How can I confirm that fix for JDK bug will be in certain JDK update?
Currently I am struggling with one of JDK bugs (link to issue). We would need it fixed in one of the JDK7 updates.
According to Oracle's bug tracker this bug has been fixed in JDK 8 and backported to JDK7 for version: JDK 7u66 (link to issue). Last released JDK is 7u60.
According to Oracle's page the next release of JDK 7 is planned for 15th of July (see page) but it states that it is going to be " Critical Patch Update" only.
Can we be certain that with the update on 15th of July we will get our bug fixed based on info from Oracle's bugtracker? Will this issue be included despite the fact that it will be "Critical Path Update"?
Confirm it?
Only way to do that is to wait for the patch and then test it. Nothing else is valid.
If you have some sort of contract with Oracle then you have a support line and you can ask them. But even if they say yes it doesn't mean it will be there.
You could figure out the fix yourself and apply it to the VM using a command line option.
Similar Messages
-
So my Ipod Touch 4g screen cracked excedpt for the touch screen part how can i get that fixed?
So my Ipod Touch 4g screen cracked excedpt for the touch screen part how can i get that fixed?
Apple will exchange you iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
Sometime if you make an appointment at he Genius Bar of an Apple store they will replace it at not cost.
There are alos third-party places like:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
How can I confirm my Registration for iPod Touch ?
How can I confirm my registration for iPod Touch ?
What do you mean by confirm?
Mayed gong here may do it:
My Support Profile*
Or entering your SN here:
Apple - Support - Check Your Service and Support Coverage -
MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
How can i confirm that i have the grid control ?
Hi,
I have oracle 10g database , we have dbconsole. But i don't know wherther we have the grid control or not ??? how can i check that ??
And one more thing , i have the oracle 817 databases , in need to register that database into the GRID . Can any one send me the proper doc. for 817 to install into grid control db.
$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://prodgv1:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated inI have oracle 10g database , we have dbconsole. But i
don't know wherther we have the grid control or not
??? how can i check that ?? What are you looking for exactly? What does "do we have the grid control" mean?
Did you download and install this?
A "default" install comes with three Oracle homes, with directories db10g, oms10g and agent10g in the 'basedir'. Kinda hard to miss...
With proper environment setup, you could try
$ emctl status oms
To manage Targets (as called in EM terms), you would install a Management Agent on each host to start monitoring hosts, listeners, databases, application servers, oc4j instances, and other types of targets. You "add hosts" via addition of agents.
And one more thing , i have the oracle 817 databases
, in need to register that database into the GRID .
Can any one send me the proper doc. for 817 to
install into grid control db.No need to send anything, the documentation is available here on OTN (look in the top menu "shortcuts", Documentation -> Enterprise Manager).
There are several options (version dependent of course) available for deploying agents. But you need a OMS + Repository first.
Further discussion probably belongs in the dedicated Enterprise Manager.
Message was edited by:
orafad -
How can I confirm that my extensions are compatible with FF ver 4 and ver 5 before I upgrade?
When I have upgraded in the past I have been affected by extensions that do not work in the new version. How can I determine if my extensions are compatible with new versions. I have looked at knowledge base and other help but I can find nothing.
Thanks, Forewarned is forearmed.
Checking my incompatible extensions now seems to be less than when I just casually reviewed the list. Perhaps authors are still updating their products.
Most of my incompatible extensions are not critical. Perhaps the most important is AARDVARK which I use extensive prior to printing bank statements.
My incompatible extensions are:
Aardvark
Colourful Tabs
Image ToolBar
MS .NET Framework Assistant
Quick Page Zoom
Rewind/Fastforward Buttons
Windows Update -
I got my macbook from my dad a while back, and I tried to make me the administrator. But in doing so, I somehow activated a root user, and now my account (which is also the only account now) is a standard one, so I can not download apps, etc. How can I fix this without losing my files?
Option 1
If you've enabled root logins, log in as root and promote the other user to an admin.
Option 2
Boot into Recovery (command-R at startup) and restore your system from the last Time Machine snapshot taken before the damage was done, if you know when that was. Afterwards you can restore any data that has changed since then from a later snapshot. If you’re an advanced user familiar with the shell, there may be a quicker fix, but I prefer not to get into that.
Option 3
Back up all data, then boot in single-user mode (command-S at startup.) When the text stops scrolling, follow the prompts to make the boot volume writable. Then enter the following command:
ls /var/db/.AppleSetupDone
You should get the following line of output below what you entered:
/var/db/.AppleSetupDone
If you do, then very carefully enter the following command:
rm !$
Now you should get the following output:
rm /var/db/.AppleSetupDone
Then enter
reboot
The system will boot into the Setup Assistant, as if you were setting it up for the first time. Skip the prompt to transfer information. Create a user with the same name as the old admin user. Log in and test. You may need to recreate your other user accounts, if any. The files won't be deleted. -
How can I confirm that I installed BO XI R2 SP3 and Fix Pack 3.5 correctly?
I installed both SP3 (Client Install) and Fix Pack 3.5 (Client Install) on my workstation. The Installation guide says it should appear in Add/Remove Programs, but I'm not seeing either entry. A log file was created for each install, is there anything within the logs that may say that the install was successful?
Under the Add/Remove programs section in the Control Panel. Select the Business Objects Application and there is a link that reads "Click here for support information"
The opened display box will display a Version such as 11.5.xxxxxx
Reply back w/ the version. SP# and 3.5 fix pack will be something like 11.5.9.1176 -
I have bad service inside my house, how can I get that fixed with Verizon
I can practically see two Cell Towers within 1/2 mile of my house but when I get a phone call or make a call out, the service is fine for 5 seconds and then it really breaks up? I live in the SW with Stucco and Metal Mesh but have owned homes before like this and never had this issue. Neighbors have Verizon and they don't have any issues: I have two computers and WiFi network but so do neighbors, beyond that I don't know. Does Verizon offer a Wifi connect for home use like Sprint/AT&T?
