How can I configure EM after machine name changed?

Dear all,
How can I configure EM after machine name changed?
Thanks in advance.

You can change it for Management Agents, but you need to re-install OMS if the hostname for the OMS host has changed.

Similar Messages

  • MSA Conntrans fails after machine name change

    Hi
    I have 5 remote laptops that have had their name changed and conntrans will no longer work.
    When I ran  SELECT @@SERVERNAME  on database it retunred old name so I then ran 
    sp_dropserver  'oldname'
    sp_addserver 'newname' , local
    Stop / start SQL server 
    SELECT @@SERVERNAME   now returns new name . However Conntrans still failing. Is the machine name embedded anywhere else ?
    The mobile application does open it appears to be just the conntrans process that will not function.
    Has anyone done this before ? Is it possible ?
    Best Regards M

    Hi Melita,
    Please check note 1253027. This should solve your problem.
    regards
    Vivek

  • After a clean install, how can I continue using Time Machine?

    After a clean install, how can I continue using Time Machine?
    I booted from my recovery partition, erased my HD, installed the same OS, (Lion, 10.7.5) then restored from my TM.
    If it asks if i want to use TM, I say yes. When I chose the drive, it seems to want to start all over, instead of just picking up where I left off.
    Is there any way of picking up where I left off?

    Hi Frank,
    You are sure you looking in your Library in /Users/YOUR_USERNAME/Library and not /Library at the top level of your harddrive?
    When you open iCal what do you see?  Are the calendars the two default Home and Work ones?
    I really appreciate the responses -- especially if you are in the UK as opposed to Ontario.
    Why, do you have something against London Ontario?
    John M

  • How can I configure MA to display "speaking" OpCode and Task names

    If you have a custom ETW Eventsource definition: PerfView reads and Displays from the etl files the OpCode and Task values not as integer but as defined in EventSource inner classe for Task and in the
    System.Diagnostics.Tracing.EventOpCode. My question is, how can I configure the MA to display the values not as "magic numbers" or can MA get this feature?
    Regards,
    Alexander
    Kind regards, Alexander

    Hi Paul,
    please take a look to the attached picture. I've tried to make a comparison between automatically behavior of PerfView and Message Analyzer by displaying of the same performance log. The Message Analyzer got metadata, generated with wevtutil. The related
    part of the manifest is here:
    <tasks>
    <task name="ReadingFromGdb" value="1"/>
    <task name="LogReadPreInvoke" value="65532"/>
    </tasks>
    <opcodes>
    </opcodes>
    <keywords>
    <keyword name="Perf" message="$(string.keyword_Perf)" mask="0x8"/>
    <keyword name="Gdb" message="$(string.keyword_Gdb)" mask="0x10"/>
    </keywords>
    <events>
    <event value="8" version="0" level="win:Verbose" message="$(string.event_LogGdbReadPreInvoke)" keywords="Perf Gdb" opcode="win:Start" task="ReadingFromGdb" template="LogGdbReadPreInvokeArgs"/>
    </events>
    <templates>
    <template tid="LogGdbReadPreInvokeArgs">
    <data name="fullName" inType="win:UnicodeString"/>
    <data name="methodName" inType="win:UnicodeString"/>
    </template>
    I hope, it helps you to understand details of my questions.
    Regards,
    Alexander
    Kind regards, Alexander

  • TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

    Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

    sonjadg,
    you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update  to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

  • How can I get my time machine to allow me to recover files again? After upgrading to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.

    How can I get my time machine to allow me to recover files again?
    After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
    I've searched and can not find a solution to the problem that's being encountered.

    Yeap that all makes sense now.
    Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
    Over wireless are you waiting for the indexing to finish.. ??
    Previous backup may not show for a couple of hours.
    Long short of it.. Mavericks version of TM is a pain.
    Sometimes it is easier to completely ignore the TM backup and do the restore manually.
    I have posted the details here. See if this helps.
    Can't access old files on time capsule

  • How can i configure autologin with network account?

    right now when i go to user preferences for network account, login window and options are non manageable for network users.
    im using network accounts on all public machines and now after reboot they all require manual logon, how can i configure autologin to use network account

    Did you try authenticating with a local admin account to get into the login options from a network user account? Then you might be able to set auto login for that account. I've set network accounts as admin users on particular machines that way.

