How can I connect a button in a MSO with a different MSO?

I created a slideshow which contains a button that needs to be connected with another MSO, which appears as a pop up window and contains another element that has an the overlay: pinch & zoom. Is this possible to be done?
Somehow the programme does not allow me to choose between 2 MSO in an article (DP).
Can you help me with a tutorial?
Thanks in advance!

Thank you for the reply.

Similar Messages

  • Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

    hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

    Marco,
    Here are some suggestions:
    1) Check the manual the Keithley manual to see how to configure the RS-232.   
        On some models you need set Factory defaults to USER and turn on the RS-232.   
        Also there may be a setting for SCPI which you want on (probably on by default).
    2) On your PC - open Device Manager. See if a COM port exists and is functional.
         You must get this working before continuing.
          You can set the COM port parameters by right clicking and selecting Properties.  
         (On some PCs the onboard ports can be disabled in the BIOS)
    3) If step two was OK, open MAX (Measurement and Automation eXplorer).      
        On the left side, click on Devices and Hardware.   
        Click on Serial and Parallel.   
        Go to the COM port you found in Device Manager.   
        Open a VISA Test Panel.
        Now I don't have one I can look at right now, so this is general idea:
       Configure the COM port to match the Keithley settings (should be OK if step 2 worked)  
       Go to the (I think) Input Output tab (you want to send a command)   
       The command string input should already have a *IDN? entered, if not, type it in.   
       Click on the Query button to send the command and check the response.  
       If you get an ID string back (Company name, Model, FW Version ...) then it works.   
       (Disregard an error saying it did not get enough charcters back.) 
    I hope this helps,
    steve
    Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
    question. Give "Kudos" to replies that help.

  • How can I connect to a database from ipaq with cldc??

    how can I connect to a database from ipaq with cldc??

    Hi Again
    There is a library by Mimer which allows you do connect to a Mimer SQL Server, don't know must about it, but here is a link.
    http://developer.mimer.com/
    If that doesn't suit you, I suspect that you will have to use some sort of proxy solution. Either by creating a servlet to accept the sql string you want to send, or by creating your own custom proxy server running J2EE. The servlet or the proxy server must be able to receive an SQL String, do the query to the actual database and return the results in some sort of format to the mobile device. Maybe just a space delimited string.
    Hope this helps
    -Daur

  • How can I connect radito button choice to apppriate Jpanel?

    I am creating a J frame.
    I have given choices as radio buttons.
    say i have 2 radio buttons.
    Rbutton1 Rbutton2
    and if i choose Rbutton1, i want to pop up a window [Jpanle] associated with Button 1.
    Let say label of Button 1 is Bird
    label of Button 2 is Animal
    I want if i select Bird, it should pop up window to enter information of Bird , Name:- , flying habit:- etc
    same way if i select animal, it should pop up window to enter information of animal: Name:- , etc..
    As input windows are different for different categories[Bird,Animal], It should not show when you run a frame, it should pop up when you do selection.
    How can i do this?

    Well I think it's my turn to help someone.
    Although your problem seems to be very general, and BIG I recommed to implement an ActionListener and add it to your buttons.
    private JButton createButton(final String label)
              JButton button = new JButton(label);
              class buttonListener implements ActionListener
                   public void actionPerformed(ActionEvent event)
                                                         if(label.equals("'Label of the button for example OK or cancel"))
                                                           Do stuff;
                           buttonListener listener = new buttonListener();
                button.addActionListener(listener);
                return button;
    }I hope this helps you, although reading a tutorial will be more helpfull

  • How can I connect a client java desktop aplication with the server of jsf

    I need to connect a desktop aplication with a jsf, I need to know how I plug the desktop aplication. I open a connection and then what. I need to send faceBean or a HTML documment or a EL document class. Please help me. I don't know how to do this. If u have examples or code would be great.

    ok, the problem is how to send events to the jsf, how to maintain the session, and other kind of stuffs, this works with the browsers but not with my connection. The problem is not the conecction. The problem is keep the advantages of jsf with my connection. Im using a button in a jsp page connecting to jsf implementation mojarra and works for the events. but with my desktop connection and the same parameters crash with a exception java.util.zip.ZipException: incomplete dynamic bit lengths tree.
    this happens when I try to send the next parameter to jsf, javax.faces.ViewState=ANY VALUE.