No, they do not, however they do sell a network extender for $250 which you can connect to your broadband ISP which would act as a Verizon tower inside of your home.
-
I bought 2 songs for my friend as suprise gift. So I don't want to call her to find out whether she has received the gift and already downloaded it. Can anybody help?
Hello imexsean,
You can step through the process of changing the email address that the gift was sent to. If the email address can be changed, then the gift has not been redeemed.
You can edit or change the recipient email address for your iTunes Gift as long as your recipient hasn't redeemed your gift. To edit or change the Gift Recipient email address, tap the recipient email address on the Gift Details screen from your iOS device.
Resend iTunes Gifts
http://support.apple.com/kb/HT1541
Cheers,
Allen -
How can I confirm that my app gift was downloaded?
I purchased an app for a member of my family but I didnt receive a confirmation email. Will I get some notification when they download the app? Is there some way I can tell if they have downloaded and installed the app?
By checking the signal levels in the "extended" area of wi fi coverage, utilizing a mobile or portable device such as an ipad/ipod, or a laptop. You should notice improved area coverage if your extended Express is doing its job.
-
How can we confirm that an EAM Asset Activity is on PM schedule?
Hi
If there is any way to see in application, that an (Enterprise Asset Management) asset activity is on Preventive Maintenance Schedule or not?
Or if there is any flag in any table from where we will get to know that an asset activity is on PM Schedule or not ?
Please suggest.
Thanks,
Chayanika.You can go to the PM schedule definition screen and enter the activity name to find out if there any schedules that use it.
On a table level, there is no flag as such but you can do the following to find out if there are any pm's that use the activity.
select count(1) from eam_pm_schedulings_v v
where asset_activity_id = (select inventory_item_id from mtl_system_items_b where organization_id =&orgid
and segment1 ='&Activityname)
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026 -
How can I confirm my netwrok for acces OC?
Hi,
I can login OC with VPN connect. but as the bussiness require, we build a direct connect between two city. as the sercurity reson, we just config port 443 and 5061 for OC. but we get a result about Cer error.
is there any more port is require for idf? such as DNS port?
as we can login with VPN, I think the Cer is fine. but some reason make it fale to pass Auth.
My mail: xxxxxxxxxxxxxxMight try them over here.
Microsoft OC Setup & Deployment forum
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.
thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.
-
Can someone confirm that this is a bug?
Hey guys,
I recently used the built-in DeNoiser audio plugin for a project I am editing. Almost immediately after applying the effect, Premiere CS5 crashed. Now that I think back, this has happened one other time after the effect was applied. To speak of, these are the only two crashes I've had with PP CS5. DeNoiser is a useful effect, and although I don't use it all the time, it definitely comes in handy in certain situations.
Has anyone else experienced simalar behavior?Hey Todd.
Yes, I'm using the latest version of Premiere (5.0.3), and am using it on a Windows 7 x64 system. To speak of, this didn't happen with CS4 on the same system, although I cannot be certain of this because CS4 crashed on me quite frequently regardless of whither this effect was applied.
It doesn't instantly crash after the effect is applied. The crash occurs at seemingly random times, usually while playing the clip the effect was applied to.
The following is a record of the crash in the event viewer:
"Problem signature:
P1: Adobe Premiere Pro.exe
P2: 5.0.2.0
P3: 4c731297
P4: DeNoiser2.dll
P5: 2.0.0.1
P6: 4b040844
P7: c0000005
P8: 000000000006a8b1
P9:
P10:
Attached files:
C:\Users\Mitch\AppData\Local\Temp\WERC047.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Mitch\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Adobe Premiere P_9ab33fbef7f5bcf1d6f55badda31669094f7ef2b_0f77d915
Analysis symbol:
Rechecking for solution: 0
Report Id: c2baa684-ead1-11df-94f2-001ec94ef47f
Report Status: 0"
I'll have to do some experimenting and try to gather more information for you to go on.
Maybe you are looking for
-
My feeble attempt at a MB comparison - Asus A8N-E vs MSI Neo4 Platinum
Hi all, I just thought I'd share a post I just finished submitting at the Asus forum. Here's my experience, in a nutshell, with both the Asus A8N-E and the K8N Neo4 Platinum: I've decided to give up on the A8N-E and Asus (for now) in favor of the MS
-
Hard drive is full, how to make iTunes span multiple hard drives?
My mp3 drive is full. How do I tell iTunes to use multiple hard drives? It seems to only want to deal with one.
-
Better video quality on my old G3 than my new iMac?!?!
How is this possible??? The visual quality of my new 17 inch 2 duo iMac 1.83 is horrendous. The screen detail and colors look like they're stuck in thousands instead of millions. Even though the resolution says otherwise (1440x900 millions). As a tes
-
I PURCHASED RINGTONES ON MY IPHONE 4S BEFORE I EVEN PLUGGED INTO ITUNES THEN I PLUGGED IT IN FOR THE FIRST TIME AND RINGTONES HAVE DISSAPEARED FROM PHONE HOW DO I GET THEM BACK?
-
Oracle equivalent of SQL - URGENT
UPDATE tblA A INNER JOIN tblB B ON (A.TRAN_REF_NO = B.TRAN_REF_NO) AND (A.LINE_TYPE = B.LINE_TYPE) SET A.FLAG = 'U' WHERE B.UPDT_ACT_CD='I'. This SQL works fine in SQL Server. I need an Oracle equivalent of the above SQL that will work with 9i. It's