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • I'm told there is a virus associated with Adobe Reader. How can I tell if my machine is effected and if so what is the cure. I'm running OS X10.6.8 on an iMac with safari 5.1.5

    I'm told there is a virus associated with Adobe Reader. How can I tell if my machine is effected and if so what is the cure. I'm running OS X10.6.8 on an iMac with safari 5.1.5

    There are no viruses currently affecting the Mac but there is something called Flashback which is malware that has been doing the rounds and affected many Mac users. Apple have released some updates to Java that should remove it and improve protection. Run Software Update to see if there is anything for downloading.
    A few precautions that can help prevent your Mac becoming infected:
    If you use Flash only download it directly from Adobe.
    In all web browsers disable Java (but do leave Javascript on as that's something else).
    In all web browsers make sure downloaded files aren't set to automatically open after downloading.
    Consider disabling Java completely (launch Java Preferences in the Utilities folder and disable it - you'll likely rarely, if ever need it. If you do just turn it on and off again when your done).
    You can also check out this link:
    http://lifehacker.com/5900434/how-to-find-out-if-your-mac-was-infected-by-the-fl ashback-trojan-in-one-click

  • How can I see which computers (computer name) Creative Cloud is installed on?

    How can I see which computers (computer name) Creative Cloud is installed on?

    Hi Arno ten Hagen,
    To check for activation you need to go to all the machines in which you have installed CC apps, launch any of the CC software, go to help and you will see the email address mentioned by which you are logged in to that machine.
    Kb: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html .
    Regards,
    Romit Sinha

  • How can I configure a VM to boot from USB key in Virtual PC of Windows 7?

    Hi all,
    I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
    Thanks for any help.
    Scorprio
    TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

    Hi all,
    I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
    Thanks for any help.
    Scorprio
    TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin
    Virtual PC does not support USB.  Windows 7 XP Mode Virtual Machine supports the use of USB devices.  Virtual PC and Windows 7 XP Mode VM are not the same thing!

  • How can we configure in MSS to view Employee work schedule?

    Hi,
    How can we configure in MSS to view Employee work schedule?
    Regards,
    Poornima

    Hi,
    Can you please tell me what is your exact requirement?....
    I think in the standard MSS package there is an iview for viewing the workschedule related information like Hours/day, Hrs/week, hrs/month and hrs/year for a position.
    However, if you want to view the workschedule for employee, it can easily be configured through the OADP.
    You can create a custom Function module for fetching the workschedule for each employee and after creating a custom column, add it to any data view.
    Thanks,
    Pinki

  • How can I do auto-sort-by-name

    In previous PSE(8/9/10), after change to folder view in EO, the files/Photo in folder selected will be sorted automatically by name, but I cannot sort by other methods (no [Sort By]).
    However, in PSE11, folder view has gone. I can sort by Newest, Oldest and Import Batch. but I want to know how can I do auto-sort-by-name?

    Lily~Lily wrote:
    In previous PSE(8/9/10), after change to folder view in EO, the files/Photo in folder selected will be sorted automatically by name, but I cannot sort by other methods (no [Sort By]).
    However, in PSE11, folder view has gone. I can sort by Newest, Oldest and Import Batch. but I want to know how can I do auto-sort-by-name?
    See that other post:
    http://forums.adobe.com/message/4815430#4815430
    I don't think it's possible to sort alphabetically in PSE11

  • How can I validate data after writing and over reboot/powercycle?

    Hi,
    How can I validate data after writes are done? How can I validate data after reboot or powercycle of the machine is done?
    What are the options I should give while running vdbench? When should I use -v, -vq, -vt, -v -j, -vq -j, -vq -jr, -v -jr options?

    Please look for the "Data Validation and Journaling' chapter in the documentation.
    Henk.

  • How can I configure a larger vertical range of 5622

    I'm generating RF signal using RFSG 5673 at IQ rate of 20 MS/s. Whenever I feed RF signal to 5663 to get RFSA response, a "Warning" message displays on RFSA Soft Front Panel with Status code: 213401 & 223532.
    So, please let me know the procedure of configuring the vertical range of Digitizer(5622) of 5663. 

    Hi all,
    I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
    Thanks for any help.
    Scorprio
    TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin
    Virtual PC does not support USB.  Windows 7 XP Mode Virtual Machine supports the use of USB devices.  Virtual PC and Windows 7 XP Mode VM are not the same thing!

Maybe you are looking for