How can I configure two rp-addresses?

I am running IP PIM Sparce-Mode on all of my routers. I have a hub and spoke frame relay voice network. The hub is my rp for all of the spokes. One of the spokes will need to terminate two other spokes off of it. My question is how do I configure this router to have two rp, one of for one of it voice group and the other for the other voice group that will terminate into it?

You will need to use ACLs for
each multicast group, with the
"ip pim rp-address "
command.
You can find an example plus config
at this URL :
http://www.cisco.com/warp/customer/105/48.html#A3

Similar Messages

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • The car gauge app available from the itunes store utilizes an OBDII Bluetooth adapter, but I can't configure the Bluetooth address. How can I use this app I just installed, it has to have the Bluetooth address configured.

    I saw an advertisement in a car magazine for an app that would provide gauge read outs available for download from the app store. So I went to the app store, found the app, downloaded and installed it. I then purchased the Bluetooth OBD hardware adapter required to transmit the data from the car to the phone. The adapter has to be configured for the app to communicate with it. This is an apple approved app. But everything I've read says that apple will not allow iPhone owners to make any adjustments to their Bluetooth addresses. And that iPhone only provides Bluetooth connectivity to basic head sets speakers and audio formats through the car stereos ( but no audio streaming). 
    Bottom line, apple approved app and hardware that can't be configured unless I perform a jailbreak? I don't want to JB the phone but it seems that apple has left me with no other options. I've already invested time and money on this software and hardware. Their must be a legitimate way to use this apple approved software. Does anyone know how to adjust/configure bluetooth settings/addresses?

    Generally, if you have to enter a code for bluetooth, your iPhone will ask you to enter a 4 digit code when pairing.  Check the instructions for the device you are trying to pair with your iPhone.  The instructions should give you the code in the pairing instructions, if a code is required.

  • How can I change my email address in iMessages so that I can receive messages. My apple seems to have two different email identities and I cannot figure out how to change the wrong one.

    My email address in the imessage part of my ipad is incorrect. How can I change the email address to conform with the email address on the rest of my apple products? I can get messages on my iphone, mac but not on my ipad because of the incorrect address.

    Go on to settings> Messages > send and receive
    this should give you the opportunity to edit email adressed
    Hope it helps.

  • How can I get the MAC address of my Apple TV?

    How can I get the MAC address of my Apple TV? I currently do not have an HDMI device to connect it to, and the MAC is not listed on the box or the Apple TV itself.
    (to answer the obvious, I am trying to pair it with an iPad, and I need to register the Apple TV for the network so the two can see each other)

    As long as I know java doesn't have support to work on link-layer, only internet and transport layers. You may write simple native code. On windows, IP Helper functions, like SendARP allow you to pass an IP address and get the hardware address. You store the hardware address on your database/file and later, when that machine is off, you send a frame to the address you stored previous.
    [http://msdn.microsoft.com/en-us/library/aa366071(VS.85).aspx]
    I haven't seen it on Linux, but if you need help let me know I'll check the Linux API's too.

  • How can I configure my new Mac Pro to output the timeline via HDMI

    How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
    If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
    Thanks,
    GEvans
    DarthPro
    3.7 QCIntelXeonE5
    12 GB
    AMD FirePro dual D300 2048MB
    OSX 10.9.2

    If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
    If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
    Any more requires ACTIVE Adapters.
    The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
    StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

  • I changed my email address on one of my old APPLE accounts and want to merge my accounts together, how can I change my email address on my old Apple account?

    I changed my email address on one of my old APPLE accounts and want to merge my accounts together so I can get all my songs!!  My computer crashed and I'm tryng to change everything over to my mac via my ipod classic and just Transfer old files.  It's ejecting my disc (ipod) so I figured I could just change my old Apple ID to be one with my new one.
    how can I change my email address on my old Apple account?

    There is no way to merge two Apple IDs as all purchases made with each account are always tied to those accounts.
    All you can do to each account is change the email address for each one but they can't have the same email address.

  • HT3887 how can i configure my wireless keyword so i can use the Function F keys to control volume etc...? I am using 10.5.8 OS

    how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS

    little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
    Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
    Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction.

  • How can I set two different emails in only one contact form?

    How can I set two different emails in only one contact form?

    To enter multiple email address with the Contact Form Widgets:
    Click the Options icon for the selected widget, then
    In the Email to box, enter multiple emails by delimiting them with a semi-colon. For example: [email protected];[email protected]
    Cari

  • How can we configure or control records go into single idoc thru BODS?

    Hi,
    Our case is -
    IDOC format has three segment. Each segments has child nodes -
    1. CONTROL SEGMENT - This is required only once per idoc.
    child1
    child2
    2. SEGMENT1 - sinlge source record to be broken into two segments.
    child1
    child2
    3. SEGMENT2 - sinlge source record to be broken into two segments.
    child1
    child2
    we have a single source (lest say having 100 records).
    In the current design which does generates IDOCS but as many as the no of records in source. Currently we use a row generation transform as dummy (with row count as 1) to pass to the IDOC parent nodes's from clause to escape the error - invalid input to the parent nodes.
    Child nodes are either mapped to the source table or are null.
    Question - How can we configure this in a way that we control how many records go into single idoc. Ex - lets say 50 per idoc so only 2 idoc should be created if 100 records are there.

    HI,
    this sounds to me like Data Services. If so I would suggest to post this into the Data Service forum.
    regards
    Ingo HIlgefort

  • How can I get the MAC address

    My machine has two NIC's. I need to add another network interface, however when I do so it gets assigned to the same MAC address as the interface in use. Why is that and how can I determine the MAC address of the other card to be able to assign it to the new interface?
    thanks

    If necessary, change the value of local-mac-address? as follows:
    eeprom local-mac-address?=true
    When you reboot the system, the interfaces with factory-installed MAC addresses now use these factory settings, rather than the system-wide MAC address. Interfaces without factory-set MAC addresses continue to use the system-wide MAC address.
    [http://docs.sun.com/app/docs/doc/816-4554/eyprp?a=view]

  • How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address

    How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address

    Hello,
    Try Mail>Preferences>Accounts icon>Account Information tab>Click on the Outgoing SMTP server drop down, choose edit Server list, highlight the old one & click Remove.
    (Such convolution is worthy of Windows® in my estimation)

  • HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

    please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
    "We're sorry, we are unable to continue with your activation at this time."

    You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

  • How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

    I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

    On the Mac in System Preferences > iCloud
    Make sure Mail & Notes is selected.
    ON the iPhone tap Settings > iCloud
    Make sure Mail is switched on.
    And try restarting your Mac and iPhone.

  • How can I have two itunes accounts on one computer?

    How can I have two itunes accounts on one computer?

    Not sure what you mean.
    An account is a user name and password.
    Sign into whichever account you want to use for purchasing.
    Authorize the computer for both account to listen to the content.

Maybe you are looking for