How can i connect simple dc motor to labview

any one who help me how can i connect simple dc motor to labview and speed control of that

Hi,
There is a selection guide for motors on our website which can be found here: http://zone.ni.com/devzone/cda/tut/p/id/12594
There is also software specifically for LabVIEW to control motors.  You can find it here: http://sine.ni.com/nips/cds/view/p/lang/en/nid/13851
Regards,
Greg H.
Applications Engineer
National Instruments

Similar Messages

  • How can i connect the Faulhaber Motor to MID-7654?

    How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
    The Motor has following wires:
    A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C:  Hall sensor gray;
    C: Phase yellow; +5V: Voltage red; GND: Ground black
    The Encoder has:
    5: Channel B; 4: Vcc; 3:            Channel A; 2: Channel I (Zero impulse); 1: GND
    I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !) 
    Thanks!
    WLAN

    Unfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
    Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
    Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly.

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • I have a Rs232/Rs485 converter(CV 24).How can I connect it from a rs485 to a rs232 cable?

    I have a RS 485(8 serial outputs) and a motor with a rs232 cable. I don´t have a comunication between the motor and the card...also I have a rs232/rs485 converter. How can I connect the converter to the card. Give me all the possible solutions.

    Hey bubuse,
    First of all make sure your motor is RS232. If you are using one of NI's 8 port RS485 cards (http://sine.ni.com/apps/we/nioc.vp?cid=1846〈=US) it should include a dongle that takes the connector out to individual 9-pin dsub connectors.
    From there, most RS232 cables have 9-pin dsub connectors and the converter should just plug in between the cables. Here is a link that shows the pinouts and voltage differences of both protocols.
    http://www.ni.com/pdf/manuals/371253a.pdf
    However, these devices rarely work well. If your motor is RS232 they I would suggest you purchase a RS232 board. NI has a new line of boards that are extremely fast and easy to use. They can hit custom baud rates and will show up as normal COM ports on your computer.
    In the long run you will have fewer problems.
    http://sine.ni.com/apps/we/nioc.vp?cid=13694〈=US
    I hope this helps out.
    JoshuaP
    National Instruments

  • How can I connect NetBeans 6.1 with SQL Server 2005?

    Hello guys...
    how can i connect NetBeans 6.1 with SQL Server 2005?
    there is no SQL Server in Server list when we create a new Web Project and choose Server.
    I'm new to NetBeans and this is my first time of posting.
    If has some errors and unwanted disturbing,pls understand me. Thanks.
    (If you have references or some snippets, i'll be glad if u can share.)
    scsfdev

    The JDBC-ODBC bridge wasn't recognizing any of the primary keys I had set up in SQL Server. After lots of head banging, here's the solution I came up with:
    1. Download the appropriate driver. SQL Server 2000 requires the SQL Server 2000 JDBC driver (http://www.microsoft.com/downloads/details.aspx?FamilyId=07287B11-0502-461A-B138-2AA54BFDC03A&displaylang=en).
    SQL Server 2005 download: (http://www.microsoft.com/downloads/details.aspx?familyid=C47053EB-3B64-4794-950D-81E1EC91C1BA&displaylang=en)
    3. After installing, right-click on "Libraries" in your project, and choose "Add Library...". Next, give it a name (i.e. SQLServer2000), and select "Class Libraries".
    4. On the next screen, find the JAR files (should be in C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\), and add them under the "Classpath" tab. It will now be available under "Libraries" for future projects.
    5. You can now create a connection to a specific database under the "Services" tab (next to "Projects" and "Files" in the top left of the screen). Select "Microsoft Sql Server 2000 (Microsoft Driver)" and format the "Database URL" like this:
    jdbc:microsoft:sqlserver//YOURSERVER:1433;DatabaseName=YOURDATABASE
    1433 is the default port, though your DBA may have changed it.
    I posted a simpler version of this on the NetBeans.org FAQ page - they had the following title with no content on the answer page:
    "Cannot Select Tables From MsSql 2000 Because It Says No Primary Key Next To Each Table But The Tables DO Have A Primary Key. What Do I Do?"

  • How can I connect Prime PD233C to UMI-7764

    How can I connect Prime PD233C to UMI-7764

    "Please, I have simply to connect a step motor to the UMI-7764 through an PD233C driver.
    Please, could you tell me which outputs of the UMI-7764 do I have to connect to the driver ?
    Thank you."

  • How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

    How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
    This does not have an HDMI port but does have:-
    1) S-Video I/P,
    2) Video I/P,
    3) Audio Input (Left & Right)
    4) Audio In jack (for VGA and DVI source)
    5) DVI input
    6) VGA input

    Welcome to the Apple community.
    The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
    You may well wish to make sure that the DVI connection works before spending any money on a DAC..

