How can I configure my EDIROL FA-101 in 5.1 Surround in the CONTROL PANEL?

Hi.I own a windows 7 pc with a realtek audio system.
I cannot configure my pc to 5.1 in the CONTROL PANEL.I've even installed the latest driver and 5.1 still doesn't show in the window,only stereo.
I've noticed that recently someone had a similiar problem at http://h30434.www3.hp.com/t5/Desktop-PC-Sound-and-Audio/How-do-I-configure-5-1-surround-on-s3480a/m-... but I dont get a 'SUPPORTED FORMATS' window where you get a DOLBY STEREO option to select.
Please help.
Regards,
Richard Steed

If you use the JDBC driver that's included in the AS/400 Toolbox for Java you don't need to use ODBC at all, you can access the AS/400 directly. See this link:
http://www-1.ibm.com/servers/eserver/iseries/toolbox/

Similar Messages

How can I reference an external help file from context sensitive help at the control level?

My goal is to provide context sensitive help for each control displayed on the front panel using a help file created externally. I know that at the VI level I can specify a Help Path; I want the same behaviour for each control inside a VI. I also know about creating a custom control and specifying the Help Path in there, but it doesn't help in this situation, for I have hundreds of controls in my application and I cannot go back and replace each one with a unique .ctl. If I could override each instance of the custom control with unique path data that would do the trick, but that's not how it works.
Is there a way to add the Help Path information to regualr controls?
-euge
ne

This functionality is not yet built into LabVIEW.
About all you can do is cut and paste the help for each control into the description for the control. It is tedius but a finite task.

How can I reinstall CS/Bridge when they do not appear in NW's Control Panel programmed delete listing?

Bridge in CS6 is returning the error message "Bridge has encountered a problem and cannot read the Cache." Purging install the software. However, for some unexplained reason, neither programme is listed under the programme delete option in W7 control Panel. Is there any other way of safely deleting CS6 and Bridge so that I can reinstall both.

Bridge does not have an uninstaller, because it does not have an installer. Bridge automatically gets installed when installing an Adobe application. Thus the only way to uninstall it is to remove the Adobe applications it is attached to. So you have to remove all CS6 applications to remove Bridge CS6. However, uninstalling Bridge will not purge its cache, this will be left behind. You can purge the cache at launch by holding down the Command+Option+Shift (Mac) or Ctrl+Alt+Shift (Win) while launching (you have to be quick to get the timing right). Choose the Purge Entire Thumbnail Cache option in the Reset Settings dialog that appears.

How can I configure an outgoing server that has a different password than the rest of my email account?

I have a work email account where the password for my incoming server is different than the password for my outgoing server. I cannot find how to change this in the outgoing server settings on thunderbird. Any help would be very appreciated!

Try to add another SMTP server using correct password then tell the mail account to use that smtp server.
* Tools > Account settings > Outgoing Server (SMTP)
* click on 'Add'
* enter a Description so you can easily tell which server this is.
* enter server details.
* userbame = full email address
* password = correct smtp password.
* click on OK
Then tell your mail account to use that smtp server.
* select the mail account name in left column
* bottom right section 'Outgoing server (SMTP)
* click on drop down and select the smtp server you just added.
* click on OK to save changes to Account Settings.
Note: Account Settings can be located via various methods:
Menu Bar
* Tools > Account settings
Mail Toolbar:
* menu icon > Options > Account Settings
FolderPane:
* right click on mail account and select 'Settings'

How can I specify simple math like in a Formula Node but on the front panel?

If the Formula node had a "text" property, that would work for me, because I could limit my inputs and outputs to N floating-point numbers.
LabVIEW once had such a thing but it was in an add-on math library, and I don't remember what it was called.
Solved!
Go to Solution.

Thanks; that led me directly to what I was looking for. A combination of "Parse Formula String.vi" and "Eval Parsed Formula String.vi" works perfectly for me!

HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
"We're sorry, we are unable to continue with your activation at this time."

