How can I control paper tray selection from within a report?

Hello everybody
I need to print out a report (preferably in the PDF format) in which certain pages need a specific paper. I am therefore looking for a way to control the paper tray on per page basis. It seems hard to do even though there must be thousand of people out there with the same need - or please proof me wrong
I really appreciate any suggestions.
Regards from Zurich, Switzerland
Peter Buchmann

doesn't support it right now. it will figure it out what tray if the paper is a different size but that's about it. you have two options, have two printers or no preprinted stationary. Most companies go with two printers.
Good luck,
Ike

Similar Messages

Paper Tray designation from within the report

We are running XMLP 5.6.3 from within Oracle Apps.
Is there a way to designate a paper tray from withing the report?
We have the requirement for AP Check to print first page to Tray #1 and then all the following pages to Tray #2. Since we have different Header on the first page I was hoping I can insert some printer codes within to instruct the printer to get the paper from the correct tray.

doesn't support it right now. it will figure it out what tray if the paper is a different size but that's about it. you have two options, have two printers or no preprinted stationary. Most companies go with two printers.
Good luck,
Ike

How can I force any new selection from bookmark to open in a new frame ?

How can I force any new selection from bookmarks to open in a new frame ?

Sorry I would like it happen as a preference,
automate the option like
"Always open in new tab when click Bookmark "
(not over the actual tab)
thanks

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!

Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses ****

I lost my remote control,how can i control my apple tv from my ipad

How can i control my appletv from an ipad

Try. Apple's Remote App.
Remote on the App Store on iTunes

How can I control an iPad screen from a Mac

I have a friend who needs help using her iPad. She lives 1500 miles away. Is there any way I can control her iPad remotely from my iMac?

"Control" would be ideal, so I could take complete control of her iPad and then show her how to do things as if I was sitting there. Think "Remote Access".
But "Share" would be almost as good. At least then I could see her screen and be on the phone explaining what to do and watching her cursor movements.
The way we try to do it now is she holds up her iPad during an iChat (video) session, but the screen is too hard to see to be of any use, and helping her this way is virtually impossible.

How can i control the DAQ directly from VB

Actually, it is my first trial to use Visual Basic to get signal from DAQ.
And i don't how to interface them. I have read an article to use DataSocket.
However, it demostrated the OPC demo in OPC sever only, and so i didn't know
how to get the signal directly from DAQ card to monitor the real-time
signal.
Also, i have tried to build a .dll from my VI file which is used to monitor
the DAQ signal. However, the .dll file didn't have any return value or
argument, did it mean i can use this method?
And how can i interface the DAQ using VB?and my ADC model is AT-MIO-16E-2!
Thank you very much

Hi Sen,
Are you using Measurement Studio ? If so then you can use the DAQ activeX controls.
If not and you are using VB directly, then NI-Daq installs with examples for visual basic ( if you chose the option while installing- if not do a custom install and choose VB support). If so then you should find them under Program Files ->National Isntruments->NI-DAQ->Examples->VisualBasic. These may help you.
Essentially NI-DAQ ships with a .bas file that contains the "declares" for the NI-DAQ dll functions. These files should be in
Program Files ->National Isntruments->NI-DAQ->Includes (look for the .bas files) You can add these to your project to get access to the DAQ functions..
On the second question, do you mean you are using labVIEW to create your dll ? If this
is the case, then when you create your dll (in labVIEW's applciation builder) you have to set the parameters for the function (VI) and also the VI's return values. This will ensure that you can make use of your VI ..If you don't set a return value you really can't use it...Once you set the return value ,and create a dll, then you can use it like any other dll in Visual basic.
Hope this helps...
This link may help you
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/5052ad60f1accc3d862568a100717fd1?OpenDocument
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

How Can I Control a Windows PC from Apple Remote Desktop Please?

Hello Everybody
Please excuse my bad English.
I would like to ask you, how could be possibile setup windows pc (XP or 7) to be controlled by a Mac with Apple Remote Desktop 3.7.2
I think I have to use VNC, but how can i SETUP to connect XP or 7 to my Mac Apple Remote Desktop in the same LAN?
Thanks a lot
Giovanni

You can use ARD to remote control a windows machines, ARD is built on VNC
You'll have to install a VNC server on the windows machine you want to access
You won't be able to use most of the ARD features as they are specific to mac
You'll be be able to see and control the desktop and that's about it
You can also find VNC /Remote Desktop apps in the iOS store that will allow remote desktop connection from iPad /iPhone,
There is a mac version of Microsoft remote desktop in the Mac App Store

How can I control a base ACCESS from labview ?

