How can I connect the phone network to LYNC Server 2013?
Greetings,
We have a working implementation of Lync Server 2013 (pc to pc), our objective is to connect lync to our phone central, receive and send calls from lync clients (pc, phone, etc), basically enterprise voice services.
I would like to know the following:
Hardware that I need for this beside the server.
Extra configurations that must be done.
If you could recommend me the hardware needed it would be helpful.
You'll need a gateway typically. You can find a list of qualified IP gateways here: http://technet.microsoft.com/en-us/office/dn788945.aspx
I typically lean towards the AudioCodes Mediant line, though many here love Sonus as well. You'll need to pick a method to connect to your PBX before you begin, such as via a T1/E1 trunk, FXO ports, or a SIP trunk depending on what your PBX will
support.
You'll need to configure the PBX to route calls through the T1 towards Lync and vice versa. You'll also need to configure the gateway itself, so I'd go with a consultancy with experience here or purchase remote implementation support from the hardware
manufacturer.
On the Lync side, you'll need to configure dial plans, voice policies, usages, and routes:
http://technet.microsoft.com/en-us/library/gg398272.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
I work in China, therefore, I stay in China for long time. I bought an iPadair and try to connect with iCloud, then asked me security code which is sent to my home phone in New York. I cannot get it. How can I connect the new one with iCloud. My name is David M Lee, have Apple, iCloud and iTune account.
If you are referring to the code for Apple ID two-step verification, you will need access to either one of your trusted devices or your Recovery Key. There is more information in the links below:
Frequently asked questions about two-step verification for Apple ID - Apple Support
Apple ID: Can't sign in with two-step verification - Apple Support -
I am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!
Make sure you have a AirPrint enabled printer.
http://support.apple.com/kb/ht4356 -
How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. ThanksDoes the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
http://support.epson.net/airprint/fw.html
Regards. -
HT1937 How can i changen the phone number on ipad2
How can i change the phone number on my ipad?
Hi this is Dr Shabd
The only and easiest way is
1-Go to Setting - Switch off the Face Time
2-Go to Settig - Switch off the iMessage
3-Go to Setting - General Settings- Reset Network Settings
4 - Go to Setting Switch on FaceTime - Sign in with your existing Apple / iCloud ID
You can see the Mobile number is changed now.
For more queries do write me or Whatsapp me. -
If the on/off button at the top of my iphone stopped working, how can i shutdown the phone and rebot?
Use Assistive Touch. Settings App > General > Accessibility > Assistive Touch > Device > Lock Screen. To turn OFF, hold down on the lock screen until slide to power off appears. To turn ON, connect iPhone to power, charger or USB port of computer.
-
How can I restart the phone?
Updating ios failed and I can not restart my phone, the screen only shows symbol for connecting to iTunes - how can I restart the phone?
Nor iTune or my computer can find the phone when connected to the usbHey there susnil,
It sounds like you have an image on the screen showing to connect the device to your computer with the usb cord but iTunes and the computer are not recognizing the iPhone. According to the following article you should choose one of these articles to help that depedning on your operating system:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
When you can see the device in iTunes, I would follow the same article to help with getting out of Recovery Mode.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently
it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account and in the past syncing was no problem. What setting has changed?The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.
-
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
How can I delete the guest network from my airport. It was not showing up until I recently upgraded the airport. It now says my name's guest network and I don't like my name showing on the available network list! I am using a Verizon wireless modem with the wireless feature off.
Open AirPort Utility, go to the Wireless tab and remove the check from the guest network check box.
-
How can i remove the phone number from the text messages that i receive in the notification center
how can i remove the phone number from the text messages that i receive in the notification center?
You choose whether to see text messages in Notification Center or not. If you elect to see them, they will display the phone number (unless they are from a contact in your contacts list).
You can choose not to see them at Settings > Notification Center > Messages. -
The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?
If the answer to the above question is "yes", FIRST, set up a backup of your new computer before you do anything else so the next time your computer breaks you will not be in the same situation. Backup solutions are numerous and inexpensive, and there is absolutely no excuse in the Third Millennium not to have one.
Then see this tip: https://discussions.apple.com/docs/DOC-3141 -
How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?
How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?
Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret... -
My phone was run over. It still works enough to see some of the screen but not the number pad. I cannot unlock the phone because I activated find my iphone. How can I unlock the phone so I can save my photos? Is there a way to unlock it from find my iphone. It was not backed up in iCloud. When I plug it into my computer, the computer tells me that I have to unlock it first. Help?
No I haven't synced my iPhone with the computer I'm currently using. The computer that I normally sync my iPhone with is being repaired.
I read a nearly identical question to mine (in which you answered) and I found my the answer. Thanks!
Now I have a few more questions: If I mail my broken iPhone to Asurion, will I be able to get my data off of my iPhone once Asurion has it? And what will happen to my old iPhone and the data on it if I activate my replacement iPhone? Will my broken iPhone just become de-activated and will the data be erased or lost or something? Could I still sync it (with the computer ir originally synced with) and back up the data?
Thanks. -
Hi all, I have bought a second hand iphone 5s and have found it is still activated to the last user... i can't get hold of them anymore, how can i get the phone activated in my name?
If iOs 7 is installed on that iPhone, you will not be able to activate it without
the requested information. It is called Activation Lock and is a security
feature built into iOS 7. There is no workaround.
Maybe you are looking for
-
How to get resume event in app?
How to get resume event in app?
-
The question speaks for itself; this just started happening.
-
HP 2110 all in one scanning as PDF
The scanner that I have is a hp deskjet F2110 all-in one. How do I scan and save as a PDF file. The only options that I can find are JPG, BMP, PNJ, TIF. Is it even possable to scan as a PDF file on this scanner?
-
Accessing KM Content using Webdynpro Tree Application
Hi, I want to create a webdynpro tree structure application which pulls out the KM Content into the tree Structure. How can i do that? Where can i give the KM path and make the KM documents reflect in the tree? Does any body have code samples related
-
How to turn off backups? They're adding 5-15 minutes to each sync.
In desperation, I just restored my phone from scratch. It only has 1 ringtone (Audio: 1.4MB) and some applications (Other: 391.1 Megabytes) on it, the rest is empty (Free: 14.26 GB). Yet every sync still takes around 10 minutes. Even if I just take i