless linked to the router (5 GHz) to play films on the TV
There are a few things I want to do.
I want to store my music and photos on the TC such that I can a) play music on any laptop, via the SONOS system or TV
I want to configure my SONOS bridge to be able to recognise that music is on the TC or pull music via Spotify
I want to be able to play music stored on the TC or display photos stored on the TC on the TV
I want to extend the network of the router without creating a new network
Any suggestions ?If you store itunes andn iphoto library on the TC you could be in trouble. The TC has no auto backup mechanism.. it is simply unable to work as a true NAS. It has no media servers. It is slow.. it is very easy to corrupt libraries especially in connection over wireless. In general we recommend people do not do this.
If you go ahead anyway.. apple have specific instructions for moving the libraries.. do follow it.
I am not sure if the SONOS can play directly from itunes library or has to use an itunes server.. remember the TC is a dumb as a board router with no media servers. Apple TV also need an active itunes to work AFAIK.. you cannot play files.. unless you JB the ATV.
Also be careful as SONOS does not like apple names.. use all SMB compatible names.. short, no spaces pure alphanumeric.
Finally yes,.. at last .. you can extend the wireless in the TC using another apple router.. you cannot extend wireless using any other brand. -
I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)
You cannot merge accounts. Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37
One computer using multiple iTunes Store authorizations - http://support.apple.com/kb/HT1206 -
How do I configure my IMac so that I can see/speak with someone using an IPad 2 ? Thank you
The Apple solution is to register for and use separate Apple ID's on both devices and Apple software:
Purchase FaceTime from the Apple Mac App store. (US$0.99 for Version 1.1 last time I checked).
The US iPad 2 already includes the FaceTime App.
I've read that Skype also works with a Skype app for the iPad, but I have not tried it. -
Hello,
I have several folders on my firefox toolbar which I use to sort new bookmarks by topic. If I add a new bookmark to a folder it is alwas placed at the bottom (below existing bookmarks) which is somewhat annoying with a increasing number of bookmarks. I would like to have the bookmarks recently added at the top of the folder (above existing bookmarks).
It's no problem to sort them this way within the library. But back at the toolbar everthing remains the same. The only option that seems to work here ist 'sort by name'.
Is there any way to sort the bookmarks by 'date added' such that new bookmarks are placed on top and this is applied also outside the library?
I hope you get my problem!
Thanks!I do not think there is a way to do that without add-ons
There are a couple of workarounds I am aware of
* Add the bookmarks manually in the bookmarks library and choose the position. That is using Show all bookmarks -> open required folder -> select a position and right click -> add new bookmark <br />Rather a slow and clumsy process
* Sort a folder and copy it. If you sort the folder contents then copy and paste them they remain in that order when pasted.
There are add-ons but I have not tried them. For example
* https://addons.mozilla.org/firefox/addon/simplesort-bookmarks/
* https://addons.mozilla.org/firefox/addon/auto-sort-bookmarks/
There will be others available and take note of the advice to backup bookmarks manaully.
* [[Restore bookmarks from backup or move them to another computer#w_manual-backup]]_manual-backup -
I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.
Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy -
Made big mistake of downloading Mavericks today.
Been struggling with all the FUBARd messes it caused, ALL DAY.
Google basic buttons don't work--can't log out or other basic functions.
Website use is impaired.
It took almost 3 hours to do a basic online order on one of them--at this rate, I'll be out of business soon, and it's seriously impairing Christmas preparations!
Google Voice/Video are screwed up, had to RE-download their voice/video plugin all over again--again.
Voice/video quality is REALLY poor.
Lag times in so many things are bad.
Thought this would download WITH the better writing/bookkeeping programs--NOT!
Mac Maps is piddle compaired with GoogleMaps.
The Email program on the desktop is REALLY hard to use, has few useful functions. It's MAYbe good if one only has ONE email; using it with severeal various email accounts is a serious liability in many ways--like filing, sorting, marking, etc.; no clear way to move email files to an external drive to save, to unload the HD.
HOW can Safari and Mavericks be fixed?
IF not, HOW can I REMOVE Mavericks and get back to Mountain Lion--which was not too great, but certainly more functional than Mavericks!
I NEED my web-based emails to work--NOW...NOT when Mac finally gets around to fixing things sometime later.
I NEED online ordering to work--NOW--not later when Mac finally gets around to fixing things.
