How can i connect iphone 5 with izon wireless camera?

Hi
How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
What is wrong??????????

I would check if they have some info here
http://steminnovation.com/support
and then I would test it with other phones or a computer to verify that it's not broken

Similar Messages

HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

How can i connect iphone 4 with other mobile through bluetooth

how can i connect iphone 4 with other mobile through bluetooth

You can't. iPhone does not have this feature.
Some iOS apps will allow you to connect to other iOS devices for peer-to-peer games, or sending photos, but not to other makes of phone.

How can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again..

how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.

Yes, try to restore your iPhone from iTunes or iCloud backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Tell us the result if you will try.
<Link Edited By Host>

How can i connect iphone 3 to ipad 2?

how can i connect iphone 3 to ipad 2?

You can't physically connect an iPad and iPhone. You can blutooth connect, but not sure about iPhone 3.
iOS: changeing Personal Hotspot
http://support.apple.com/kb/HT4517
Use Bluetooth to your iPhone, iPod touch, or iPad
http://www.macworld.com/article/1159258/bluetooth_ing.html
How to Pair Bluetooth Device to iPad
http://www.ehow.com/how_6194904_pair-bluetooth-device-ipad.html
 Cheers, Tom

How can I sync iPhone with iPad

How can I sync iPhone with iPad

Huh? What are you trying to do? Be more specific.

How can i connect labview with ge fanuc versamax plc via VISA

I, ve a ge fanuc versamax plc. I am building a data logger in labview. There are two current trasmitters. I dont have any other data acquisition devices other than PLC. How can i access data acquired by PLC and how can i connect it with labview using VISA?

KPAC wrote:
I've a ge fanuc versamax plc. I am building a data logger in labview. There are two current trasmitters. I dont have any other data acquisition devices other than PLC. How can i access data acquired by PLC and how can i connect it with labview using VISA?
There may be variations between models, but I believe all VersaMax support Modbus and GE's own SNP/SNPX serial communication protocols.
For Modbus communication protocol:
The link here is a good outline of the different options available. If you really want to limit yourself to the option of using VISA, then it's Items 1. and 2. in Khalid's list that are applicable. You might have to modify some of the free LabVIEW Modbus VIs to suit you needs, but they are useful as examples if you have little experience programming a serial driver.
For SNP/SNPX:
Your options are similar to those for Modbus, except that I'm not aware of any existing free set of LabVIEW VI's for it. With a web search you might find something (I almost programmed one 10 years ago). The SNP/SNPX protocol is/was well documented in a GE FANUC manual which you could get from them (in 1993 it was GFK-052B "Series 90 PLC Serial Communications User's Manual") so you still can write your own set of VIs.
If you don't really need to limit yourself to using VISA, there are ActiveX and OPC drivers available which use SNP/SNPX that you can find with a web search. And you can see here that NI's Industrial Automation OPC Server's do include an object for GE Fanuc Versamax via Ethernet. This would not be the cheapest in terms of capital cost though.
Good luck.
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Can i connect iphone with itunes on windows pc?

can i connect iphone with itunes on windows pc?
and if i can, am i going to lose everything if the device is the fisrt time is connecting with this pc?

Yes you can connect it.
You will only loose everything if you choose to sync. If you don't then no. But then you won;t be able to do much while connected, as any transfer of data (music, movies, etc..) will require a sync.

HOW CAN I CONNECT IPHONE 4 INTERNET TO MY PC USING USB CABLE

HOW CAN I CONNECT MY IPHONE 4 INTERNET CONNECTION TO MY PC USING USB CABLE AND I HAVE DONE TETHERING IN MY PHONE AND ALSO DOWNLOADED ITUNES USING FLASH DRIVE AS I HAVE NO INTERNET CONNECTION IN MY PC AND IN MY PC THERE IS NO DETECTION OF ANY APPLE DEVICE. PLZ HELP ME

First, knock off the all caps typing. It is considered shouting, rude, and is just plain hard to read.
Since you use the term "PC," are you using an Apple computer or something that is Windows based?
Barry

I have an iPod tuch 2g. How can I connect it with ITunes

I have an Ipod tuch 2 g How cn i connect it with ITunes

Install iTunes on comuter and connect the iPod to your computer via the USB cable
If iTunes does not see the iPod:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system

Dear Friends
My Basis has configured SLD in Solman, Now I cant use SXMB_IFR tcode in my PI that suggest me some error. saying "error in connection cant read secure connection config" or something like that. Plus SLDCHECK tcode is also not happy. it suggest that RFC connections are missing.
It is clear that My SLD is not linked with PI system. something is missing in technical system part and its not even bridged. but since I am not a BASIS guy I dont know How can I configure it. Not even my BASIS guy understands that I need to bring SOLMAN SLD to PI.
Can anyone suggests me How can I bring my SOLMAN SLD to PI system so I can run SXMB_IFR tcode ? I need to create some rfc connection like LCRSAPRFC and SAPSLDAPI but dont know the connection type like t, or something else. Please englight me by suggesting How can I bring my SOLMAN SLD to PI.
One intresting observation is when I try to run my SLD over url using PI system as host it comes but says SLD is not configured properly and when I did the same practice with SOLMAN host it works fine and I didnt receive any error.
Please reply me. your any help will be appreciated greatly.
Regards
Naeem

Hi,
Preferebly PI should have it's own SLD. And SOLMAN could use PI's SLD.
Please check Installation guide and SLD Administration Guide from Service Market place before finalizing SLD architecture in your System landscape.
I guess SOLMAN will have only one Instance in system landscape. (Not three system landscape like Dev, Qa, Prod).
If you want to go ahead with your current SLD plan, then Change your SLD hostname in Exchange Profile of PI, to SOLMAN Host name.
Regards
Praveen K
Edited by: Praveen Kurni on Jul 7, 2011 6:12 PM

How can I connect more than one wireless speaker to my ipad

i have a mini iPad and have linked two wireless Bluetooth speakers but they will only work one at a time. How can I get them both to work together ?

