How can i connect 24VDC to digital input (usb 6008)

hello,
how can i connect 24VDC to digital input (usb 6008), is it possible with some optocoupler?
thanks

The 6008 is a static DIO, so speed shouldn't be an issue.  Therefore an optocoupler should work.  Just make sure you get one the meets your specs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

    Dear Community,
    how can I connect SCSI tape recorder via USB to iMac ?
    Is there any adapter/converter on the market now ?
    Cheers, Marek

    Thanks Jan.
    Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
    I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
    Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
    Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
    My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
    Best regards,
    Marek

  • How can i connect the printer without a usb?

    I have recently changed my internet provider and have tried to reinstall the printer software but it wont find the printer and says that i need a usb cable which i dont have. Can i connect the printer without one? Its a photosmart all-in-one c4380 printer.

    Have no idea, no model number of printer.   You can always buy a USB Printer cable. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    That won't work with the iPad, unless maybe there's a "control monitor" app somewhere.

  • How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    Composite is analogue with one connector. That is why it is called composite
    Component is analogue with three connections. I think one for each color
    Here is the one for component. I misread composite for component
    http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

  • How can I connect my Ipad Air to my PC to see the Ipad screen on the PC? I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. Thanks

    How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
    I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
    Thanks for any help! Regards

    Hi Rob - thanks so much for your help!  Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
    Do you use them on the Ipad or on the PC?
    Do I need a cable too and which one?
    Sorry... I am not very technical as you can see, thanks for your help.
    Regards

  • My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

    My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

    Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
    Example
    http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1

  • How can I route my audio interface inputs to Logic Express inputs?

    Hello,
    Logic Express can 12 inputs to record audio on.... fair enough.
    My MOTU Traveler, together with ADAT connected Mackie Onyx 800F have 16 inputs...
    How can I use the first 4 inputs (XLR) together with the last 8 input (ADAT)
    Logic only seems to count from 1 to 12!
    (After reading the manual, It seemed to be solved by making new Audio Input Objects in the Environment, but unfortunately these objects where removed from Logic Express)
    Does anybody have the solution?
    Thanks a lot.
    Greetings,
    Mark

    Hi Michael, thanks a lot!
    Unfortunately it didn't solve my problem yet. I tried
    the audio/midi utility and found that the inputs
    can't be turned off. Is there not a environment patch
    possible, that I can load that puts the inputs in the
    right order? I hope so!
    Greetz,
    Mark
    The Environment doesn't route audio; it routes MIDI. There are audio objects IN the Environment, but you can't shuttle audio around like that.
    You have to remember that LE is an entry-level piece of software. You might think Garageband is entry level, and I think it should be, but in reality, LE is VERY crippled. Don't get me wrong, I'm not ragging on Logic as a program; I think Logic is great. But Apple has made some poor choices with respect to the features of LP that get crippled in LE.
    Sorry to digress from your original topic, but I think this is a bigger issue. The difference in price between LP and LE is enormous. That difference should be due to the fact that LP has plugs and effects (and other fairly esoteric features, like surround mixing, that most people don't need), and that justifies the price difference. Remember, when Emagic sold Logic (pre-Logic Pro 6), those effects and instruments cost a LOT more than the difference between LP and LE. LP is really a steal for what you get. LE is a poor substitute.
    Seriously, LE is a lot less than just a lite version of LP; it's crippled by things like the 12 input/output thing (what is the point?), the useless Auxes, and numerous other little things that keep it from really competing with other 'lite' sequencers like Cubase SL or Audiodesk.
    Anyway, I think the answer to your question is, if you need to record more than 12 simultaneous tracks, or you need flexibility in accessing your hardware's inputs and outputs, you need a better program.
    Fortunately, the upgrade cost to LP isn't that much, nor is the crossgrade to Digital Performer...

  • How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

    How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
    This does not have an HDMI port but does have:-
    1) S-Video I/P,
    2) Video I/P,
    3) Audio Input (Left & Right)
    4) Audio In jack (for VGA and DVI source)
    5) DVI input
    6) VGA input

    Welcome to the Apple community.
    The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
    You may well wish to make sure that the DVI connection works before spending any money on a DAC..

  • How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

    How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

    You need to find out what video out you have on your iMac, and what kind of video inputs there are on your TV.
    It will help to know exactly what model iMac and exactly what make/model TV you have.
    Depending on the exact model iMac you have, it may have miniVGA, miniDVI, miniDisplayPort or Thunderbolt output.  Your TV may have composite, S-video, component, DVI, VGA or HDMI inputs.  Once you confirm what kind of ports your iMac and TV have, then we can probably suggest the correct cable or adapter so you can connect them to each other.

  • How can I connect my iPad Air to a tv to watch Netflix

    How can I connect my iPad Air to a TV  to watch films on Netflix

    You can get the Lightning Digital AV Adapter and an HDMI cable.
    See here: http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter

  • How can I connect mini to headphone amplifier?