  • How can i connect my Panasonic Viera Link TV with Airport Extreme?

    I use the Panasonic adaptor that came with my Blu-ray player. It worked with my Panasonic plasma TV when I used a NetGear router, but I recently changed to an Airport Extreme router and now neither the Blue-ray nor TV will connect. They find my network, but when I enter the password, after waiting a while, I get an error message that the network timed out. My iPad, iPhone, and MacBook Pro and MacAir all connect fine to this router from anywhere in the apartment. I am not using the wrong case when entering the letters of my password. It's exactly the same passsword that I enter on all my devices. Please help me connect the Panasonic TV to the Airport Extreme--I do NOT want to use ethernet. I want to use the wireless connection. Again--it worked fine withe the Netgear router, but does not connect wiht teh Airport Extreme.  Thanks!

    Checking the specifications of your camera, I see it as a Firewire out .
    DV:  4-pin, digital input/output, IEEE 1394 standard     (IEEE 1394 is Firewire)
    So you should be able to connect it to your Mini via the Firewire 800 port.
    You will need a Firewire 400 to Firewire 800 cable because the Firewire on the camera is a 400.
    But I couldn't fine any info that confirmed this model is compatible with iMovie if this is what you plan to use for editing.
    There is a work around but it is not very easy.
    Simplest way to import your videos is still Elgato video capture, but it will not give you the same quality as DV

  • I have a new ipod and when I sign in to Words with Friends it says that user name is already in use. How can I continue using the same user name with a different ipod?

    I have a new ipod and added all my apps to it. When I sign in to Words with Friends it says that "user name is already in use" because it is linked to my old ipod. How can I use the same user name with my new ipod?

    Was the iPod setup via iTunes on this computer?
    Setup via wifi?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?           
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Try syncing using the manual method                 

  • Please help! How can I validate Radio Buttons and List Menu with PHP.

    Hello everyone, I have been learning PHP step by step and
    making little projects.
    The point is I find it easy to learn by doing "practical
    projects."
    I have been reading the David Powers's Book on PHP Solutions
    and it's really great, however there is nothing mentioned regarding
    Validating Radio buttons. I know the book cannot cover every aspect
    of PHP and maybe someone in here can help.
    I have been learning how to process HTML forms with PHP.
    The problem is every book or tutorial I have read or
    encountered fall short on validation.
    I'm wondering how I can learn to validate Radio Buttons and
    Select List Menu.
    I have managed to create validation for all other fields but
    have no clue as to how I can get validation for Radio Buttons and
    List Menu.
    I would also like an error message echoed when the user does
    not click a button or make a selection and try to submit the form.
    I would appreciate any help.
    Patrick