Yes and it's very easy to do once you know what to do.
Place all of the photo albums that you want to transfer to the iPad into one main photos album on your PC. When your iPad is connected to your computer's iTunes and after you have selected the iPad under Devices, click on the Photos tab and in the Sync Photos from heading - select that main photos album that you place all of your other photos folders into - select each album that you want to sync - and then click on Apply in the lower right corner to sync the photos to the iPad.
iTunes: Syncing photos - Apple

How can I connect PS3 with my iMac?

I am using a 21 inches iMac all in one pc.... and i found out that i could connect it with the ps3... but I have no idea which adapter do i have to use and where i can get one....? If someone knows abt it, pls do share the information with me as soon as possible thanks...

https://discussions.apple.com/thread/3578774?tstart=0
xbox, pc, blueray player, ps3
hdmi is hdmi and it all works the same way

How can I connect to a remote firewire camera?

We have a system that has the following peripherals connected to it:
1 - firewire camera
2 - serial port devices
2 - emulated serial port devices (on VCP USB drivers)
1 - Ethernet device
We have developed an application using CVI 8.1, NI Vision 8.6, and NI-IMAQdx 3.2 (it's an older cam). I would like to make this system accessible remotely (not remote desktop) and was looking for a way to program a server/client setup. Although it will be a lot of work, we can easily take care of a protocol for the Ethernet and serial devices. Where I'm getting stuck is the camera.
I've searched the forums and it seems that people can use the RT software module on specific host hardware to do just that. We don't want to invest in purchasing a separate software module or another piece of hardware, so I was wondering if it was possible to configure MAX or the NI vision server somehow to connect to a remote win7 PC to grab frames and configure the camera OR is there an easy way that I can transfer the stream over TCP/IP?
The only solution I can come up with is the grab a frame, save to .PNG, transmit it, and then load it on the client side. This seems very wasteful (and slow considering the harddrive will constantly buffer the data) and I would need to do a lot of encapsulation for changing camera settings, etc. Further, I'm not sure how well this would work for when we try to calibrate the camera with the IMAQ drivers. Is there a way to get the size and all relevant data structures in memory of the vision server so I can transfer them?
Finally, if there is a simple way of configuring and doing all of this for the camera that I'm missing (through MAX), then is there a similarly easy way of mapping the remote serial ports and of bridging the Ethernet data? I know there are a few pieces of existing software for the serial ports, but was looking to make a single software solution.
Thanks for taking the time!
-Stan

Hi Stan,
Welcome to the NI Discussion forums! Thanks for posting your application here. There certainly are more efficient ways of streaming IMAQ images over a network. One such method would be to convert the IMAQ image type to a 2D array and then pass the data through TCP/IP, as you eluded to. Do you have access to LabVIEW? If so, you can look at this community example and base your CVI code on it. Although it is meant for a Real-time CVS acting as the remote system, you should be able to run the code on a regular PC. If you don't have access to the LabVIEW development system, the overall code structure for the server system is as follows:
- Open IMAQdx reference, initiate a TCP connection, Create IMAQ image buffer
- Initialize an IMAQdx grab
- Loop:
- Call IMAQdx grab
- Use the IMAQ Flatten Image to String to convert the IMAQ image to a string
- Call TCP Write to send the string length first, then again to send the actual string data
- Dispose of the IMAQ image buffer, close the IMAQdx reference, close the TCP connection
On the client end, you just need to open the TCP connection and call TCP read to read the string size and then the string data. Then, you can use the unflatten from string function to convert the string back to an IMAQ image data type. After this, it is up to you how you want to process the data (display it on the screen, write to an AVI file, etc).
If you are not sure how to implement TCP/IP programs in CVI, please take a look at this tutorial. If you have more in-depth questions about implementing the TCP/IP side of the program in CVI, you may wish to post that specific question on the CVI board.
With regards to mapping the serial ports remotely, if you are already using NI-VISA for COM port communication, take a look at this document on Remote Instrument Control with NI-VISA. Essentially, you should be able to access the VISA resource (e.g. a COM port) remotely by enabling the remote NI-VISA server on the client machine. For more specific help with this aspect of your code, please post to the GPIB/VISA board.
Feel free to post again here if you have more IMAQ and vision-related questions. Hope this helps!

Pearl 9100 OS 6 Dial-Up Networking DUN (How can this be done with Telstra) Wireless Modem for Mac

Hi
I would like to know how i can have dial-up networking (Using my Pearl 9100 OS 6 as a wireless modem for my Macbook Pro 6.2) and also the information that has to be applied for Telstra Australia..
Thankyou
Solved!
Go to Solution.

Hi and Welcome to the Community!
Refer:
KB19641 How to Configure a BlackBerry smartphone as a tethered modem on a Mac
Note carefully please that this feature requires your service plan to include the capability...not all service plan levels include it, and not all carriers offer it. Further, sometimes additional software for your computer must be obtained from the carrier. But, any and all carrier-specific questions about this must be addressed to the carrier...here, we can only give you the generic information...your carrier must provide you with any specific information required.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can i connect iphone 5 with izon wireless camera?

Similar Messages

Maybe you are looking for