  • How can i connect to SQL Server 7.0 on Windons Using JDBC

    How can i connect to Microsoft SQL Server 7.0 on a windows enviroment ?
    in sql server 2000 some jar files are required that is
    What you need to do is actually add all three jar files to your class path individually. There are three jar files that come with this driver the msbase.jar, msutil.jar, and mssqlserver.jar. for sqlQ server 2000.
    now the problem is that i cant find these files on my system. firstly where these files will be located. secondly are they will be used to connect to SQL Server 7.0. thirdly if not what is the procedure.
    My next Problem is that I have Websphere Studio Application Developer. in which their is this facility of Database Webpages its like a wizard which makes automatically beans servlets and JSP but before that you need a Driver Name and and Class Name for to Connect to the Database.
    Can you tell what is the specific Driver Path for the Microsoft SQL Server 7.0 . secondly is this the class which is used to connect to SQL server 7.0 "com.microsoft.jdbc.sqlserver.SQLServerDriver" where can i find this one. for SQL server 7.0.
    please provide some guidance in this regard.

    You can search for the JDBC drivers at, http://industry.java.sun.com/products/jdbc/drivers
    All the three jars that you specified are part of MsSQL Server jdbc driver. You need them (in the classpath) to get connected to the database.
    "com.microsoft.jdbc.sqlserver.SQLServerDriver" is the class in mssqlserver.jar. This is the driver class which will be used to get connected to the database.
    You can search in this forum for writting jdbc code (for Sql Server). If you don't find these jars, give me your e-mail id.
    Sudha

  • How can I connect to SQL Server CE?

    Hi!
    How can I connect to SQL Server CE ?
    Any idea?
    I found jdbc driver for SQL Server 6.5,7.0,2000.
    But no driver for SQL CE.
    Thanks for any suggestion....

    I am also searching for same answer.
    I wanna choose Access as a db. but I can't find that so I have a no choice to select SQL2000CE though.
    I am stuck in driver problem. I can't find that.
    Should I use Oracle Lite or PointBase?
    I am under a lot of stress... like you've been...
    I wish you find and post that....

  • How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

    How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

    You need to find out what video out you have on your iMac, and what kind of video inputs there are on your TV.
    It will help to know exactly what model iMac and exactly what make/model TV you have.
    Depending on the exact model iMac you have, it may have miniVGA, miniDVI, miniDisplayPort or Thunderbolt output.  Your TV may have composite, S-video, component, DVI, VGA or HDMI inputs.  Once you confirm what kind of ports your iMac and TV have, then we can probably suggest the correct cable or adapter so you can connect them to each other.

  • How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    That won't work with the iPad, unless maybe there's a "control monitor" app somewhere.

  • How can I connect my TV sony bravia to Imac for display !

    How can I connect my TV sony bravia to Imac for display ! I did it before but a week ago crash my sistem and been to apple store london to fix it and wend I come home I can not reconnect the tv to imac ! please help !!!!!!!!!!!

    I BUY A CABLE FROM AMAZON.CO.UK AND MY iMAC WAS WORKING WITH THIS CABLE BUT AFTER THEY (APPLE STORE REGENT STREET ) REPARIT NOW IS NOT RECONICE THE DISPLAY !!!!!

  • How can i connect my Imac late 2012 to my Samsung TV??

    How can i connect my Imac late 2012 to my Samsung TV??I have a hdmi cable stuck in my Tv and the other end a adapter from hdmi to mini display port. but it won't work I don't get no picture or sound on my tv

    I have an Apple tv and with this it works of course. But I wanted it to use with Windows 7 so I need to connect my imac to my tv...
    how can i turn it on in the settings? it won't work or recognize my tv

  • I do not have a home wifi setup. How can I connect my iMac to apple TV?

    I do not have a home wifi setup. How can I connect my iMac to apple TV?

    you need a wifi connection, it says on this manual
    http://manuals.info.apple.com/MANUALS/1000/MA1607/en_US/apple_tv_3rd_gen_setup.p df

  • Imac 21" mid 2011 how can i connect my imac to hdmi on my tv?

    imac 21" mid 2011 how can i connect my imac to hdmi on my tv?

    You need to buy this adapter http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng&mco=MTgwOTAzMjI
    http://macs.about.com/od/diyguidesprojects/qt/hdtvconnection.htm

Maybe you are looking for

  • Help! I Can't See My Web Page!

    Good evening fellow Dreamweaver users,     I recently tried centering one of my web pages using a code that I received from Nadia for another one of my pages.  The code worked for that page, but when I entered it into my second page it didn't work. 

  • Localhost not working with firefox 7. How do I get it to work with wampserver

    used to be able to access localhost via wampserver but firefox 7 just shows a blank page??? I looked at control panel->internet properties but local host is set as exception. Running XP Pro OS. Chrome 14 works fine with localhost but not firefox 7. I

  • Is Droid Maxx able to sync Contacts with Facebook

    My old Droid used to sync the photos from FB with my contacts, but I have yet to find a way to make my new replacement phone (Droid Maxx) do that.  Is it no longer posible or am I missing something?

  • Print Jtable with multiline header?

    i want to print jtable with multi-lines header and footer using the print function that takes MessageFormat as header and footer i used MessageFormat header = new MessageFormat("hello\r\nworld");and i used '\n' only but it was printed all in the same

  • Frustrating Snow Leopard Upgrade Causing 'connection timeout'

    WIFI problem no connection due to a connection timeout everytime i try and connect to my home wifi network (wired ethernet ok no problem). There seems no way out from this.  Apart from downgrading back to a usable Leopard installation which I have do