How can I control a FLV video using the main play bar (not the FLV skin)?

I need to have the ability to play/pause an FLV video in a slide with the main play bar. Research has shown me that in previous versions, there was a "synchronize with project" checkbox that enabled this. I cannot find this in version 8. Is there a different way of doing this?

Hello ,
Welcome to Adobe Forums
Try inserting the video as Multi-Slide Synchronized Video instead of Event Video ,
Then down below there will be an option to Distribute the video across the slides and you can select from Slide n to n ,(Where n is your slide number).
Hope this will serve your need.
Regards
Himanshu

Similar Messages

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
I store my PSD files adjacent to the original RAW file from which it was derived.
If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
How can I control which Photoshop will open a file I select when opening it through Bridge?.

Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

I want to download an audiobook, but my daughter has a giftcard credit on the account. How can I download my audiobook without using the money from her giftcard?

I want to download an audiobook, but my daughter has a gift card on the account. How can I download my audiobook without using the money from her gift card?

go directly to your ibook app. and you're going to find it. it's only with ibooks app.
best
Olivier
<Edited by Host>

How can i plot a histogram with using the results of Line Length

PLS HELP.How can i prepare a histogram with using the results of line length code(It is somewhere in the middle).
This is a final exam take-home question. I would appreciate if you can help?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.text.*;
import java.io.File;
public class WordAnalyser extends JFrame implements ActionListener
private JMenuItem jmiAc, jmiSil, jmiCikis, jmiAnaliz, jmiHakkinda, jmiKullanim;
private JTextArea jta1, jta2;
private JFileChooser jFileChooser = new JFileChooser();
File hafizada;
File aktarilan = new File("Sonuc.txt");
// Main method
public static void main(String[] args)
WordAnalyser frame = new WordAnalyser(); /* Ana ekran olusturulur */
frame.setSize(400, 300); /* Degerleri belirlenir */
frame.setVisible(true); /* Gorunebilirligi ayarlanir */
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public WordAnalyser()
setTitle("Serkan Ozgen Dosya Inceleme Programina Hos Geldiniz");
JMenuBar mb = new JMenuBar();
setJMenuBar(mb);
JMenu fileMenu = new JMenu("Dosya");
fileMenu.setMnemonic('F');
mb.add(fileMenu);
JMenu helpMenu = new JMenu("Degerlendirme");
helpMenu.setMnemonic('H');
mb.add(helpMenu);
JMenu kullanimMenu = new JMenu("Kullanim Kilavuzu");
mb.add(kullanimMenu);
fileMenu.add(jmiAc = new JMenuItem("Ac", 'A'));
fileMenu.add(jmiSil = new JMenuItem("Sil", 'S'));
fileMenu.add(jmiCikis = new JMenuItem("Cikis", 'C'));
helpMenu.add(jmiAnaliz = new JMenuItem("Analiz", 'D'));
helpMenu.add(jmiHakkinda = new JMenuItem("Hakkinda", 'H'));
kullanimMenu.add(jmiKullanim = new JMenuItem("Kullanim"));
getContentPane().add(new JScrollPane(jta1 = new JTextArea()), BorderLayout.CENTER);
getContentPane().add(jta2 = new JTextArea(), BorderLayout.SOUTH);
jmiAc.addActionListener(this);
jmiSil.addActionListener(this);
jmiCikis.addActionListener(this);
jmiAnaliz.addActionListener(this);
jmiHakkinda.addActionListener(this);
jmiKullanim.addActionListener(this);
public void actionPerformed(ActionEvent e)
String actionCommand = e.getActionCommand();
if (e.getSource() instanceof JMenuItem)
if ("Ac".equals(actionCommand))
Ac();
else if ("Sil".equals(actionCommand))
Sil();
else if ("Cikis".equals(actionCommand))
System.exit(0);
else if ("Analiz".equals(actionCommand))
sayim();
else if ("Hakkinda".equals(actionCommand))
JOptionPane.showMessageDialog(this,
"!!!! Bu program text analizi gerceklestirir. Her hakki saklidir SERKAN OZGEN!!!!",
"Bu program hakkinda",
JOptionPane.INFORMATION_MESSAGE);
else if ("Kullanim".equals(actionCommand))
     JOptionPane.showMessageDialog(this,
     " Ilk once dosya menusunden Ac i tiklayarak analiz etmek istediginiz Dosyayi seciniz (Lutfen uzantisi *.txt \nveya *.log olsun). Daha sonra Degerlendirme menusunden analizi tiklarsaniz dosyanizda kac adet rakam, harf, \ncumle ve kelime oldugunu gorebilirsiniz. Simdiden kolay gelsin",
     "Programin kullanim detaylari",
     JOptionPane.INFORMATION_MESSAGE);
private void Ac()
if (jFileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION)
hafizada = jFileChooser.getSelectedFile();
Ac(hafizada);
// Acilan Dosyayi ana ekranda gostermeye yariyan bir method
private void Ac(File file)
try
// Acilan dosyayi okuma ve ana ekranda gosterme
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta1.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
// Temizle tusunun hangi ekranlara etki edecegini secme
private void Sil()
jta1.setText("");
jta2.setText("");
private void sayim()
int buff;
int sayac = 0;
int Cumleler = 0;
int Kelimeler = 0;
int Karakterler = 0;
int Satirlar = 0;
int Rakamlar = 0;
boolean start = true;
int linenum = 0;
try
FileInputStream instream = new FileInputStream(hafizada);
FileOutputStream outstream = new FileOutputStream(aktarilan);
     BufferedReader infile = new BufferedReader(new InputStreamReader(new FileInputStream(hafizada)));
PrintStream out = new PrintStream(outstream);
     out.println("---Kelime Avcisinin Sonuclari---");
     String line = infile.readLine();
     while (line != null){
     int len = line.length();
     linenum++;
     line = infile.readLine();
     out.println("Line Length :"     + linenum + "\t" +len);
while ((buff=instream.read()) != -1)
switch((char)buff)
case '?': case '.': case '!': /* Eger "?", "." veya "!" gorurse program cumleleri ve kelimeleri arttirir*/
if (start == false)
Cumleler++;
Kelimeler++;
start = true;
break;
case ' ': case '\t': case ',': case ';': case ':': case'\"': case'\'': /* Eger /t,;:\ ve \" bu isarteleri goruruse program kelimeleri arttirir */
if (start == false)
Kelimeler++;
start = true;
break;
          case 'n': case '\n': /* Eger \n gorurse satirlari arttirir */
          if (start == false)
               Satirlar++;
               Kelimeler++;
               start = true;
          break;
default:
if (((char)buff >= 'a' && (char)buff<='z')|| /*a-z, A-Z veya - degerlerini gorurse karakterler arttirilir */
((char)buff >= 'A' && (char)buff<='Z')||
((char)buff == '-'))
Karakterler++;
if ((Kelimeler % 50) == 49)
if (start == true)
               out.println();
out.print((Kelimeler+1) + " ");
out.print((char)buff);
start = false;
          if ((char)buff >='0' && (char)buff <='9') { /* 0-9 gorurse rakamlari arttiri */
               Rakamlar++; }
}// switch
     }//while
instream.close();
out.println();
out.println();
out.println("Karakter sayisi: " + Karakterler);
     out.println("Kelime sayisi: " + Kelimeler);
out.println("Cumle sayisi: " + Cumleler);
     out.println("Satir sayisi: "+ Satirlar);
     out.println("Rakam sayisi: "+ Rakamlar);
outstream.close();
try
BufferedInputStream in = new BufferedInputStream(new FileInputStream(aktarilan));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta2.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
catch (Exception e)
System.out.println(e);
}

