How can I configure SAP Library

Dear Experts,
I would like to configure SAP Library OFFLINE on my server can somebody guide me step-by-step.
Regards,
Prashant Chauhan

> Hi Reiner,
> Thank you very much for response, this is helpful
> information.
If you consider an answer as helpfull, please mark it with the button on the left side :-).
> My options are pretty much limited,
> I can't use NTLM since, AIX will not accept trust
> -- NTLM Auth will not work with AIX
> -- Kerberos auth have to have third party tool like
> CyberSafe for SNC trust relationship.
As I wrote, you can use any SNC provider. Especially Secude would be interesting, as it is available on all platforms.
> I planning to try using SSO as mentioned in "Enabling
> Single Sign-On for ASP.NET Applications in Enterprise
> Portal 6"
> Is this approach works with EP 5.0?
This is a completely different approach: In the stuff I was writing to you before I was assuming that IIS would do the authentication. The other approach is that SAP Portal does it. This also works - EP 5.0 should be fine - but it works completely different. E.g. you doesn't need a trusted connection for SSO with MYSAPSSO2 ticket.
> If any one has "sapsecu.dll" please send me at
> [email protected] with same size as stated in
> this document.
This DLL is not allowed to be exported into some countries because it contains strong cryptography. You usually get it via your local SAP subsiduary.
> My SSO ticket did not get created after following
> steps in document, I am suspecting either sapsecu.dll
> or veryfy.pse is wrong?
Did you find a MYSAPSSO2 cookie in the request?

Similar Messages

How can we configure the width of the table in SAP DB

Hello sirs,
How can we configure the width of the table in SAP DB? (<b>i.e to specify the total width of the sum of all columns</b>). I need to change the default value of table width for adding fields with biggger sizes...
With best regards,
Sudheesh....

Hi,
The restrictions for using SAPDB are available at the following link http://dev.mysql.com/doc/maxdb/en/f6/069940ccd42a54e10000000a1550b0/content.htm
The 'internal length of the table' is 8088 bytes, which intern maps to the column width attribute.
Can we change the column width?
The answer is 'NO'.
check the general Column width error (-1115) at link below where it is specified that the column width can be altered http://dev.mysql.com/doc/maxdb/en/bb/57f18204fd11d2a96c00a0c9449261/content.htm
Refer link below for more details on the width of each column (based on the datatype associated with the column). http://orgs.man.ac.uk/documentation/mysql/manual_Column_types.html
So we will have to judiciously look into the boundary values for each column and set the right length because if the column is char(200) and it holds a null value then length allocated is 200 bytes.
The restriction cannot be broken.
Regards,
S.Divakar

How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
Integrity can be enabled when the system is not running on Storage Spaces. When
integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
fails the read operation by default. If you don’t want the read operation to fail, you
can configure ReFS to continue with the read operation. A related event will be logged
regardless.
So then how do I configure it to do that???
(And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
with integrity streams enabled, via format E: /fs:ReFS /i:enabled
For those who want more details, here's the situation:
I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
And an event ID 133 from ReFSv1 gets logged in the System log:
Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
This is indeed the correct default behaviour.
What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
been able to find anything.

Hi Tommy,
>>How can I configure ReFS to NOT fail read operations when a checksum error is detected
We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
-Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.
Regarding this point, the following article can be referred to as reference.
Set-FileIntegrity
https://technet.microsoft.com/en-us/library/jj218351.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How can i configure STMS with out physical systems

Dear Experts ,
please solve my doubts
here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities
and i started some activities also
presently my doubt is in STMS configuration
here i have only one system (DOMINE CONTROLLER) and we need to other systems while configuration but we dont have other systems like quality and production how can i configure that systems in my landscape
this is my first implementation Experience please suggest me with some valuable suggestions
my doubts:
while creating systems we need to take for virtual systems or Extended systems
which transport routes can i prefer for Dev to Qly systemand also Qly to Prd
please reply me
Regards

Hi,
If you have decided the SID's of the QUA and PRD systems then you can configure TMS with the virtual systems. Here are the steps to do so.
Login to the domain controller
Execute tcode STMS
Goto the menu overvie --> systems (Shift+F6)
SAP SYStems --> Create --> Virtual system
Enter the SID and description and then save ur entries.
Now the new virtual system will be created. Do the above for the others systems in the landscape.
Again execute STMS and then click SHIFT+F7. You will goto the transport route window. Now you can configure TMS for the systems in the list as usual.
Hope this helps.
Regards,
Varadharajan M

How can I configure ang use JNDI datasource on Tomcat 4.0.x ?