Hi,
I'm working on a projet on labview and ACCESS and I want to say how can I do to control a database from labview ???
Thanks in advance
Cordially,
Hasna

On Tue, 9 Jul 2002 02:50:12 -0700 (PDT), kiki wrote:
>could you give me more informations about Database Connectivity
>Toolset ???
>
>I notice that we can write data in excel file thanks to an ActiveX but
>is it possible with a table ACCESS ??
DCT it's a suite of VIs (I think Optionals) the contains anything you
need to connect to to a DB.
I used them with access... since I'm not really happy with performance
(read/write max 50 records/sec) it's quite quick to develop
applications that read/write DB.
(Write a Cluster it's trivial.... plug the cluster, prepare a table
with fields of the same type and the same order, yo've did it)
I think you can also use ActiveX, but I've never did.

How can you export a clip selection from FCPX to motion? Round tripping?

How do you export a clip selection out of FCP into Motion? In Motion, you have the option of exporting a selection out of motion? I don't understand why FCPX does not have this functionality. I do not want to export an effect or transition. FCPX is good, but it looks like the application team have no clue about workflows. Especially integration between FCP and Motion.

Not sure if you are asking a question or having a rant .. also not sure what your point is about it being 2013 ? Roundtripping is not in these apps .. sold for very little (relative to FCS which did roundtripping) and most of the functionality used daily from Motion is now in FCPX in one way or another. Perhaps it would be a 'handy' but to highlight this as some BIG deal is a tad missing the point ... .
What exactly is it you cannot do in FCPX and need to send to Motion to work on ?
These may help you with the basics of new compound clips ...
http://play.macprovideo.com/finalcutprox103-editing-in-the-magnetic-timeline/1
http://www.youtube.com/watch?v=lZdjTtF8Qqo
Jim

How can I execute an external program from within a button's event handler?

I am using Tomcat ApacheTomcat 6.0.16 with Netbeans 6.1 (with the latest JDK/J2EE)
I need to execute external programs from an event handler for a button on a JSF page (the program is compiled, and extremely fast compared both to plain java and especially stored procedures written in SQL).
I tried what I'd do in a standalone program (as shown in the appended code), but it didn't work. Instead I received text saying the program couldn't be found. This error message comes even if I try the Windows command "dir". I thought with 'dir' I'd at least get the contents of the current working directory. :-(
I can probably get by with cgi on Apache's httpd server (or, I understand tomcat supports cgi, but I have yet to get that to work either), but whatever I do I need to be able to do it from within the button's event handler. And if I resort to cgi, I must be able to maintain session jumping from one server to the other and back.
So, then, how can I do this?
Thanks
Ted
NB: The programs that I need to run do NOT take input from the user. Rather, my code in the web application processes user selections from selection controls, and a couple field controls, sanitizes the inoputs and places clean, safe data in a MySQL database, and then the external program I need to run gets safe data from the database, does some heavy duty number crunching, and puts the output data into the database. They are well insulated from mischeif.
NB: In the following array_function_test.pl was placed in the same folder as the web application's jsp pages, (and I'd tried WEB-INF - with the same result), and I DID see the file in the application's war file.
        try {
            java.lang.ProcessBuilder pn = new java.lang.ProcessBuilder("array_function_test.pl");
            //pn.directory(new java.io.File("K:\\work"));
            java.lang.Process pr = pn.start();
            java.io.BufferedInputStream bis = (java.io.BufferedInputStream)pr.getInputStream();
            String tmp = new String("");
            byte b[] = new byte[1000];
            int i = 0;
            while (i != -1) {
                bis.read(b);
                tmp += new String(b);
            getSelectionsDisplayTextArea().setText(getSelectionsDisplayTextArea().getText() + "\n\n" + tmp);
        } catch (java.io.IOException ex) {
            getSelectionsDisplayTextArea().setText(getSelectionsDisplayTextArea().getText() + "\n\n" + ex.getMessage());
        }

Hi Fonsi!
One way to execute an external program is to use the System Exec.vi. You find it in the functions pallet under Communication.
/Thomas

How can I call a LabVIEW executable from within another LabVIEW executable?