Why is it that you're not interested in IOExceptions?
catch (IOException ex)
} Empty catch blocks is a hallmark of foolish Java code. At least print out the stack trace.
%

How can I connect personal hotspot to use the internet from my phone on my laptop?

I do not have internet at home and want to be able to connect using the personal hotspot on my phone. How do i do this??

How much would be a month?
       From: Verizon Wireless Customer Support <[email protected]>
To: kelly johnson <[email protected]>
Sent: Wednesday, October 8, 2014 12:02 PM
Subject: - How can I connect personal hotspot to use the internet from my phone on my laptop?
#yiv3595356488 img
|
|
|
A message from the Verizon Wireless Community
|
|   |
How can I connect personal hotspot to use the internet from my phone on my laptop?
created by Verizon Wireless Customer Support in iPhone 4S - View the full discussion             Hello kmj65
Thanks for replying. The plan you have it would be an additional charge to add the hotspot feature. It's not free with the Nationwide plan. You would need to add the feature online at www.verizonwireless.com/myverizon
JoeL_VZW
Follow us on Twitter @VZWSupport   Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in iPhone 4S by email or at Verizon Wireless Community
|
|
© 2014 Verizon Wireless
Verizon Wireless
One Verizon Way
Mail Code: 180WVB
Basking Ridge, NJ 07920
Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
|
We respect your privacy. Please review our privacy policy for more information
about click activity with Verizon Wireless and links included in this email.
|
|
|

How do I turn off suggested videos using the YouTube widget?