You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

On the Mac in System Preferences > iCloud
Make sure Mail & Notes is selected.
ON the iPhone tap Settings > iCloud
Make sure Mail is switched on.
And try restarting your Mac and iPhone.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

HT4356 How can I configure the printer to print only grey tones from my iPad 2? Printer=Hp6520

How can I configure printer with iPad to print only grey tones? This works fine from my laptop - not air printing from that one though. I can't find anywhere on the iPad how to do printer settings and this also seems not to be available as an option when doing a printout. In fact, no options seem to be available. Thanks in advance for reacting!
Hermi

There is currently no option for this. You can give Apple feedback here:
http://www.apple.com/feedback/ipad.html

How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
Integrity can be enabled when the system is not running on Storage Spaces. When
integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
fails the read operation by default. If you don’t want the read operation to fail, you
can configure ReFS to continue with the read operation. A related event will be logged
regardless.
So then how do I configure it to do that???
(And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
with integrity streams enabled, via format E: /fs:ReFS /i:enabled
For those who want more details, here's the situation:
I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
And an event ID 133 from ReFSv1 gets logged in the System log:
Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
This is indeed the correct default behaviour.
What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
been able to find anything.

Hi Tommy,
>>How can I configure ReFS to NOT fail read operations when a checksum error is detected
We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
-Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.
Regarding this point, the following article can be referred to as reference.
Set-FileIntegrity
https://technet.microsoft.com/en-us/library/jj218351.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How can I configure a VM to boot from USB key in Virtual PC of Windows 7?

Hi all,
I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
Thanks for any help.
Scorprio
TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

Hi all,
I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
Thanks for any help.
Scorprio
TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin
Virtual PC does not support USB. Windows 7 XP Mode Virtual Machine supports the use of USB devices. Virtual PC and Windows 7 XP Mode VM are not the same thing!

How can i configure advance payment to vendors through cash jounal

how can i configure advance payment to vendors through cash jounal pls its urgent for me kindly help me out

HI,
I think u need not configure anyting new for this, you can use the existing Business Tran. Type K and rename it as Vendor Advance for separate identity. You can do the normal FBCJ posting.
But doing this you will not have separate identity for the Advances paid.
Thanks
VK

How can i configure STMS with out physical systems

Dear Experts ,
please solve my doubts
here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities
and i started some activities also
presently my doubt is in STMS configuration
here i have only one system (DOMINE CONTROLLER) and we need to other systems while configuration but we dont have other systems like quality and production how can i configure that systems in my landscape
this is my first implementation Experience please suggest me with some valuable suggestions
my doubts:
while creating systems we need to take for virtual systems or Extended systems
which transport routes can i prefer for Dev to Qly systemand also Qly to Prd
please reply me
Regards

Hi,
If you have decided the SID's of the QUA and PRD systems then you can configure TMS with the virtual systems. Here are the steps to do so.
Login to the domain controller
Execute tcode STMS
Goto the menu overvie --> systems (Shift+F6)
SAP SYStems --> Create --> Virtual system
Enter the SID and description and then save ur entries.
Now the new virtual system will be created. Do the above for the others systems in the landscape.
Again execute STMS and then click SHIFT+F7. You will goto the transport route window. Now you can configure TMS for the systems in the list as usual.
Hope this helps.
Regards,
Varadharajan M

How can I configure NI PCI 6221 and DAQ SCB-68 for pressure sensors?

Hello
everybody,
I am using the measuring board (NI PCI 6221) and DAQ
SCB-68 for the data acquisition.
With the DAQ-Assistant I created AI for the voltage of
pressure sensors. In a big indicator panel from this DAQ-Assistant I see the
voltage for both sensors in the correct size. But if I set sensors in the
blockdiagramm to control the signals for sensor one I get a wrong voltage size
and for sensor 2 nothing.
How can I configure this data acquisition equipment to
get the correct signals?
Thanks a lot for your help.

I do not know the type of sensor you are using. But pressure transducers may have a very low output voltage(in the mVolt range). They also need an excitation voltage. Here is an introduction. http://focus.ti.com.cn/cn/lit/an/sloa034/sloa034.pdfThen working with pressure sensors I always use 3 stages in the circuit.
1 Instrumentation Amplifier as a preamp
2 filterstage
3 Final amp and output buffer
(you may combine stage 2 and 3)
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

HT3887 how can i configure my wireless keyword so i can use the Function F keys to control volume etc...? I am using 10.5.8 OS

how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS

little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction.

How can I configure my EDIROL FA-101 in 5.1 Surround in the CONTROL PANEL?

Similar Messages

Maybe you are looking for