How can I connect one 5508 and a 4402?

Hello all, I´m new to this forum. I want to consult you because of a situation that I have.
I need to install one 5508 and a 4402 together to bring redundancy to a wireless environment.
Can I do this?. What are the neccesary steps to perform this?, the idea behind this is to bring redundancy is the primary WLC falls for any reason.
Thanks so much in advance.
Regards!

The link will explain a lot, but one thing to make sure also is that your configuration between the two WLC's are similar except for host name and up address. You will also configure the ap with the primary wlc and secondary wlc info. This way the ap knows which wlc it belongs to and which wlc it needs to go to if the primary is unavailable.
Sent from Cisco Technical Support iPhone App

Similar Messages

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

How can we connect mac air and iPad to share all documents and downloads

How can we connect mac air and iPad to share all documents and downloads?

If you are referring to the "Documents" and "Downloads" folder in OSX, I suggest using https://www.dropbox.com

How can I connect one picture to another picture?

How can I connect three pictures?

Hi, and welcome to the forum.
Do you want to join the edges of three pictures, like you might when joining three images of a landscape into a panorama?
Or do you want to take elements from three images and combine them into one image?

How can you use one image and edit it three different ways to export later?

I am a new Lightroom 3 user. How can use the same image and edit it multiple ways to produce mulitple images to later export? For example, I have a picture of a bride and groom. I want to use that image and create a color image, a black and white image, and a close up of their hands.

Do I need to do either of those options before I start editing the image at all? For example, what if I am working on the image and doing some creative edits. Then I think of another option that I could do. Is it too late at that time or can I still get the original image to begin with?

How can I create one playlist and not have numerous ones that duplicate songs?

How do I consolidate all my playlists into one large playlist and eliminate the extras?

Hey there Christophter,
You can start consolidate your playlists by opening the one you want to move music FROM, then dragging the music in there to the playlist you want to add TO. If there is a duplicate you will be prompted to skip them or not. Then delete the playlist:
iTunes 11 for Windows: Delete songs, playlists, or other items
Click the item to select it, and press the Delete key.
Click DeleteItem.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

How can i connect home sharing and the control app with 2 IP addresses?

i am using my macbook pro at school and i also take it back home, and when i'm home the home sharing with my iPhone 5's Remote app works perfectly fine, just that when i'm back to res at school it doesn't work for some unknown reason. i've checked everything including the firewall and stuff and itunes home sharing is turned on, i even tried using another home sharing apple id but it still doesn't work. somebody please help!!!
thanks!

If you use eithernet for your main connection then just plug the TC bridged into the network.
If you use wireless for your internet connection then you can use the TC isolated from the network by ethernet.. but this is really only convenient on a desktop Mac.
The instructions I put in this thread with screenshots.. see near the bottom.
https://discussions.apple.com/thread/4817218?tstart=30
It is a bit tricky so if you have questions ask back here.
Just to say a USB for firewire external drive is faster and more reliable than a TC.. cheaper to buy as well.. although since you already have the TC that is not a concern.. but you can ebay the TC and buy a bigger and better external drive with the proceeds.

Linking multiple tables in numbers, how can I sort one table and this follow through on subsequent tables in the document?

I am a teacher setting up a tracking system using Numbers for the first time. I have set up a summary sheet with puil information, some of which is "looked up" from other tables within the document. It is working brilliantly until we regrouped the pupils.
When i reorganise the students on the summary page I want the same order to follow on all subsequent tables.
However the pupil lists on all subsequent pages stay in the original order!
Hope this makes some kind of sense as I am about to throw macbook out of the window!
DAve

davidmilce wrote:
I want all of the tick boxes in each row to move with the pupil name when they are reorganised (ie the unique data in each row stays with the pupi no matter where they go when sorted.
Thanks again
Dave
Dave,
I might use Match, Offset and Column in my expressions. There are many approaches to this
Match will tell you which row your person's data is in, and OFFSET will then take you to the row indicated by Match and the column indicated by COLUMN().
Let's say you want to access the data for Pupil A. Further assume that the string "Pupil A" is the content of Column A, essentially the title of the record.
MATCH(A, AF1 :: Table 1 :: A) will return the number of the Row in the source table where Pupil A is found.
INDEX(Main, MATCH($A, Main :: $A), COLUMN()) will get the content, in your case the checkbox status.
You are done if you are happy with displaying "TRUE" or "FALSE"
But if you want, you can substitute graphics, like this:
=IF(INDEX(Main, MATCH($A, Main :: $A), COLUMN()), "☑", "☐")
Regards,
Jerry

How can I connect my iPhone and my iPad for FaceTime

Every time I try to send iMessages it says not delivered.

FaceTime and Messages have their own set of settings which should be set up similarly. To send and receive iMessages and FaceTime calls on the iPad you have to setup an Apple ID. If both devices are using the same Apple ID iMessages should sync up and you can send yourself a message but it will appear duplicated on both devices. FaceTime will require each device to be set to it's own number or email address if you want to make calls between your devices.

HT1420 How can I merge one iTunes account into my other one. I have a work laptop that I've had one library one (work email address) and I also have a home library iTunes account (gmail address) but I want it all under one accnt.

I have two iTunes libraries (one under my gmail address and one under my work email address). My work laptop is usually how I access my account and in the past 3 months that laptop has had to be replaced twice, causing me to redo my entire library. Each time, the laptop was not deauthorized, of course and I had to go through all that rigamarole. I have all of my music backed up and am able to also retrieve anything purchased over the years from the cloud, but once i get it set up and authorize the laptop to both of the email address accounts, some of the items that are in the gmail library will not play. It says that it cannot locate. At one point, a friend spent a lot of time getting it to finally recognize everything (a lot of that music that said cannot locate was from burned CD's or mp3s downloaded, not purchased from iTunes). So there is that issue and I'm not sure how to fix that.
The other thing is that I would like to have ALL of my items under one iTunes account (my personal gmail) in the event that i no longer work for this company and have no access to that email address as it will be turned off. How can I remove one email and merge all purchases over to the gmail address account?
Thanks!

You cannot combine actual accounts (as in iTunes Store account).
You can combine the music into a single iTunes collection on a computer. There's many ways to do this. There are some utilities to assist with keeping maximum metadata (ratings, playcount, etc.) but I am not familiar with Windows platform ones to do this, though I am sure a web search of merge iTunes library would uncover some.

I lost my iphone in the woods and it is not connected to the internet. how can i trace it? and if i cant, can i take all the data, such as pictures from my old phone onto a new one?

so i was walkin in the woods and somehow i droped it. its not conected to the internet. i know because i checked icloud. when i walked around to look for it i used a friends phone to call it so it would ring, but it went straight to voice mail.
So, how can i trace it? and if i cant, can i take all the data, such as pictures from my old phone onto a new one?

if you installed find my iphone app on it you can do these things from icloud if it's online
if not you can't do anything

How can I connect my iPad to the iTunes while I don't have PC ,,can I go to the nearest apple store and they would do that or how I do with this ??

Plz I need help in how can I connect my iPad the new one (4G) to the iTunes while I don't have pc

Use a neighbors or something. You can use any computer to update and restore it. Once it's to the startup screen your good to go. Yes the apple store can help you too.

How can i connect my iphone to a new itunes library without losing my contacts and photos ?

how can i connect my iphone to a new itunes library without losing my contacts and photos ?

Is the new iTunes library on a different computer, or the same computer?
Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M.

How can I connect one 5508 and a 4402?

Similar Messages

Maybe you are looking for