How do I turn off suggested videos using the YouTube widget?

That's not currently an option in the Muse youtube widget.
We'll add support for that option in a future release of Muse.

In iPhoto, how can I find a particular event using the search function?, In iPhoto, how can I find a particular event using the search function?

In iPhoto, how can I find a particular event using the search function?

NO - read my last answer over a year ago
That is because iPhoto is all about photos - not about files
You do not access the piles in iphoto - you access the photos using either iPhoto or the media browser - see this user tip for photo access details
LN

Updating PS CC 2014--how can I tell if I am using the latest version?

I just updated Bridge, PS and LR from the Creative Cloud, but when I went to use them, I was still using the old versions despite the fact that CC said I had updated to the latest versions. A thread in the LR forum led me to sign out and back into Creative Cloud, and that did the trick for LR. However, I cannot discern any changes in PS. How can I tell if I am using the latest version of PS? When I click on About Photoshop, the popup says:
TIA.

that's the latest ps as of today.

How can i delete or clear video from the youtube most viewed?

How can I delete or clear video from the youtube of "most viewed?"

The 'most viewed' can't be edited - it is the videos on YouTube that have been watched most, so apart from the video being taken down from YouTube, or other videos getting more viewings, they will remain in that list.

How can I control a LabView VI using a C++ script/program?

Hi,
I am a developer of a satellite communications system that is being used in
a satellite project I am working on at the University of Colorado - Boulder.
The project is called 3CS. We have built a simple LabView program that uses
some of the server routines to transfer data via TCP/IP protocol. The basic
VI initializes the radio hardware at the site the satellite is currently
over and then opens a data stream. The data is then downloaded back to our
servers via secure VPN. My question is this: How can I control a VI using
a language like C++ to execute certain parts of the VI. I basically have a
VI that listens for radio packets. My program then strips off the satellite
radio ID and protocol information
. I need to get this information into the
VI remotely through a C++ script. Any help would be greatly appreciated.
Sincerely,
Ryan R. Fligg
Colorado Space Grant College
Electrical and Computer Engineering
University of Colorado - Boulder

Hello fellow Boulderite,
The easiest way would probably be to use the application builder to create a DLL from the VI. The other option is to use the LabVIEW ActiveX interface. There are some examples of using C++ to control LabVIEW in the example library of the NI Developer Zone.

HT201317 How can I see and upload video using my iTV?

How can I upload or view videos from my PC on m iTV?

If you have Apple TV, you might want to post your question over in th Apple TV forum: https://discussions.apple.com/community/appletv/appletv?view=discussions.

How to add a mute button without using the default skin?

I want to use a mute/unmute button for my current project which does not use the default skin. I searched the web and found the following solution.
http://kb2.adobe.com/cps/163/2ed9f163.html
I followed the instruction and it works fine on single slide. The problem is that it does not carry through the whole project. If I mute the first slide, the audio is on again on the next slide. My mute/unmute setting doesn't go to the next slide.
Any one have a solution to this problem? Any help or tips are greatly appreciated.

Hi there
Did you pay close attention to step 4?
Click image to see larger...
Addtionally, your post reads as if you feel the mute button is only avaliable with the Default playback control set. Note that there are all sorts of options with the supplied playback controls that offer enabling a mute button.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How can i control a solenoid valve using time as an input?

i am trying to control 4 solenoids using labVIEW 8.2.1 and a DAQ 9172 box.I want to control the time period that the valve is on as well as the number of times certain valves are on.

Also, what cards are you using? Is the solenoid controlled by an analog voltage? analog current? or digital voltage? It seems to me that you would need something like the NI 9263 AO card to control the solenoid position.
Like Mike said, it is important to know what sort of time period you're trying to use. You can use the operating system time in LabVIEW to determine what value you will output to your solenoid using something like Time Elapsed VI. If the time periods you are looking to control with are too small you won't really be able to achieve that kind of control with a 9172, you may need to look into using a cRIO chassis instead that has hardware timed control.
Chris W

How can I control a FLV video using the main play bar (not the FLV skin)?

Similar Messages

Maybe you are looking for