    It's not that default value is "None." In fact it's not. It
    will only be
    "none" when the form is submitted.
    Also if your submit button is names 'send' then
    $_POST['send'] will only be
    set if the form was submitted.
    Make sure you didn't hit the refresh button on your browser
    which usually
    reposts the information. Also make sure you did not reach the
    form from
    another form with the same button names.
    Otherwise paste the snippet.
    Also you can check what fields are set in the post array by
    adding this to
    the top of (or anywhere on) your page:
    print_r($_POST);
    Cosmo
    "Webethics" <[email protected]> wrote in
    message
    news:[email protected]...
    >
    quote:
    Originally posted by:
    Newsgroup User
    > Off the top of my head this should be no different than
    your radio buttons
    > except that 'productSelection' will always fail the
    !isset check when the
    > form is submitted since the default value is "None", and
    therefore always
    > set. :-)
    >
    > So how about this..?
    > <?php
    > if (isset($_POST['send']) and
    ($_POST['productSelection'] == "None"))
    > {echo "Please select a product.";}
    > ?>
    >
    >
    >
    >
    > "Webethics" <[email protected]> wrote
    in message
    > news:[email protected]...
    > > Another question - how do i applied the code you
    just showed me to
    > > select
    > > menu
    > > or select list?
    > >
    > > This is the list:
    > >
    > > <div class="problemProduct">
    > > <label for="productSelection"><span
    class="product_label">Product
    > > Name.</span></label>
    > > <select name="productSelection" id="products"
    class="selection">
    > > <option value="None">-------------Select a
    product----------</option>
    > > <option value="Everex DVD Burner">Everex DVD
    Burner</option>
    > > <option value="Vidia DVD Burner">Vidia DVD
    Burner</option>
    > > <option value="Excerion Super Drive">Excerion
    Super Drive</option>
    > > <option value="Maxille Optical Multi
    Burner">Maxille Optical Multi
    > > Burner</option>
    > > <option value="Pavilion HD Drives">Pavilion
    HD Drives</option>
    > > </select>
    > > </div>
    > >
    > > I thought I could just change the name is the code
    from operatingSystem
    > > to
    > > productSelection.
    > >
    > > Something like this:
    > >
    > > From this:
    > >
    > > <?php
    > > if (isset($_POST[send]) and
    !isset($_POST['operatingSystem']))
    > > {echo "Please select an operating system.";}
    > > ?>
    > >
    > > To this:
    > >
    > > <?php
    > > if (isset($_POST[send]) and
    !isset($_POST['productSelection']))
    > > {echo "Please select an operating system.";}
    > > ?>
    > >
    > > But this does not work, any ideas?
    > >
    > > Patrick
    > >
    >
    >
    >
    >
    > Hey, I tried this about but as you mentioned, since the
    default product
    > value
    > is "None" an error message appears when the page loads.
    >
    > Is there a way to code this things so that even though
    the default value
    > is
    > "None" there ia no error message untle you hit the
    submit?
    >
    > When I applied the code, it messes up the previous code,
    now the operating
    > system is requiring an entry on page load.
    >
    > When I remove the code from the list menu everything
    goes back to normal.
    >
    > I know this is a little much but I have no other
    alternatives.
    >
    > Patrick
    >

  • How can I connect my iphone to my computer with the new upgrades? My mac (old) cannot support the new itunes and my phone can't connect to it.

    I have a macbook that I purchased in 2007 with operating system Mac OS X Version 10.5.8. I recently did the new software upgrade on my iPhone and now my iPhone and my computer cannot connect. I tried downloading the newest iTunes but it is not supported by my software. What can I do now? (Other than buy a new computer).

    Is the new iTunes library on a different computer, or the same computer?
    Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
    Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact.

  • How can I connect a DLT-IV Tape drive with SCSI interface to Quad G5?

    I have had no problems with my "Quantum equivalent La Cie DLT-IV Tape drive" on OSX connected to the G4 Quicksilver using an Adaptec 2930CU PCI card - but I can't move that to the G5 as it has to be PCI-Express cards as far as I can tell.
    Adaptec pre-sales support inform me that Adaptec have no Mac support in their current product range.
    Has anyone found a solution to this connection requirement that will work with Retrospect and DVD StudioPro?
    If there is a workable solution which is no longer available to buy - I would still be interested in knowing so I could scour ebay for it.
    TIA,
    Richard

    Hi Richard;
    If you go to ATTO, they are offering a ExpressPCI PSC which include a SCSI bus on sale for $24.11.
    Allan

  • How can I connect HDTV to iMac to use with Apple Color?

