How can i configure SIP call using uc320 in india

Hi,
I have one uc 320w box. now wannt to call my itally office in cost effective way.
how can use it?
i heaard about SIP calling. is it avalaible in india? or suggest me the possiblw ways.
Thanks
Sujish Sudhakar

Hi Sudhakaran,
I think this article about SIP Configuration would help you as a step-by-step process.
Generic SIP Configuration on UC320W

Similar Messages

How can i configure an odbc using a database from sql to my excel

Hi, i hope you can help me
I have an excel sheet in wich i'm working, but i need to import data from a database used SQL, but i need the ODBC connection,... I try to used the administrator ODBC, but it has no driver for me to connect it to the SQL database, ... who knows wich tool can i use?
best regards,
Pamela

As far as I know -you still can't do that with the mail app on a device. You can select each contact by tapping the blue + sign to open the contacts app and you have to add them one at a time.
These are third party apps that will let you do this - Group Email ... And there are others in the app store.

How can i configure autologin with network account?

right now when i go to user preferences for network account, login window and options are non manageable for network users.
im using network accounts on all public machines and now after reboot they all require manual logon, how can i configure autologin to use network account

Did you try authenticating with a local admin account to get into the login options from a network user account? Then you might be able to set auto login for that account. I've set network accounts as admin users on particular machines that way.

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

HT3887 how can i configure my wireless keyword so i can use the Function F keys to control volume etc...? I am using 10.5.8 OS

how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS

little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction.

How can I configuration MBean in weblogic server using the console ?

How can I configuration MBean in weblogic server using the console ?
I hear people talking about mbeans in weblogic server I have look in the console I can not find where , or how to do it.
can some body explain that or a link that explain it, how to do it on the console ?

Hi,
Registering Custom MBeans from Admin Console is not yet possible. But yes there are ways to Configure and Utilize Custom MBeans ...
http://weblogic-wonders.com/weblogic/2010/02/16/registering-and-invoking-custommbeans/
Thanks
Jay SenSharma

How can I configure ang use JNDI datasource on Tomcat 4.0.x ?

How can I configure ang use JNDI datasource on Tomcat 4.0.x ?
Please help me , Thanks !

Hello ,
You need to go through the JNDI tutorial which you can access at the sun's site. It will explain all the things you need.
By the way all you want to use JNDI datasource is JNDI class library and some naming or directory service provider, which also you can download from sun.
Good Luck.

If someones is using my account/apple id can they receive calls or messages too?? and how can i notice if someones using my apple id??

if someones is using my account/apple id can they receive calls or messages too?? and how can i notice if someones using my apple id??

You cannot make your @icloud.com address the login address for the ID. However you can change your ID, currently a Gmail one, to any other functioning non-Apple email address. The Gmail address would then no longer access your account, and so even if someone were to obtain posession of it (is that even possible) it wouldn't allow them to get into your account.
If you want to change your ID to another email address please follow the procedure outlined below, particularly noting the first step.
Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
Create a new email address, for example at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
Enter your new address and click 'Save changes'.
Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

How can i reject incoming calls in lock screen , without using ON/OFF key ??? (in iOS 7.0.2)

how can i reject incoming calls in lock screen , without using ON/OFF key ??? (in iOS 7.0.2)

You can't. Either tap the Sleep/Wake button or just let the call to continue to ring.

How can i configure DAQ card other then NI using MAX

Hi,
I am using Advantech DAQ pci1711, can i configure this card using NI MAX. I am getting problem with its port specification while writing VI's because could get channel port addresses.

MAX can only configure cards that use the Traditional NI DAQ and DAQmx. Advantech uses their own drivers. Does Advantech have a utility for setting up their PCI cards?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How Can I make redirect caller from agent to any branch IVR?

I have IPCC Enterprise Edition (ICM 5.0, IVR 3.1)
How can I make redirect caller from agent to chosen branch IVR, and send with call any variable to IVR (e.g. account number).
Regards
Krzysztof

I would suggest that post-routing should not be used. The way to go is to use translation routing applications. Although post-routing is easy to set up, almost all deployments require translation routing. I can't think of anything good to say about post routing, other than it's trivial to configure.
You want the main route point to be on the CM_PIM.RC for a number of reasons. You can check to see which of your IVRs are on line, and/or to do load balancing. If calls don't need to go to the IVR if agents are ready, you can have an LAA Select node immediately, and then translation route. Even if you just have one IVR, translation routing will enable you to do RONA more easily.
You need to bite the bullet and learn translation routing. If you do it that way, peripheral variables attached to the call remain unaffected whether the call is under the control of the CM_PIM.RC or the IVR_PIM.RC. This is exactly what you want.
There is no need, in my opinion, to go to an external database. In your IVR, decisions made by the caller (e.g. which "skill" they want) set peripheral variables. When the call comes out of this script you check the peripheral variable, and depending on the value do a queue to the appropriate skill group and run external script (BasicQ.aef).
Separate the intelligence gathering IVR script from the Queuing script. Allow ICM to make the routing decisions.

How can I make a call from iPad

How can I make a call from IPad

Oh, you have to get the iPhone app.
Seriously, though .... you are aware that it's not a telephone, right? Any calls you make will be using VOIP and any of the apps and/or services (Skype, Google Talk, etc., etc.) which support that. Some of those are US-only, all have various restrictions and cost structures.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
Integrity can be enabled when the system is not running on Storage Spaces. When
integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
fails the read operation by default. If you don’t want the read operation to fail, you
can configure ReFS to continue with the read operation. A related event will be logged
regardless.
So then how do I configure it to do that???
(And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
with integrity streams enabled, via format E: /fs:ReFS /i:enabled
For those who want more details, here's the situation:
I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
And an event ID 133 from ReFSv1 gets logged in the System log:
Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
This is indeed the correct default behaviour.
What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
been able to find anything.

Hi Tommy,
>>How can I configure ReFS to NOT fail read operations when a checksum error is detected
We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
-Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.
Regarding this point, the following article can be referred to as reference.
Set-FileIntegrity
https://technet.microsoft.com/en-us/library/jj218351.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How can I configure a VM to boot from USB key in Virtual PC of Windows 7?

Hi all,
I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
Thanks for any help.
Scorprio
TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

Hi all,
I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
Thanks for any help.
Scorprio
TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin
Virtual PC does not support USB. Windows 7 XP Mode Virtual Machine supports the use of USB devices. Virtual PC and Windows 7 XP Mode VM are not the same thing!

How can i configure SIP call using uc320 in india

Similar Messages

Maybe you are looking for