How can I connect my mobile device on the same network with my printer

I have pictures on my mobile device but I am unable to print them on my HP Photosmart plus printer. I was wondering how am I able to make sure that my printer and my mobile device is on the same network so I can print my pictures or either be able to save them to my memory card?

Hi,
Are you talking about iPad, iPhone ?? If YES then please check your printer on this list,(updated on 15Dec2011) it must be an AirPrint enabled printer to be able to print from iPad, iPhone. If YES (again), you can use AirPrint on your iPad to print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Can I prevent av AirPort Extreme from "discovering" and connecting other Airport devices on the same network ?

    Can I prevent an AirPort Extreme from "discovering " and connecting to other Airport devices on the same network ?

    Not sure I understand your question.
    What is the AirPort Extreme doing now that you don't want it to do? What does it "discover"?  How is it connecting other devices on the same network?

  • How do I get all my devices on the same network?

    I recently purchased a 6th generation Airport Extreme to support the Wi-Fi demands of my household. Between streaming on Netflix, downloading games on Steam, and reading our emails, my household is no lightweight in Wi-Fi usage. We have 17 devices in total for the household which we have connected to the Wi-Fi, but not all of them are connected at the same time. 
    I would like to connect all of them to the main network of the router, so that I could enable file sharing on all of them, but unfortunately, this isn't working as intended. I will abbreviate the name of my networks as "MN" for main network and "GN" for guest network.
    There are a few of my devices which do not want to work with the MN, so I have them on the GN so that they are still connected to the internet. Whenever I connect some devices, it will attach to the network just fine, but trying to send or receive data packets the device usually stays loading for a few minutes before it says it cannot connect to the network.
    What are some troubleshooting tips that I can use to have all of my devices connect to the same MN?
    I've tried messing with the router settings a little bit, but if you have any suggestions, whether I do it on my devices I want to connect to the router, or change the settings on the router itself, I am open to suggestions as I cannot figure this out, even with some detailed googling. Thank you in advance for any help that you give. If you need more details about the devices or router, I am definitely available for that.

    Different services on your iOS device (iMessage, Facetime, iCloud, iTunes and App Store) can be signed into with an Apple ID of your choice. Make sure you verify the settings for each device and that you are signed in to each service with the correct Apple ID.
    I'll do an example for iMessage:
    1) Go to settings on your iOS device
    2) Select "Messages"
    3) Select "Send & Receive"
    4) At the very top you will see "Apple ID", by selecting your Apple ID, you will now have the option to sign out of messages with the current Apple ID, and sign in with the new one.
    The steps for changing your Apple ID for other services will be very similar.
    tHIS SHOULD BE VERY HELPFUL TOO YOU.

  • Can't connect to another Mac on the same network

    Hi All,
    I have a MacBook Pro and an iMac, both connected to the same network.
    When I try to access one using the other over wifi, using Finder, either it doesn't work (getting a "Connection failure" message"), or it takes several minutes and several retries. Once the connection is established the file transfer speed is very good, but it takes forever to establish a connection.
    On the same network I have an iPhone, an iPDa, a PC. They all connect very fast, so I don't think it's a network issue... can anybpdy please help with this?
    Vignus

    Bump

  • How can I connect 2 bluetooth headets at the same time?

    I have a I Pod Touch 4G.  I got it to use on my Gold Wing GL 1800 trike on trips.  I am using a Sena SMH10D as a bluetooth headset.  The touch recognizes my headset and my wifes too.  Problem is that it will only send music to one or the other.  How can I send the music to both headsets at the same time?

    While not the answer I was hoping for, it did answer the question.  Thanks for the fast response.

  • How can I maintain two tables content at the same time with SM30

    Hi all,
    I created two customizing tables that I would like to link together for maintenance in SM30. Table 1 is the header and table 2 can have multiple detail records.
    They are linked via the ID key field. I would like to run the Table Maintenance Generator on the first table in SE11 and be able to maintain both table data at the same time in SM30.
    How can I do that without any ABAP programming? Should I use Append or Include structure or else?
    Thank you for giving as much detail as possible.
    Regards,
    Sylvain

    Hi,
    You cant do it w/t abap programing.
    You can code in "EVENT" to achive the same.
    Open table maintainance generator of first table through se56 or se11.
    follow the path: environment>Modification>Event.
    Select sutaible event from drop down like Before Save... and do coding.
    In this way data will be saved in second table automatically when you save in first table.
    In case of any query, please revert.
    regards,
    Dhan

  • Can you use 2 apple tvs on the same network with different apple ids and how would your devices know which apple tv to stream to?

    Hi,
    I was looking into purchasing 2 apple tvs and was wondering if they can be setup with different apple ids. I need to have mine setup with my id and be able to hook my devices to it , but have the one in a bedroom hooked to a different apple id and have my friend's devices stream to that one and not mine.  Is this possible?

    Welcome to the Apple Community.
    In order that your Apple TV only streamed from your iTunes Library and your friends to your friends, you would both have to have different homesharing ID's.
    So far as devices go, any device on a network can stream over AirPlay to an Apple TV, to ensure each of you couldn't stream to the others device you can enable a password via the Apple TV which would then need entering when you used a device for AirPlay.
    Shouldn't be a problem to do what you want to do.