    I used to use windows to play my music when I sit in front of computer and use my headphone. My FLAC music is saved in an external hard drive. I use Foobar 2000 player to play FLAC. Between my headphone amplifier and window mobo is optical cable. Now I want to try that on the mini but it does not have optical output. How can I connect the mini to the headphone amp without having to degrade the sound quality below the optical connection I used to use on the windows? Thanks.

    What model mini?
    It should have an optical out included in the headphone jack, You need:
    http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6
    http://www.amazon.co.uk/Belkin-Digital-Optical-Blu-ray-Receivers/dp/B005OYC3C0
    Mac mini (Late 2012): External ports and connectors

  • How can I connect ATV to my Bose Lifestyle 8 system?

    How can I connect my 3rd generation Apple TV to my home theater BOSE Lifestyle 8 system (1999)?
    In the BOSE reciver there isn't optical output just analog.
    what the solution for this issue?

    The problem is with the Bose bar and not the Apple TV .  I have confirmed that sound is Transmitted from both the HDMI output and the Optical (Toslink) output simultaneously from the Apple TV
    The BOSE bar AUTOMATICALLY selects the best quality signal . You can't select it.   So HDMI  will win and once the TV is off,  audio will not work. 
    The AUX port is essential useless as Bose told me its for "Redundancy" and you can't "select" to use it. 
    What you need is an optical selector .  I bought this one for around $20 from amazon .  I like it because its black and you can connect up to 4 devices. 
    http://www.amazon.com/gp/aw/d/B005BXVB3G
    Because the Bose bar inputs from the Optical out on the back of the TV,  have it now go through the selector.  Your Apple TV can be input 2 . 
    You can now watch TV or Apple TV normally but if you want to still hear the music from Apple TV ,  manually change the selector to input 2 on the optical selector device .  When you turn off TV it will still play sound coming from apple tv's optical output . 
    Works perfectly !  Cheap work around .  Unfortunately for such an expensive Bose device you shouldn't  need to buy "work arounds" but I'm very happy with the sound quality and I'm a Bose believer .   So it was worth doing . 

  • HT5219 how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

    how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

    Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
    www.drbott.com

  • How can I connect personal hotspot to use the internet from my phone on my laptop?

    I do not have internet at home and want to be able to connect using the personal hotspot on my phone. How do i do this??

    How much would be a month?
           From: Verizon Wireless Customer Support <[email protected]>
    To: kelly johnson <[email protected]>
    Sent: Wednesday, October 8, 2014 12:02 PM
    Subject:  - How can I connect personal hotspot to use the internet from my phone on my laptop?
    #yiv3595356488 img
    |  
    |
      | 
    A message from the Verizon Wireless Community
      |
    |   |
    How can I connect personal hotspot to use the internet from my phone on my laptop?
    created by Verizon Wireless Customer Support in iPhone 4S - View the full discussion                  Hello kmj65
    Thanks for replying. The plan you have it would be an additional charge to add the hotspot feature. It's not free with the Nationwide plan. You would need to add the feature online at www.verizonwireless.com/myverizon
    JoeL_VZW
    Follow us on Twitter @VZWSupport   Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in iPhone 4S by email or at Verizon Wireless Community
    | 
    | 
    © 2014 Verizon Wireless
    Verizon Wireless
    One Verizon Way
    Mail Code: 180WVB
    Basking Ridge, NJ 07920
    Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
      |
    We respect your privacy. Please review our privacy policy for more information
    about click activity with Verizon Wireless and links included in this email.
      |
    | 
    |

Maybe you are looking for

  • Spfile error on windows 2003

    Hi, we are installed clusterware on windows 2003.and the database software. we created 5 raw device for ocr,ocr mirror,voting disk and remanings are for datafiles and controlfiles. we installed successfully.but when we reboot the system,we got the er

  • DI Connect to SBO after load from Transaction Notification

    Hi all, I saw few posts on this issue. I want to connect to SBO after class was loaded by TN. SBO and DLL hang. someone solved it using SQLAgent - please explain..? is there any other solution??

  • Attach native thread to jvm takes much time

    Hello everyone, I attach a native thread to the jvm. It works but it takes about 10 seconds. I do not understand why and I would like to reduce this time to 1 or 2 seconds. I use a native thread to get keyboard events (a hook) to capture a screen are

  • TS1702 why has my apple id been disabled and how do i fix it

    Why has my apple id been disabled and how do i fix it??

  • Please help me to check whether it is right

    I'm studying the Labview and trying to finish a VI, but I don't know whether it is right? Please help me to check it. My VI is frequency modulation that 30Hz baseband modulate 9960Hz Subcarrier, and they phase is 1. Attachments: Subcarrier FM.vi ‏19