How can i connect xbox to time capsule?

Hi, I am (whilst being shouted at by my 11 year old son), trying to connect Xbox 360 to a time capsule. I tried last year without success, and afer chatting with a bloke yesterday in an Apple store, I thought I would try again. No luck. I've tried inputting every set of numbers and address I can find, but the Xbox, just will not connect. Is there a simple set of instructions that will do this? The forums I've looked at have information that is beyond me. The time capsule is connected to a Virgin media modem via ethernet. The Xbox Live connects via ethernet cable to modem just fine. I would just like it to work wirelessly so I don't have to keep plugging the cable back into the time capsule and rebooting. As an alternative is there a piece of kit that would let both the Xbox and the time capsule remain wired up to the modem? There only seems to be one connector however. Many thanks in advance.

Connect an Ethernet cable from a LAN <-> port on the Verizon gateway to the WAN port (circle of dots icon) on the Time Capsule.
Then, temporarily connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule to help AirPort Utility "see" the Time Capsule. Once you have the Time Capsule configured and updated with new settings, you can remove the spare Ethernet cable.
If that is not successful, you will need to perform a Factory Default Reset on the Time Capsule as follows:
Pull the power plug on the Time Capsule
Wait 4-5 minutes
Hold in the reset button on the Time Capsule and while you continue to hold it in, plug the power back to the Time Capsule
Keep holding the reset button for 8-10 seconds before you release it
Wait 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
Restart your Mac, then open AirPort Utility to configure the Time Capsule

Similar Messages

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

How can i connect phone line to capsule

how can i connect phone line to capsule?

The phone line must connect to a modem, then the modem connects to the Time Capsule.

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

I can't connect with the Time Capsule.

Hello everyone,
Some years ago, I bought a Time Capsule. Until now, I didn't want to use it as an extern HD.
So I tried today.
I am using it for a year now, as main router. Several computers and iDevices are using it.
Because I had forgotten some things - and I hadn't wrote it down - I decided to reset it and configure it again.
Since then, the internet has become slower - and I my Macbook pro can't connect to the Time Capsule's disk.
In Finder's everything fine. Left, under 'Shared', I can see the Time Capsule as a HD.
When I click on it, I see: "No Connection". Then I select "Connect As", and I fill in the Time Capsule password.
It tries to connect a few minutes, but then I get the message:
"The backup disk could not be found. Make sure the backup disk is connected or open Time Machine preferences to select a different backup disk."
In the Airport Utility, there's a green light.
*My firmware has the newest updates
*I am using Snow Leopard
*I am using newest update of the Airport Utility
*Since reset, internet's fine but a bit slower.
Other Questions:
*Can I use my Time Capsule for other things than only Time Machine (backup)?
*Can I divide it in parts? (Backup, User)
*Can I backup multiple devices on it? (Macbook Pro, iMac, Macbook Air etc.)
Hope you can help me!
iFallrise

What actual model is the TC.. the A1xxx number from the rubber base mat???
As they age they become unreliable. Some earlier and some at 3year mark.
It greatly depends on the setup of the existing network.
I would recommend a downgrade in the TC firmware.. as with Snow Leopard there is no advantage to you in the later firmware.
Go to the airport utility and select firmware update.. hold down the option key when you make the selection and all the previous versions available for your model will come up. I recommend using 7.5.2
Do another reset of the device. This time a full factory reset.. and start the configuration again.
Ignore update to firmware requests.. turn off the reminder.
Set all names to SMB standard. short, no spaces, pure alphanumeric. TC name, wireless names, hard disk name.
For wireless I recommend you use wpa2 security with 8-12 character passkey.. pure alphanumeric.
Set to manual for radio channels and test 1, 6, 11 in turn for the best.
Depending on the broadband you use, the TC must be in router or bridge mode.. tell us more if you need help for this.
If you think the TC is slowing you down, do a test with direct connection to the broadband modem and give us the speed comparison.. direct and via the TC ethernet or wireless.. tell us which though.. wireless will always be slower than ethernet.
If you have issues still with the hard disk it might need some work.. older models the disk might need to be erased .. please open any time machine backup and run a verify.
A5
http://pondini.org/TM/Troubleshooting.html
Other Questions:
*Can I use my Time Capsule for other things than only Time Machine (backup)?
Yes, but the TC is designed primarily for Time Machine.. if you store files, there is no method in the TC to back up those files.. do not make them the only store.
*Can I divide it in parts? (Backup, User)
You cannot partition a TC .. not without removing the disk. You can create a disk image.
Q3 http://pondini.org/TM/Time_Capsule.html
*Can I backup multiple devices on it? (Macbook Pro, iMac, Macbook Air etc.)
You can use multiple devices with TM. Be aware you need lots of free space for this to be successful. So you need to add up the total you want to backup on each computer.. and at least double it.

How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

Just use the archive utility on the disk page of the airport utility manual setup..
If you have lion and v6 airport utility.. it missed out. On lots of things.
Download and install the real.. UTILITY
5.6 http://support.apple.com/kb/DL1482

How can i clear a full time capsule and start again

how can i clear a full time capsule and start again

Open the airport utility .. Click on the TC.. click on edit and go to the Disks tab.
Click Erase Disk.
Choose quick erase.. it takes 2min to reformat the drive.