  • How can i connect a usb device (keyboard) into ipad 4

    How can i connect a usb device (keyboard) into ipad 4

    The only keyboards that will work are bluetooth ones and keyboards made specifically for iPad.

  • How can I connect personal hotspot to use the internet from my phone on my laptop?

    I do not have internet at home and want to be able to connect using the personal hotspot on my phone. How do i do this??

    How much would be a month?
           From: Verizon Wireless Customer Support <[email protected]>
    To: kelly johnson <[email protected]>
    Sent: Wednesday, October 8, 2014 12:02 PM
    Subject:  - How can I connect personal hotspot to use the internet from my phone on my laptop?
    #yiv3595356488 img
    |  
    |
      | 
    A message from the Verizon Wireless Community
      |
    |   |
    How can I connect personal hotspot to use the internet from my phone on my laptop?
    created by Verizon Wireless Customer Support in iPhone 4S - View the full discussion                  Hello kmj65
    Thanks for replying. The plan you have it would be an additional charge to add the hotspot feature. It's not free with the Nationwide plan. You would need to add the feature online at www.verizonwireless.com/myverizon
    JoeL_VZW
    Follow us on Twitter @VZWSupport   Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in iPhone 4S by email or at Verizon Wireless Community
    | 
    | 
    © 2014 Verizon Wireless
    Verizon Wireless
    One Verizon Way
    Mail Code: 180WVB
    Basking Ridge, NJ 07920
    Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
      |
    We respect your privacy. Please review our privacy policy for more information
    about click activity with Verizon Wireless and links included in this email.
      |
    | 
    |

  • HT1695 How can I connect my MacBook to Internet over cellular network

    How can I connect my MacBook to Internet over cellular network?

    Read here:
    http://support.apple.com/kb/ht4517

  • HT5538 How do you separate multiple iOS devices using the same apple id account for Face Time calls and iMessaging?

    How do you separate multiiple ios devices using the same apple id account for Face Time calls and iMessaging?

    The only way I have seen is to have each device use a if fervent email account, if they all are on the same email the FaceTime connection is either to a phone number or to an email address.  If they ar all on the same email, it is up to the user to decide which to use.

  • I cannot connect my iPhone 4S to my home wifi. When trying to connect it says I have the wrong password, but I can connect my MacBook to the same network with the same password. I have tried to restart my router, reset my network settings, fail!

    Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
    The only thing different is I just moved, but I have the same router/phone/internet provider.
    I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
    The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
    My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
    Thanks!

    If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.

  • How can i use offline & online database in the same time?

    how can i use offline & online database in the same time?
    my database in another server when the connection true it connect
    but if not does not work
    i wanna make offline database if the server not connected it connect offline then the server is on it alter all data from the offline to the server.

    User, please tell us your Jdev version!
    There is no such functionality build into the framework. The offline data base is only for designing the db, not to have a backup db.
    If you can't connect to the db the application will not work.
    Timo

  • How can I get my ipad to reflect the same playlist order that appears on my computer?

    How can I get my ipad to reflect the same playlist order that appears on my computer?  My computer has the exact desired order of playlist, but once the system is synced, the ipad does not reflect the propper order.

    In iTunes with your playlist shown in the correct order, right-click on the playlist name in the side-bar and click Copy to Play Order. Enable the side-bar with CTRL+S if necessary. Sync. Note also that the column you are sorting on should have the small triangle pointing upwards, otherwise the songs will play in the reverse order. You may also find that you need to first remove, and then add back the playlist to the device if syncing doesn't update it properly. See this post for more.
    tt2

  • How can install a second app icon  of the same on app on a different home screen?

    how can install a second app icon  of the same on app on a different home screen?
    for example i have the phot app on one home screen and the i want the same photo app showing on the other home screens?
    I want to have a duplicate app on on more than one home screen
    Another example if i have the Evernote app showing on my first home screen and then my last home screen as well

    Put it in the dock at the bottom. Apps put there stay there and show at the bottom of all home screens.

Maybe you are looking for

  • How much data is too much through a DB_link?

    Hello, I need to move data from approximately 40 tables from Oracle into a SQL Server.  I see the ODBC/database link method in this forum.  What is the recommended cutoff for amount of data moved through a DBlink?  In older versions moving a lot of d

  • DB_NAME used by the Logical Standby db

    Hi all, It's Oracle 11g R2 I have a general question about converting a Physical standby database to a Logical Standby database. An important step of the conversion procedure is to issue the following command: ALTER DATABASE RECOVER TO LOGICAL STANDB

  • K8N DIAMOND...how to connect??

    Hi there I am tring to connect the MB in object to my case (ANTEC P160), but I find that the connectors from case to MB are different or, maybe better, I don't understand very well how to plug them in the MB. From the case I have: PW_SW: orange and w

  • HT204406 how come i have songs that are EXPLICIT but when i upload them to itunes match, they are CLEAN??

    anyone know how to fix this?

  • Web service not responding

    Hi, Issue - Web service not responding when we deploye the .ear file in prod instance. Same web service working fine in test instance. We are using Oracle Enterprise Manager 10g server. It is urgent for us. Thanks,