How can I configure an OSGI component to run only in author mode and not in publish mode?

Using scr annotation we could do the same my mentioning "@scr.property name="run.modes" values.0="author" values.1="publish"" , but how to do that with org.apache.felix.scr.annotations.Property annotation ?

Hi Cyprian,
How have you configured your OPC Server tags? Are they strings of floating point type? What type of server is being created?
Also, what's the end goal of this? Generally speaking NI OPC Servers is used to communicate to a PLC as you have seen.
Jared S.
Applications Engineering
National Instruments

Similar Messages

How can I change one section of the document to a landscape orientation and not the whole document?

How can I change one section of the document to a landscape orientation and not the whole document?

Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry

How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?

How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?

Souvent eu ce problème,
Je cree un dossier sur le bureau et glisse les photos à partir d'Iphoto dans ce dossier. Ce geste a pour effet de creer des copies dans le dossier.
Il ne reste plus qu'à selectionner ces photos pour les envoyer en pièces jointes.

HT200150 how can i find my iphone if i have just the apple id and not the icloud ?

Hpw can I find my iphone if I have just the apple id and not the icloud too ?

Did you enable and install find my iphone prior to losing your phone?
If you didn't then you won't be able to use it.

How can I print out the graph I need only, without the controls and indicators?

I'm doing some programming in LABVIEW. I need to print out only the graph, without the buttons, controls, indicators. I tried to look for such a function in LABVIEW, but in vain. How can I achieve the result I expect in my programming?

Hi Fenny,
you should use the report generation functions to create a report containing your graph image and print it.
Take a look at the Sample Test Report.vi you find in the report examples of LV.
Just look at the part of the diagram where it is used Append Control Image to report.vi (in the center of the report functions chain); a graph reference is wired to the Ctrl reference input ( to create a reference of your graph right click on it and select create reference).
Let me know if you need more help,
Alberto

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can I have the most recent message in a thread shown first and not last

Thunderbird (used in conjunction with Gmail - I believe the term is mail client) message threads commence with the oldest; how can I make Thunderbird messages commence with the latest message?

How do I get around this?
'''Workaround:'''
Right Click on the first email in thread and choose:
'open message in Conversation'
This open in a new tab and will include all emails both received and sent by you in that conversation.
It will appear just like the oiginal view with oldest on top.
Then click on the thread icon to remove the 'threaded' view.
in my case the list is then sorted by Date with newest on top. So easily identifying the newest email.
But if required you could clickon Date column header.
Additional:
Note: If the new email in the thread is unread:
View > Threads > Threads with unread
This will produce a list of the received emails in the thread
If you then remove the threaded view by clicking on the thread column header, it will list emails by Date in whatever order you desire.
Unfortunately, this only works with an unread email, so once you have read that email you cannot easily do this again to locate the email in the conversation unless you use the Workaround previously described.

I use i-tunes for backing tracks with an acoustic band...how can I get a playlist to play one song at a time and not go to the next one until I manually select it?

I use i-tunes for backing tracks. How can I set up a play list to play only one song at a time and not go to the next one until I manually select it?
Thanks

Uncheck all the songs in the playlist. iTunes will then play one song and stop.
Regards.

How can I get iPod touch with IOS5 to sort by song artist and not album artist?

Since updating to IOS5 many song artist are missing. I set up iTunes to sort on song artist but when I sync, my ipod tyrs to sort by album artist not song artist. How can I get the ipod touch to sort by song artist???? Most of my Song artists show up under Various which is the entry for album artist. Please help! I have aver 9000 songs with this problem. If I can't solve this issue, I will have to return to using my Toshiba Gigabeat which allows me to sort be album artist. IOS-5 was a step backwards.

Go to settings.
Music> Turn off Group by Artist

HT4539 how can i download previous purchases app but i only have apple ID and don't have password

I had no longer used my old apple ID and i don't remeber the password and can't even reset the password becasese i had cancle my old internet provider . How can I transfer my previos purchases app to my new apple ID ?

Hi...
You can't. Purchases cannot be transferred from one Apple iD to another.
You will have to repurchase the apps using your new Apple ID.
Frequently Asked Questions About Apple ID

My icloud is linked to my husband's icloud. How can I change it so that my itunes email address shows up and not my husband's? All my apps also go to his phone. None of my pics, or apps were saved on my phone. I think because it has his itunes info.

My husband and I traded phones a week ago. Now I have my phone back. So when I got my # back I tried to recall all my stored data via icloud but nothing except contacts was retrieved. At ATT they said they could tell that I have over 200 photos but we couldn't recover any of them. They said all I had to do was recall them from icloud. But it didn't work. Now my husband says every time I download a new app it also gets it. We share the same itunes account but different icloud accounts. So what can I do? I made an appointment with the genious bar at the Apple Store but I am anxious to try to fix it before my appointment time in 2 more days. Any help would be appreciated. Thanks!

Welcome to the Apple Community.
To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services.
To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
It appears you want to remove his ID from iCloud on your device and add your own back, you can do this at settings > iCloud > Delete account and then sign in again using your Apple ID. By doing this your data should be added back to your device, unless your husband has deleted it when using your ID. Photo stream is a little different.
Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.
You should also decide whether you want to share your iTunes content with each other. If you do share, you can stop the apps and music etc., that he buys on his device downloading to yours by turning off automatic downloads on your device at settings > iTunes & App Stores.

How can I fix my iSight settings when it works on one account and not the other?

iSight continually crashes third party applications. I've checked another account on my MBP, and iSight works on different accounts. What settings can I troubleshoot on the account?
Thank you!

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway. Turn Time Machine OFF in its preference pane while copying the volume.

How can I get my laptop to recognize my iTouch as an iPod and not a camera?

I am using a newly bought Inspiron N5110 from Dell that runs on Windows 7. I want to tranfer my music from my iPod to this compter but can't do this. When plugged in, the computer recognizes the iTouch as a camera and not an iPod. It is recognized under my devices on my iTunes but when I look through my "Devices and Printers", it is clearly seen as a camera. I cannot access the music on my device--only the photos.
When I try updating the device driver as many sites have suggested, my computer says the device's driver is up to date and I cannot change it.
I have tried, several times, to uninstall and reinstall the driver but nothing works. Can anyone suggest something to fix this?

This may be of Help...
https://discussions.apple.com/message/10848866

How to get Illustrator 10 to run on windows 7 ultimate and not in XP mode?

I have been running Illustrator 10 on windows 7 pro with no problems. I upgraded to a new computer with windows 7 Ultimate and Illustrator will only run in XP mode. It will not open my existing files stating that they were created in a newer version.
How can Illustrator be run in windows 7 Ultimate?

Actually, if you go to the program .exe file (usually in Program files(x86)\Adobe\Illustrator 10\Support Files\Contents\Windows).
Right click on it and select properties.
Select the Compatibility tab.
In the section "Compatibility mode".
Check the box "Run this program ...."
From the dropdown list select Windows 7
In the "Settings" section
Check "Disable visual themes" and "Disable desktop composition"
This will allow Illustrator to run normally in Windows 7 Pro and Ultimate 64bit systems.

How can we add elements to component at run time through java

Hi,
In my project ,I am using JArrayList to collect urls and I need to add those to JScrollPane(JTextArea) and this to frame. This works fine but I need the process of how the elements added to ArrayList simultaneusly added to JTextArea.
pls suggest the way

arrayList.add( someObject );
textArea.append( someObject.toString() );

How can I configure an OSGI component to run only in author mode and not in publish mode?

Similar Messages

Maybe you are looking for