PLEASE someone--any help out there? I couldn't even find but a rare hint that Safari 7.0 even exists--much less that anyone admits it's got problems, nor fixes for it.
What to do? Throw the whole unit out? Wipe and reboot? Dumb it back to OS 10? HOW? WHAT?
[freaking out here...]Zak Adelman, LexSchellings,
It's a shiney new computer. Came loaded with Mountain Lion.
Too busy learning to use the blessed thing, to download anything....except...
The only pluggin that had to be loaded, was Google Voice-Video pluggin, while Lion was still it's OS. [AND been using the Safari that came already in it.] Had to do that a couple times--nothing new there--that plug-in had to be re-loaded when using a PC, too--THAT happened even before Google slammed everyone into coerced use of it's Google+.
[I understood from others, that Firefox won't work in Mac units--or I woulda put that in it to see if that solved anything]
This unit seemed a bit sluggish from the git-go, out-of-the-box.
I figured that was probly the local DSL here---rural DSL is...um...our DSL's not something to brag about, but it's the best we can do...
The difference between speed of loading pages, etc. on the new Mac, was --not-- toooo terribly different--though yes, slower on Mac....and chalked it up to my inexperience with Mac.
Been trying to get things up and running for a bit over a month now.
NOT doing very well at it--just barely getting by; rapidly falling behind what needs done [work].
Google worked just --OK-- when OS was Lion, as did the Google voice/video--slower, and voice-video was kinda scratchy or glitchy, but worked enough to --get by--.
Loading Mavericks, ruined that.
VOIP calls via Google talk have bad echio, static, cut-outs; video calling was pixilated or not working; WAS cued to re-load it's Voice-Video plug-in....which seemed to help a bit, though not very well; it only helped the Voice-Video some, not all--figured that was probably Google issues, less than Mac's, since Google has been increasingly dysfunctional as they have twisted it to be a social media-dominant thing.
[[now seeking an email venue that does what Gmail was good at, including the Voice-video calling, that has no intention of turning itself inside out to be "social"]]
Can't sign out of Gmail or Google+, nor use buttons in upper right corner with the drop-down menu.
NO buttons in upper right corner cluster on Gmail work, except the name+ button to toggle over to Google+---which I don't need! [yeah--THAT's a Google problem!]
Can only switch to HTML version by catching that button as the account signs in--if one fails to be fast enough with their fingers, it goes to Google+; can't get to email unless type in mail.google.com.
Managed to catch that button today, and clicked to use HTML "permanently" until these issues get solved.
ALSO:
Have fairly new [about 1 year?] HP bluetooth printer-scanner.
BUT, after Mavericks loaded: it HAS the unit listed, HAS drivers for it, HP unit IS listed as default printer, everything --seems-- "go",
.....except Mac keeps posting it's out of ink, and/or, not hooked up, and/or not turned on--even when it is on.
It's SUPPOSED to be blue-toothing that printer/scanner.
It did it for Lion, before loading Mavericks, even though it was troublesome to get it to work, it at least HAD printed one document when Lion was the OS.
Thank you...Downloaded EtreCheck:
BTW: Trying to copy/paste data from that check list, to this post, was achaic:
had to use Edit, select all, then use edit again to get it pasted--the mouse buttons weren't allowed to copy-paste using right-click functions [is this a relic limited-function "thing" with Mac?, or is it because I wanted to keep using this new wirless, non-Mac mouse?].
Advice?
See below...
Hardware Information: Mac mini (Late 2012) Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2 cores; 8 GB RAM
Additional:
Monitor used = Visio flat screen. [not Mac]
Keyboard = Logitech solar wireless [not Mac]
Mouse = Logitech wireless
Video Information: Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9 (13A603) - Uptime: 2 days 19:33:25
Disk Information:
APPLE HDD ST500LM012 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (456.94 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
MediaTek Inc MT1806
Logitech Logitech USB Headset
Logitech USB Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.google.keystone.daemon.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.hp.devicemonitor.plist
[loaded] com.hp.messagecenter.launcher.plist
User Launch Agents:
User Login Items:
iTunesHelper
SpeechSynthesisServer
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 4.9.1.16010
====== npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 ===[this was in red]=====
googletalkbrowserplugin: Version: 4.9.1.16010
Bad Fonts:
None
Old applications:
HP Device Monitor: Version: 2.7.0 - SDK 10.5
/Library/Printers/hp/hpio/HP Device Monitor.app
Time Machine:
=== Time Machine not configured! ===[this was in red]===
Top Processes by CPU:
6% WindowServer
4% Safari
4% SafariDAVClient
2% EtreCheck
0% com.apple.iCloudHelper
Top Processes by Memory:
303 MB Mail
270 MB Safari ======[this is version 7.0 ]======
262 MB mds_stores
147 MB softwareupdated
147 MB com.apple.IconServicesAgent
Virtual Memory Statistics:
1.77 GB Free RAM
2.85 GB Active RAM
2.36 GB Inactive RAM
1017 MB Wired RAM
4.64 GB Page-ins
111 MB Page-outs -
How will i configure third party billing
how will i configure third party billing....
