How can I configure a slightly different initrd for lts kernel ?

Hi,
Because of the uas problem with my external usb3 harddisk (see uas problem in linux 3.15.1, need advice on the problem), I needed to add a quirk file: /etc/modprobe.d/ignore_uas.conf
It works fine with the standard kernel, but with the lts kernel, it causes systemd-modules-load.service to fail. I think it is because the lts kernel does not know this quirk.
Is there an elegant way to make mkinitcpio ignore this file for the lts initrd by configuration ?
I really do not want to remove / re-add this file every time one of the kernels is updated. Or when both kernels are updated at once, I do not want to remove it, create the lts initrd once more manually, then re-add it ...
Thanks and Regards,
Markus

OK, back to topic :-)
I just did a bit of research about /etc/mkinitcpio.d/ (indeed, I already have two .preset files), but I could not find any information about excluding files from /etc.
Maybe I should have asked about how to exclude files in general.
What I found out is that the files from /etc/modprobe.d are added by /usr/lib/initcpio/install/modconf.
My current idea is to copy it to /usr/lib/initcpio/install/modconf-lts and change it a bit.
But here comes the next problem: For this solution, I would need tow different hooks lists for the standard and the lts kernel. But te hooks list is configured in the global /etc/mkinitcpio.conf, not in the preset files.

Similar Messages

  • In Multimapping how can we configure the Receiver , Interface Deter for BPM

    Hi Friends ,
    I am trying the the BPM scenario using Integration Process
    BpmPatternCollectTime
    from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
    I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
    I am using a File Sender Adapter and Receiver Adapter .
    It is Successfully picked up the File but nothing is happening after that .
    I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
    But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
    I have checked in SWWL my Integration Process Return code is "0"
    The steps Which i have followed in BPM are
    1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
    Block Start and Block End as New Transaction
    2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
    3. Transformation Step
    It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
    4. Send Step
    It sends the New Message . It creates the New Transaction .
    Can you Please tell me how to configure the Receiver and Interface Determination for the above scenario ?
    Regards.,
    V.Rangarajan

    Hi Ranga
    have a look at these
    you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
    More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm
    if useful pls reward

  • How can I configure FireFox security setting globally for all users on a PC? Is there something I can do in group policies or throught the registry to insure all users have the same settings?

    Our Bank's core processor has rewritten their product to run in a web browser. Their browser of choice is Firefox 3.6. The specifications from our core processor specify specific security and settings parameters that must be adhered to by all users for their product to run properly. Is there a way to globally configure these settings via the registry or group policies to insure everyone who logs in to a given workstation opens Firefox with the same settings? Thank you for any assistance you can provide - Steve Gish, First Bank Kansas.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can try:
    *http://kb.mozillazine.org/Locking_preferences

  • How can i configure firefox single sign-on for urls on citrix environment to affect all users

    Hello,
    i tried to configure single sign-on on firefox, which is published on our citrix environment and i tried to setup it as per this article "http://support.citrix.com/article/ctx120598" this method and it only applies for a single user, is there any way of doing the config to apply for any user which is loged via citrix session...?
    Thank you,
    Manoj.

    you can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values for all users and profile folders.
    Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0);
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, allow changes in current session
    lockPref(); // lock pref, disallow changes
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

  • How can i configure itunes 11.1.4 in windows 8.1

    itunes 11.1.4 do not open  in windows 8.1 could you help explaining how can i  configure ?

    Hey fhiggins43,
    Thanks for the question. The following article may assist you in achieving your end goal:
    iTunes 11 for Windows: Require a prompt before automatic syncing
    http://support.apple.com/kb/PH12320
    Require a prompt before syncing all iPod, iPhone, and iPad devices
    1. In iTunes, choose Edit > Preferences.
    2. Click Devices.
    3. Select “Prevent iPods, iPhones, and iPads from syncing automatically.”
    To sync your iPod, iPhone, or iPad when a prompt is required, connect your iPod, iPhone, or iPad to your computer, choose your device from the Devices pop-up menu near the top of the iTunes window, and click Sync.
    Thanks,
    Matt M.

  • Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

    Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

    There's more to it than that.
    Folders in Aperture do not hold Images.  They hold Projects and Albums.  You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
    The relationship between Projects and Images is special:  every Image must in a Project, and can be in only one Project.
    Images can be in as many Albums you want.  Putting an Image in an Album does not move it from the Project that holds it.
    You can make as many Versions from a Master as you want.
    What you want to do may appear simple to you, but it still much adhere to how Aperture works.  I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
    It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful.  If you haven't, take a look at the video tutorials on Apple's Aperture support site.
    I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

  • HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

    please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
    "We're sorry, we are unable to continue with your activation at this time."

    You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

  • How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

    I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

    On the Mac in System Preferences > iCloud
    Make sure Mail & Notes is selected.
    ON the iPhone tap Settings > iCloud
    Make sure Mail is switched on.
    And try restarting your Mac and iPhone.

  • How can I share between 2 different accounts.  we have a clinic that serves pediatics and unfortunately, they set up two different accounts within our agency.

    How can we share between two different accounts on the same iPad?  We have a therapy clinic with 2 devices and want to share apps. I did not set up the second one, but how can we fix this ?

         Hi Rosdy, to get the most out of iCloud it is recommended that you use the same account between devices. Thus whenever you buy something on your phone it becomes accessible from your laptop regardless of whether your synced it over usb or not. *
         For more information on iCloud usage please click here.
    * This feature requires that both devices be on the same WiFi network.

  • How can i share documents with different users on the same mac?

    How can i share documents with different users on the same mac?

    Shared how? The other users can read the documents or you all can read and write the documents?
    The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
    The second is a bit trickier.

  • How can we choose to have different apps, different playlists, different contacts, etc., on each device., while using one itunes to sync more than 1 iphone

    How can we choose to have different apps, different playlists, different contacts, etc., on each device., while using one itunes to sync more than 1 iphone

    Use Multiple Devices with One Computer
    How to use multiple iPods, iPads, or iPhones with one computer

  • How can I configure my new Mac Pro to output the timeline via HDMI

    How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
    If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
    Thanks,
    GEvans
    DarthPro
    3.7 QCIntelXeonE5
    12 GB
    AMD FirePro dual D300 2048MB
    OSX 10.9.2

    If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
    If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
    Any more requires ACTIVE Adapters.
    The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
    StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

  • HT4356 How can I configure the printer to print only grey tones from my iPad 2? Printer=Hp6520

    How can I configure printer with iPad to print only grey tones? This works fine from my laptop - not air printing from that one though.  I can't find anywhere on the iPad how to do printer settings and this also seems not to be available as an option when doing a printout.  In fact, no options seem to be available.  Thanks in advance for reacting!
    Hermi

    There is currently no option for this. You can give Apple feedback here:
    http://www.apple.com/feedback/ipad.html

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How can I configure a VM to boot from USB key in Virtual PC of Windows 7?

    Hi all,
    I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
    Thanks for any help.
    Scorprio
    TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

    Hi all,
    I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
    Thanks for any help.
    Scorprio
    TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin
    Virtual PC does not support USB.  Windows 7 XP Mode Virtual Machine supports the use of USB devices.  Virtual PC and Windows 7 XP Mode VM are not the same thing!

Maybe you are looking for