Upgraded MobileMe to iCloud and now can't connect to my Time Capsule at home with Back to My Mac

I upgraded my MobileMe account to iCloud yesterday and now I can't connect to my Time Capsule when I am away from my home network. I had been able to using Back to My Mac with my MobileMe account. Now the airport utility still only shows a mobileme option in the advanced settings. Is there an update for the time capsule so that I can input my iCloud information?

Apparently this isn't possible. This was never discussed publicly before the iCloud launch. All that was said was Back to my Mac would continue working. I looked everywhere and couldn't find anything, even after the iCloud launch. Made the switch, my AirPort started yelling at me because of MobileMe credentials. I've been waiting for an AirPort update but have still been digging. Just found this:
http://support.apple.com/kb/HT4867
Talk about a footnote. This should have its own article, not be like, "Oh everything will still work great! ... ... ...
Except for AirPort disk sharing."
I'm not too happy about this.

How can i ensure that the time capsule back up all my data?

how can i ensure that the time capsule back up all my data and no any data missed during the back up? becz i was backing up my mac to time capsule for the first time and it takes only 5 hourse for 279GB which is doesnt make sense
any idea, how to ensure that all my data been backed up

well this tells you why you are having issues.. since you have a filevault and unless you are logged on as that user TM has no way to backup the vault.
so that is why the backup is so small.
And you cannot remove the file vault because the disk is too small.. you are in catch 22..
You cannot backup and you cannot remove the vault..
Login as the user who has the file vault and copy the files off the computer to a directory on the TC.. Then just delete the files on the computer.. that will then allow you to remove the file vault.
But never will I ever use file vaults so I am being theoretical .. please read it up yourself.
http://pondini.org/TM/25.html
You are not doing the background reading you need to understand what you are doing..
read the whole of pondini's info.. or at least skim it so you know what is there.
Avoid like the plague file vaults..
When disks go belly up, as they always do.. your files will be lost. Somewhere they need to be stored in the clear.. so why bother .. put better security on the computer and forget vaults.

How can I do a complete Time Capsule backup on an external USB hard disc with the new AirPort utility V6?

How can I do a complete Time Capsule backup on an external USB hard disc with the new AirPort utility V6?
It was possible in the AirPort utility V5, but in the new V6 I can't find this option.

Download and use 5.6.. the other non-toy version of Apple's Airport Utilities.
http://support.apple.com/kb/DL1482

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
Then use a screwdriver to remove the 10-12 screws to open up the case.

Can I connect and use Time Capsule with two printers?

Can I connect and use Time Capsule with two printers?

Sure, if the printers connect using the Ethernet port, you have 3 ports on the Time Capsule.
If the printers connect using wireless only, the Time Capsule will support up to 50 connections.
If your printers connect using USB, then you will need a powered USB hub. Something like this, for example:
Dynex 4Port USB 2.0 Hub DX-THUB16 - Best Buy

How do I connect an old Time Capsule to look for data from a previous OS?

Hello. I replaced my old Time Capsule with a new one a few months ago, and broke in the new Time Capsule with a fresh backup of a clean 10.9 install after migrating my user account.
Today, I noticed that there were some folders full of personal data that are neither on my MBP, nor in my Time Machine backups on the new Time Capsule. I am hoping that these folders still exist on my old Time Capsule which I used with 10.8.
I'm wondering how to search through my old Time Capsule and its Time Machine backups. Specifically, I'm wondering how to connect it to my MacBook Pro, and whether I will be able to search for my (hopefully not) lost data through the Time Machine interface, or through the directory structure contained in Backups.backupdb.
Can anyone help me out with a plan to proceed?
Thank you very much.

1. Turn off Time Machine in System Preferences
2. Unplug new Time Capsule
3. Turn off Wi-Fi in the menu bar
4. Attach old Time Capsule to power
5. Attach old Time Capsule to MBP via ethernet
6. Wait for old Time Capsule to appear in Finder > Sidebar > Shared
7. Select old Time Capsule in Finder > Sidebar > Shared and Connect to old Time Capsule
8. Select the Data directory
9. Double-click on the .sparsebundle file that represents the volume that was backed up on the old Time Capsule
10. Hold down the option key and click on the Time Machine icon in the menu bar and select Browse Other Backup Disks...
11. Select the Time Machine backup disk you would like to browse and choose Use Selected Disk
12. Browse old Time Capsule backup in Time Machine environment, restore data as normal, exit Time Machine as normal
13. Eject old Time Machine backups (the .sparsebundle you mounted) under Devices in Finder > Sidebar
14. Eject old Time Capsule under Finder > Sidebar > Shared
15. Disconnect ethernet; disconnect old Time Capsule from power.
16. Plug in new Time Capsule (it boots); turn Wi-Fi on (reconnect to network, if necessary); turn Time Machine back on in System Preferences

How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
Thanks!

The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

Can I connect to my Time Capsule from any where via the internet ?

I want to be able to connect to my Time Capsule when I'm on the road. How can I do so?

Do a google for remote time capsule connection.
Yes, it is very easy using a Mac if you have static public IP and the TC is the main router.
It can be done via iCloud and BTMM.. again just look it up.
It is very very hard to do it without iCloud Lion and latest TC firmware or static IP.
It should be accessed by AFP.. means no windows machines.
It should be considered carefully as there are some risks.. passwords my not be exchanged encrypted..
The right way is vpn using a vpn router and TC in bridge.

How can i connect xbox to time capsule?

Similar Messages

Maybe you are looking for