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material u2013 Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Also please go through this Building block
[Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
thanks
G. Lakshmipathi -
My hard drive crashed and nothing recoverable, local Apple Store installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?
A blank drive needs to be formatted first, you do that hold c boot (or hold option key boot) from the 10.6 install disk (or Lion USB)
Read how to format the drive in Disk Utility here
https://discussions.apple.com/docs/DOC-3044
How to install OS X
https://discussions.apple.com/docs/DOC-3251
Software Update fully,
Hold the option key and click on Purchases when in MAS to download your 10.7 etc. -
I have apps from old work account that I can't remember the password to. On my personal phone those apps keep showing up but I can't update them because I can't remember the password. How can I delete them and download on my new account?
Tap and hold an app until they all start jiggling and an X appears in the icon's top left corner. One by one tap the X to delete the app. when they are all gone you are free to buy them again with your own account.
-
a phantom folder with the name of a folder that held photos has appeared in my finders>places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?
Can you drag it off holding down the CMD key?
Do a search for it with EasyFind (try different settings in "Operator")
http://www.devontechnologies.com/products/freeware/ -
Hi, I got a virus that does not let me use Safari. I downloaded an av from the app.store but it did not detect anything. I am thinking in formatting the HD. How can I do it and will I lose?
1. Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
2. Safari > Preferences > Extensions
Turn those off and try Safari.
3. Safari > Preferences > Privacy > Cookies and other website data:
Press “Remove all website data” button.
4. If adware is installed without your knowledge,
download free AdwareMedic by clicking “Download ” from here
http://www.adwaremedic.com
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done scanning and removing the adware, quit the app by clicking AdMedic in the menubar
and selecting “Quit AdwareMedic”. -
If I'm suspecting that I'm hacked, how can I confirm it and how can I Un-hack/get rid of it ?
Knowing that when I turn On my Macpro, the Apple logo appeares late and always when Im connected to the WiFi It notifys me that there is someone using my IP address!!You aren't being hacked. Your wireless network is probably misconfigured and/or hacked. Turn on WPA security and then reboot it.
-
How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?
skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR -
How do I configure my system so that Oracle 10g properly shuts down and sta
How do I configure my system so that Oracle 10g properly shuts down and starts up when I reboot my Solaris system?
http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref255
Maybe you are looking for
-
I work for a university and teach IT courses to undergrad and graduate students. The details below are pertaining an isolated lab environment I had a storage failure in my lab and the DCs became corrupt. This is a university lab environment so there
-
Hello to everybody. To explane my scenario I will give you an example: Storage type CT1 has several storage bins. Every storage bin can contain one or more HU. I can set the maximum number of SU that the bin can contain in the putaway strategy P. Thi
-
FCP6 and QT 7.6.4 crash on video import
Time after time, FCP and QT have crashed after importing videos. If the videos have been exported previously, then they work fine in FCP 6 and QT 7.6.4 The are .AVI and .MOV files. One file was a .MOV file that was converted from .MTS on another mac.
-
Hi guys, All new to Garageband with a recent purchase of a schmick new iMac, should of moved to mac a long time ago! I am wanting to know how I can loop part of a song? For example, I have a song that has a cool intro and I want to extend only that p
-
Topics Won't Open; New RH Upgrade to 9
I have upgraded and updated to RoboHelp 9. Opened my project and it upgraded correctly. Yesterday, the topics opened in the workspace, today they don't. I have double-clicked the topic and nothing happens. Right-clicked and selected Edit Topic and