How can I configure latest Lightroom to FTP upload using explicit FTP over TLS?

?

It would help to know which plugin you're using, but in general: ftp preset includes 'Protocol' which can be FTP or SFTP.
I *think* SFTP will use TLS if possible.
Whether it actually uses TLS vs SSL2... - I dunno: I suspect it will use TLS if supported on server, then down-shift to reglar SSL if need be, but I'm guessing. If you need to assure that only TLS is used (no down-shifting), you'll need some input from somebody else in the know - consider asking question direct to adobe:
http://feedback.photoshop.com/photoshop_family/topics/new
My guess: only way to assure specific security protocol is to go through 3rd party app.
Rob

Similar Messages

  • How can i configure DAQ card other then NI using MAX

    Hi,
    I am using Advantech DAQ pci1711, can i configure this card using NI MAX. I am getting problem with its port specification while writing VI's because could get channel port addresses.

    MAX can only configure cards that use the Traditional NI DAQ and DAQmx.  Advantech uses their own drivers.  Does Advantech have a utility for setting up their PCI cards?
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • I have a Dell AIO 944 printer, how can I configure my Mac, running Lion, to use it?

    Where can I find a down driver so I can use my Dell  printer with the Mac?

    Hey viviane,
    The first thing check with the Dell printer Support Site with the printer specific Model.
    If it display's any software for the Mac OS X, Download it from the www.dell.com/support .
    If the Dell printer does not have software on Dell site itself.
    It means the specific Dell Printer does not support Apple Mac OS X.
    In Apple some specific Dell printers are not supported by Apple.
    OR
    Try Searching for software in Apple Downloads from from Apple site.
    and check this Link to.
    http://support.apple.com/kb/HT3771

  • How can I configure Speech Recognition to open specific applications

    Hello Folks,
    How can I configure Speech Recognition to open specific applications, such as Lightroom, Firefox, etc.?
    Is there a way to add documents to do this to the speech preferences folder?
    I see an applications folder for example for "mail", can I add one for more applications?
    Any help would be appreciated.

    In the early days of it I gave it a try out of curiosity. It was quirky then, too. It does appear to be much better but Apple still doesn't help much with documentation on making the most of it. And, they tend to leave much work to the user to maximize its usefulness. I suppose that's why many users would rather spend the $199 for Dragon Dictate - it takes all the mystery out of speech recognition.
    But still speech recognition in OS X is really a way of issuing commands. It doesn't type while you talk like Dragon Dictate or Dragon Express.

  • HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

    please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
    "We're sorry, we are unable to continue with your activation at this time."

    You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

  • How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

    I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

    On the Mac in System Preferences > iCloud
    Make sure Mail & Notes is selected.
    ON the iPhone tap Settings > iCloud
    Make sure Mail is switched on.
    And try restarting your Mac and iPhone.

  • How can I configure my new Mac Pro to output the timeline via HDMI

    How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
    If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
    Thanks,
    GEvans
    DarthPro
    3.7 QCIntelXeonE5
    12 GB
    AMD FirePro dual D300 2048MB
    OSX 10.9.2

    If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
    If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
    Any more requires ACTIVE Adapters.
    The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
    StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

  • How can I set up lightroom 5 in my macbook, so that it becomes my default editing program, so that it starts up when I insert my sd card into the mac

    How can I set up lightroom 5, so that it becomes my main / default editing program & that when I insert my sd card into the mac lightroom starts instead of iPhoto .

    Thanks.  Im new to apple, which preference?
    Sent from my iPhone

  • How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration
    Just don't install the sample schemas. See the installation guide
    http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
    Using the Database Configuration Assistant
    When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
    Choose a custom install and don't install the sample schemas.
    All other schems/tables installed are REQUIRED by Oracle

  • HT4356 How can I configure the printer to print only grey tones from my iPad 2? Printer=Hp6520

    How can I configure printer with iPad to print only grey tones? This works fine from my laptop - not air printing from that one though.  I can't find anywhere on the iPad how to do printer settings and this also seems not to be available as an option when doing a printout.  In fact, no options seem to be available.  Thanks in advance for reacting!
    Hermi

    There is currently no option for this. You can give Apple feedback here:
    http://www.apple.com/feedback/ipad.html

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How can I configure a VM to boot from USB key in Virtual PC of Windows 7?

    Hi all,
    I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
    Thanks for any help.
    Scorprio
    TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

    Hi all,
    I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
    Thanks for any help.
    Scorprio
    TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin
    Virtual PC does not support USB.  Windows 7 XP Mode Virtual Machine supports the use of USB devices.  Virtual PC and Windows 7 XP Mode VM are not the same thing!

  • How can i configure advance payment to vendors through cash jounal

    how can i configure advance payment to vendors through cash jounal pls its urgent for me kindly help me out

    HI,
    I think u need not configure anyting new for this, you can use the existing Business Tran. Type K and rename it as Vendor Advance for separate identity. You can do the normal FBCJ posting.
    But doing this you will not have separate identity for the Advances paid.
    Thanks
    VK

  • How can I set up Lightroom 5 to be my default editing program instead of iPhoto in my macbook? [was: Lightroom]

    How can I set up lightroom 5,to be my defualt editing program instead if iPhoto in my macbook.

    Try 2 Ways to Change the Default Application to Open Files With in Mac OS X

  • How can i configure STMS with out physical systems

    Dear Experts ,
    please solve my doubts
    here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities
    and i started some activities also
    presently my doubt is in STMS configuration
    here i have only one system (DOMINE CONTROLLER) and we need to other systems while configuration but we dont have other systems like quality and production how can i configure that systems in my landscape
    this is my first implementation Experience please suggest me with some valuable suggestions
    my doubts:
    while creating systems we need to take for virtual systems or Extended systems
    which transport routes can i prefer for Dev to Qly systemand also Qly to Prd
    please reply me
    Regards

    Hi,
    If you have decided the SID's of the QUA and PRD systems then you can configure TMS with the virtual systems. Here are the steps to do so.
    Login to the domain controller
    Execute tcode STMS
    Goto the menu overvie --> systems (Shift+F6)
    SAP SYStems --> Create --> Virtual system
    Enter the SID and description and then save ur entries.
    Now the new virtual system will be created. Do the above for the others systems in the landscape.
    Again execute STMS and then click SHIFT+F7. You will goto the transport route window. Now you can configure TMS for the systems in the list as usual.
    Hope this helps.
    Regards,
    Varadharajan M

Maybe you are looking for