How can I configure ang use JNDI datasource on Tomcat 4.0.x ?
Please help me , Thanks !

Hello ,
You need to go through the JNDI tutorial which you can access at the sun's site. It will explain all the things you need.
By the way all you want to use JNDI datasource is JNDI class library and some naming or directory service provider, which also you can download from sun.
Good Luck.

Want to configure SAP Library

Hi Experts,
I want to configure SAP Library I had downloaded Library files too, one is of CHM and other one is of HTML. I wanted this file to be available in my SAP Library OFFLINE on server insted of online, so the persone who is not using internet in my LAN can also be able to access those files. So please help me to configure this CHM files.
Regards,
Prashant Chauhan

hi prashanth,
1. Create folder for the installation, e.g. G:\documentation.
2. Start sapinst.exe from the installation master DVD or from ur dump.
3. In SAPinst you have to give the language folder on the Documentation DVD,
e.g. G:\ADM110_62A\Installation Media (DVDs)\SAP ECC 6.04\SAP ECC60
SP14 Documentation\HTMLHELP\EN.
4. Wait some minutes until the installation has finished and close SAPinst.
5. Now you can open the SAP Library by double clicking on <local
folder>\HTMLHELP\<Language>\00000001.chm.
this might help you
thanks and regards,
santosh.

Configure sap library-online documentation in EHP4 system

Hi,
How to configure SAP Library - Online Documentation on (EHP4 systesm) OS level.
Thanku

Via SR13 as in any other version... read the documentation.
Regards
Juan

How can i find SAP Gui logon pad version

how can i find SAP Gui logon pad version ?

Hi,
That's easy. At the top of the logon, you see a title bar with a general version indication. At the most left of it, you'll see an icon. Click on that and choose about SAP logon and you'll get detailed info.
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
"We're sorry, we are unable to continue with your activation at this time."

You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

You may very well have damaged your library - or even your system by not having adaquate storage available
And never select all of the pitcture and move them - that will destroy your library - the iPhotolibrary is a SQLite database and must always be kept intact as a single entity -
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

My ITunes library was wiped from Itunes app on my PC, but it is still in a folder on my hard drive. How can I reinstall my library back to the Itunes app? My library is available in Itunes on my Ipad but I can't find an option to synch to my PC?

My ITunes library was wiped from the Itunes app on my PC, but I think the files are still in a folder on my hard drive. How can I reinstall my library back to the Itunes app? My library is available in Itunes on my Ipad but I also can't find an option to synch to my PC?

How to recreate iTunes Library
No content shows up in iTunes after updating

How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

On the Mac in System Preferences > iCloud
Make sure Mail & Notes is selected.
ON the iPhone tap Settings > iCloud
Make sure Mail is switched on.
And try restarting your Mac and iPhone.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

How can i split a library into two.. i no longer want to sync all of my wifes songs and apps.. i have a separate account, but want to take my music and apps from hers so i now have my own and she has her own.. so that syncing is easier

how can i split a library.. my wife and i used to share it, but now we have our own id's.. i want my music and apps off of hers so that i can sync my phone and only my music and apps will "come over"

how do i share then? can she upload music if we share it somehow?
If so how??
i am also having the same problems now with IPhoto, she has all of her/our pics in my IPhoto library.
I have told her that now i have bought her the Ipad she would have to log into her user, the only thing is there is no music in her itunes account nor photos in her I Photo library, i have spent all day trying to find a way to "share" but no luck,
Please help i`m going mad!
Surely we could just share these...?
I need step by step instructions please someone send me a link on "how to share pics and music!"

I have the computer with my itunes library on it but no longer have access to the email account the library was set up with. How can I transfer the library to a new appleid/email?

I have the computer that holds my itunes library. However, I no longer have access to the email account (and therefore apple account) it was set up with so can't sync/update etc. How can I transfer the library to my new apple id? Any help gratefully received as searched the internet but can't find the answer!
Have ipod touch 4th gen, ipod touch 5th gen and ipod nano 7th gen all to sync to library.

Hi Stillme,
You cannot transfer purchases from one Apple ID to another. You need to go into the old Apple ID and change it to the new email address instead of using a new Apple ID altogether.
Apple - My Apple ID
If you can't remember the password to the old ID, then click on Reset your Password, and answer the Security Questions. If you can't remember the Security Questions, contact iTunes Support and have them reset:
APPLE ID SECURITY CONTACT NUMBERS
Once you get into your old account, Edit the Apple ID to your new email address. Before you will be able to do that you are going to have to change the email address on the new Apple ID to something else.
Cheers,
GB

How can I configure SAP Library

Similar Messages

Maybe you are looking for