I have a customer requirement for two LabVIEW executables. Based on their current setup, they need to run executable "A" or "B", both of which are under independent revision control. I have created a third "selection" executable that allows the operator to choose between one of the two, but I am receiving errors when I attempt to call a LabVIEW executable from within a LabVIEW executable using either the "System exec" VI or the "Run Application" VI. If I call a non-LabVIEW executable (such as Windows Explorer) everything works fine.

> I have a customer requirement for two LabVIEW executables. Based on
> their current setup, they need to run executable "A" or "B", both of
> which are under independent revision control. I have created a third
> "selection" executable that allows the operator to choose between one
> of the two, but I am receiving errors when I attempt to call a LabVIEW
> executable from within a LabVIEW executable using either the "System
> exec" VI or the "Run Application" VI. If I call a non-LabVIEW
> executable (such as Windows Explorer) everything works fine.
As with the other poster, I suspect a path problem. You might try the
path out in a shell window, and if it works, copy the complete absolute
path to LV to see if that works. LV is basically passing the comma
nd to
the OS and doesn't even know what is in it, so you should be able to get
it to work.
The other poster commented on subpanels, which is a good suggestion, but
without going to LV7, an EXE can have open more than one VI. You can
use the VI Server and the Run method to fire up another top-level VI.
The decision is whether you want both to be in unique processes.
Greg McKaskle

How can I control external MIDI devices from my PXI Real-time system?

I am trying to implement a psychoacoustic experiment using an external MIDI device that can be used to shift the pitch of a speaker's voice.
I have a 8176 controller in a 1002 chasis with the 6052E IO card. I would very much prefer to run the system in real-time mode (rather than win XP), and need to control the MIDI device through one of the interfaces on the controller.
Any suggestions?
Thanks in advance,
Frenk

Hi Frenk,
one way would be an analogue to MIDI converter.
There are some out there (ask for music equipment)which can convert an analogue signal to some MIDI controller signal. This way you could control the pitch shift with an analogue output of the 6052 in realtime.
Hope this helps
Regards
Stephan

How can you control the export types from DHTML output?

I am currently using the JRC from CR4E V1 patch 7.
When I generate a report as DHTML and use the export button I am presented with 5 export options:
Crystal Reports
Adobe Acrobat
Microsoft Word - Editable
Rich Text Format
Comma Separated Values
I would like to control which of the 5 options are presented to the user. I was looking in the crystalreportviewers115 folder for some JavaScript that could be edited. I found export.js which appeared to have code that was creating the choices for a dropdown (getFormatDropdownList()), however this code did not get executed when I ran the export.
Any help would be appreciated.
Thanks,
Richard

Yes - the JavaScript that's in export.js was rolled into inline code in the Java jar files sometime during version 11.5.
It's no longer customizable.
An option is to use HTTP Filter on your Java Web App to modify the outgoing JavaScript instream, but that's never a pretty solution.
Sincerely,
Ted Ueda

How can I call a java class from within my program?

I was wondering if there's a platform independent way to call a java class from my program.

Here's my scenario. I'm working on a platform independent, feature rich, object-oriented command prompt program. The way I'm designing it is that users can drop classes they write into my bin directory and gain access to the class through my program. For example, they drop a class named Network.class in the bin directory. They would type Network network at my command prompt and gain access to all the methods available in that class. They can then type system.echo network.ipaddress() at my prompt and get the system's ip address. I have it designed that there's a server running in the background and the clients connect to my port. Once connected the end-user can enter their user name and password and gain access to the system. When they type a command they actually call another java program which connects to my server using a seperate thread. They can then communicate back and forth. I have it set that everything has a process id and it's used to keep track of who called what program. Once the program is done it disconnects and closes. Rather than getting into the nitty gritty (I didn't want to get into heavy detail, I know how everything will work) I'm really interested in finding out how I can call a java program from my program. I don't want it to be part of the app in any way.

How can I control paper tray selection from within a report?

Similar Messages

Maybe you are looking for