    Hey guys,
    I use Color application a lot and the colors don't look the same outside of Color app once they come back to FCP the project is on a dvd...
    Is it possible to use an LCD HDTV with the iMac for Apple Color to see the colors would actually look on a TV?
    If yes, please let me know...
    If not, then is there a workaround?
    Thanks in Advance

    Ben...no one mentioned the MXO2. Talking about the original Matrox MXO...connects via DVI. And it has Component and SDI outputs. Works with professional broadcast monitors. On that note, the MXO2 also has those connections.
    And a GOOD HDTV will work for many non-broadcast workflows. Not everyone does broadcast work, so they don't all need broadcast monitors.
    But, I'm sorry to say that the original MXO doesn't work with the latest batch of iMacs, nor the generation before this. It is old hardware designed for older machines. An iMac just won't work for this purpose. Sorry.
    Shane

  • How Can i connect using Thunderbolt a Macbook Pro with the New iMac

    I bought the new Macbook Pro with Thunderbolt and instead of buying a new external monitor, i am thinking that the new iMac with Thunderbolt is a great idea.
    Is there a cable to connect the Macbook Pro and use as iMac as external monitor, using Thunderbolt.
    thanks

    I understood your question perfectly and the answer is absolutely yes. When you change the iMac into target display mode you underlying operating system continues to run all existing applications. For example in my case if I finished editing some video and am about to enter a lengthy render process or something which may draw lots of resources like hand real, I set it to start on the iMac and then switch it to target display mode to use it as a monitor with my MacBook air in the meantime.
    Only one small caveat in your case though.  Since the target display mode is a feature of OSX (eg the OS interprets the special key stroke and changes the iMac into target display mode) you should make sure Lion server supports the target display mode feature. I don't see a reason why it wouldn't but that's the only thing currently crossing my mind. Keep in mind the compatibilities between ports as noted in my blog. If any of your machines have mini display port and you intend to connect the new iMac in target display mode you will run into issues. In that special scenario, I recommend buying a refurb iMac from 2010 which urtilize the displayport allowing you to use it as a display for all your macs -- those with thunderbolt as well as those with displayport. If you have thunderbolts then definitely go with the thunderbolt iMac.

  • How can I connect my imessaging from my phone with the imessaging on my macbook?

    I want my imessaging from my phone to correlate to my computer.

    Associate your mobile number with your Apple ID, if you haven't already done so.
    Sign out of iMessage on the Mac:
              Messages ▹ Preferences ▹ Accounts ▹ Sign out
    and on the iPhone:
              Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap
              Use Your Apple ID for iMessage
    Sign back into iMessage on both devices and test.
    Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

  • How can I connect macmini '11 to the monitor with displayport only?

    Mini has a Thunderbolt & HDMI out only. What it is necessary for me?

    The cable is necessary or I should have the converter

  • How can I make iMessage work on 2 iPhones with 2 different phone numbers using the same Apple ID?

    My work requires me to split time between two countries (Ph and Bn). I had an iPhone 4 with a Ph number and a Nokia for the Bn number. iMessage was running on the iPhone 4 with the Ph number and my apple ID. I recently replaced the Nokia with an iPhone 5 which I set up using the iCloud back up of my iPhone 4. I cant seem to set up iMessage (and Facetime) the way I want it to work on the iPhone 5. Im not sure if iOS 6 would allow me to do this so I'm throwing this out to the forums to check if its possible.
    iPhone 4 w/ iOS 6
    - uses Ph sim card
    - Ph number set in Phone>My Number
    - iMessage>Send & Receive has the following data
    Ph Number - greyed outand checked
    Apple User ID - checked
    iPhone 5 w/ iOS 6
    - uses Bn sim card
    - Bn number set in Phone>My Number
    - iMessage>Send & Receive has the following data
    Ph number greyed out and not checked
    Same Ph number checked
    Apple User ID checked
    Ive tried turning on/off my iPhone 5 and logging on and off iMessage but I cant seem to get it to update the iMessage phone number to the Bn number. Any idea how I can do this?

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

Maybe you are looking for