How can I configure RAC in two local PC

I have two PCs connected with a switch, now can i configure RAC for testing, I'm using Oracle 10G.

>>
I have two PCs connected with a switch, now can i configure RAC for testing, I'm using Oracle 10G.
>>
Although you have two PC, do you have common storage?
I worte a note at my blog about how to diploy RAC on a PC.
http://jaffardba.blogspot.com/2007/01/new-pc.html
Jaffar

Similar Messages

  • How can I configure my new Mac Pro to output the timeline via HDMI

    How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
    If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
    Thanks,
    GEvans
    DarthPro
    3.7 QCIntelXeonE5
    12 GB
    AMD FirePro dual D300 2048MB
    OSX 10.9.2

    If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
    If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
    Any more requires ACTIVE Adapters.
    The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
    StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

  • HT3887 how can i configure my wireless keyword so i can use the Function F keys to control volume etc...? I am using 10.5.8 OS

    how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS

    little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
    Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
    Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction.

  • How can we configure or control records go into single idoc thru BODS?

    Hi,
    Our case is -
    IDOC format has three segment. Each segments has child nodes -
    1. CONTROL SEGMENT - This is required only once per idoc.
    child1
    child2
    2. SEGMENT1 - sinlge source record to be broken into two segments.
    child1
    child2
    3. SEGMENT2 - sinlge source record to be broken into two segments.
    child1
    child2
    we have a single source (lest say having 100 records).
    In the current design which does generates IDOCS but as many as the no of records in source. Currently we use a row generation transform as dummy (with row count as 1) to pass to the IDOC parent nodes's from clause to escape the error - invalid input to the parent nodes.
    Child nodes are either mapped to the source table or are null.
    Question - How can we configure this in a way that we control how many records go into single idoc. Ex - lets say 50 per idoc so only 2 idoc should be created if 100 records are there.

    HI,
    this sounds to me like Data Services. If so I would suggest to post this into the Data Service forum.
    regards
    Ingo HIlgefort

  • How can I configure AAA authentication on ASR9K?

    Hi everyone,
    I´m looking for how can I configure AAA authenticacion on ASR9K.
    I have a TACACS+ server
    Thanks and regards,
    Jaime.

    Hi Jaime,
    here is the basic configuration:
    tacacs-server host port 49
    key 7 !
    aaa group server tacacs+ acs-group
    server
    aaa authentication login acs-auth group acs-group local
    line console
    login authentication acs-auth
    line default
    login authentication acs-auth
    An example:
    RP/0/RSP1/CPU0:router#sh run tacacs-server
    tacacs-server host 1.1.1.1 port 49
    key 7 0822455D0A16544541
    RP/0/RSP1/CPU0:router#sh run aaa group server tacacs+
    aaa group server tacacs+ acs-group
    server 1.1.1.1
    RP/0/RSP1/CPU0:router#sh run aa authentication
    aaa authentication login acs-auth group acs-group local
    RP/0/RSP1/CPU0:router#sh run line default
    line default
    login authentication acs-auth
    exec-timeout 0 0

  • How can I configure a printer which is connected to a Windows PC

    How can I configure a printer which is connected to a Windows PC.
    I have a I-Mac with OSX lion ver 10.7.2 installed.
    The printer is a Canon IP4200.

    The first thing you need to ensure is that the printer is being shared by Windows. Hopefully you know how to do that but if not, reply with the version of Windows you are using.
    With the printer shared by Windows you then add the printer on the iMac by opening Print & Scan and clicking the plus button under the Printers list. With the Add Printer browser displayed you can select the Windows icon. A window appears showing three columns. The first column is for the workgroup name. You may already see a names here such as Workgroup or MSHome. Selecting the workgroup the Windows computer is using will then show the computer name. And selecting the computer name will show the shared printer, although you may need to enter your Windows user name and password to see this printer share. Select this printer share name will then let you select the printer driver to be used on the Mac. Note that you will not be able to use Canon's driver for this, as it is not designed to work with a shared printer from Windows. Instead you will need to download and install Gutenprint. This will provide you with another iP4200 printer in the Print Using menu and this version will let you print via the Windows share.
    If you don't see the workgroups on your local network or the computer name, or something else does not function as described above then please reply with details of what is not happening.

  • How can i configure autologin with network account?

    right now when i go to user preferences for network account, login window and options are non manageable for network users.
    im using network accounts on all public machines and now after reboot they all require manual logon, how can i configure autologin to use network account

    Did you try authenticating with a local admin account to get into the login options from a network user account? Then you might be able to set auto login for that account. I've set network accounts as admin users on particular machines that way.

  • How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

    How can I send email using two different email address that both link back to my one exchange account on my Ipad mini? 
    On my PC I simply have a master return email address and use a POP for the secondary address.  Both are through the one exchange account without a problem.  I need to be able to do the same on my Ipad.

    Ah, I should have made that clear.  My domain didn't come from google.  It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail.  I actually have a bunch of domains (with websites).
    Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such).  Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender.  I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

  • HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

    please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
    "We're sorry, we are unable to continue with your activation at this time."

    You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

  • How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

    I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

    On the Mac in System Preferences > iCloud
    Make sure Mail & Notes is selected.
    ON the iPhone tap Settings > iCloud
    Make sure Mail is switched on.
    And try restarting your Mac and iPhone.

  • How can I transfer songs from two different itunes?

    I want to transfer songs from my brother's itunes library to my shuffle, but when I plug it in his computer, a message saying that his library is not linked to my library (or something to that extent) and whether I would like to replace the songs. If I click yes, all my existing songs are replaced with HIS songs. If I click on NO, the Shuffle icon does not appear at all and I cannot transfer any of his songs to my shuffle. How can I transfer songs from two different computers into my shuffle without replacing any of my existing music?
    Shuffle   Windows XP  
      Windows XP  

    You'll have to setup your iPod to manual instead of automatic update (I'm not sure, though, if it works with the Shuffle as well).
    Alexander.

  • HT4356 How can I configure the printer to print only grey tones from my iPad 2? Printer=Hp6520

    How can I configure printer with iPad to print only grey tones? This works fine from my laptop - not air printing from that one though.  I can't find anywhere on the iPad how to do printer settings and this also seems not to be available as an option when doing a printout.  In fact, no options seem to be available.  Thanks in advance for reacting!
    Hermi

    There is currently no option for this. You can give Apple feedback here:
    http://www.apple.com/feedback/ipad.html

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How can I compare more than two VIs at a same time in labview 2009

    How can I compare more than two VIs at the same time. I am an Lab Engineer I have to check assignments submitted by students and I want to know how many of them are copied from each other. Labview compare VI can only compare two VI at a time while I want to check about 30 VIs at same time.
    Regards,

    I'm not aware of a tool to compare multiple VIs.  If you don't find anything, consider posting this to the LabVIEW Idea Exchange to expose this idea directly to NI R&D.
    Thanks!
    - Greg J

  • My IPhone has a different ICloud Apple ID than my iPad. How can I stream between the two devices

    My iPhone has a different id than my iPad. How can I stream between the two devices

    I should say that you can add the other account to each device as a seconday account by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud and signing in with the ID the other device is using.  This would allow you to see mail, contacts, calendars, reminders and notes from the other account alongside the same data from the primary account on each device.

Maybe you are looking for