How can I control printing highlighted part of a page?

I have a problem with a new computer on which I can not print highlighted part of a page. When I try the highlighted part is not printed. If I use my old computer the highlighted part is printed as expected. I have compared the settings for both the printer and Firefox on both computers, but do not see any difference. Both runs Win7, runs on the same network and use the same printer. Only difference I can think of is that the new is a 64 bit computer. Any ideas of how I can solve my problem?

Hi 16tons,
The issue you are referring to might be a known bug. You should look at CWW's post in this thread:
https://support.mozilla.org/en-US/questions/923294
A fix is planned for the next Firefox update.
Hopefully this helps!

Similar Messages

Hyperlinks, how can I zoom in on part of a page on a pdf.

I have made a 12 page pdf with hyperlinks in Indesign. The contents page has 2 links to a page.
The 1st link is to the page as a whole and it jumps to the whole page and thats ok..
The 2nd link refers to a small paragraph on the same page but jumps to the whole page.
Both links do exactly the same thing. So whats the point in 2 links?
How can I make the 2nd hyperlink zoom in on the small paragraph of type only?
Please help
Frank

I don't think there is a way to assign a zoom view for a link within Indesign. In Acrobat, you can assign a page view that zooms in on a specific area.
Here is a suggestion. Instead of two links that goes to the same page, use only one. When the user is on this particular page, create a rollover that is a zoom in view of the paragraph.

How can I control print quantities from the main browser?

So here's the workflow question
I want to select photos to print but I want to print a different quantity depending on criteria. The photos may be in different albums, etc..
Selecting them all and trying to set the quantity in the Print Order window is painfully awkward.
What I really need to be able to do is browse my photos and assign a value to them where the value represents the number of prints that should be created for that photo.
For example, I can assign those colored lables quite easily by just pressing CMD-1, CMD-2, CMD3, and so forth.
So lets suppose I navigate around my photo collection and I assign a color to particular photos where the number of the color represents the desired quantity.
It's very easy then to create a smart album that just shows the photos that have been tagged this way.
However, there is no way then to order prints in one go with the appropriate quantities (other than the manual mechanism in Print Order window) and if I order them as separate groups, I have to pay shipping costs multiple times.
I'm wondering if someone has created an automation script that can use the color (or some other textual tag) that can then be used to submit a print order with the quantities of each photo derived from that color or textual tag?
I hope this question makes sense, it feels awkward to describe.

If you have an iPhone, you can go to the app store and get Keynote Remote for free. The trick to make it work smoothly is to first establish your Macbook Air as wireless network. Then you use your iPhone to control the slideshow remotely, by swiping from slide to slide -- even from quite a distance.
Turn on your Macbook Air's airport (wi-fi), then select Create Network.
Once your Macbook Air is turned on as a network, open Keynote on your computer and your slideshow, but don't start the "view slideshow" mode just yet.
Open up Keynote Remote and if it doesn't connect automatically to your Macbook Air then select the network in Options.
Then start your slideshow from your iPhone -- you will notice each slide appearing on your iPhone as a reference.
If you still have difficulties linking, go into the Keynote preferences menu on your computer and make adjustments in the tab Remote. (And don't be fooled by the Bluetooth option -- strangely at this point it doesn't work between the iPhone and the Macbook -- only wireless.)
*Extra: You can enable "speaker notes" to show up on your iPhone below the picture of the slide.

How can i control the timings of my slideshow using iphoto on my ipad

Q: 1 how can i control the timings of my pupil's slideshows using iPhoto on the iPad?
Q: 2 then how can i export them?
Q: 3 how can i combine them from 8 individual slideshows to 1 for showing to their parents at an assembly?
many thanks in anticipation of your collective help
brian

Here's my take on the same thing:
Short answer: the dpi is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

How can I control a LabView VI using a C++ script/program?

Hi,
I am a developer of a satellite communications system that is being used in
a satellite project I am working on at the University of Colorado - Boulder.
The project is called 3CS. We have built a simple LabView program that uses
some of the server routines to transfer data via TCP/IP protocol. The basic
VI initializes the radio hardware at the site the satellite is currently
over and then opens a data stream. The data is then downloaded back to our
servers via secure VPN. My question is this: How can I control a VI using
a language like C++ to execute certain parts of the VI. I basically have a
VI that listens for radio packets. My program then strips off the satellite
radio ID and protocol information
. I need to get this information into the
VI remotely through a C++ script. Any help would be greatly appreciated.
Sincerely,
Ryan R. Fligg
Colorado Space Grant College
Electrical and Computer Engineering
University of Colorado - Boulder

Hello fellow Boulderite,
The easiest way would probably be to use the application builder to create a DLL from the VI. The other option is to use the LabVIEW ActiveX interface. There are some examples of using C++ to control LabVIEW in the example library of the NI Developer Zone.

HT1893 How can I still print using a 'hp designjet 120nr (C7791B)' with OS X 10.8.3?

How can I still print using a 'hp designjet 120nr (C7791B)' with OS X 10.8.3? I cannot get the drivers to work?

bdmorgan wrote:
Thank you once again Matthew. I understand the importance of being thourough and followed your instruction exactly. I really thought that this would solve it and was ready to click 'This solved my question'. However I still have the same print options as before, no 'A1 on the roll'.
Although, when I copied:
'sudo pkgutil --forget org.linuxprinting.foomatic-rip'
into Terminal it did say somehting along the lines of 'nothing found' (sorry I didnt copy the text). Could this be part of the issue?
In this case the instructions were incorrect. I forgot that the uninstaller would run that command. The reason for that command was to let the system know that foomatic-rip 4.0.6 had been removed. I am sure that you were able to then install foomatic-rip version 3.43.2.15. There are two ways to confirm that the older version is now installed. First, if you can print at all, it is present. You could also copy and paste the following command in the Terminal. It should respond with the version that is installed:
pkgutil --pkg-info org.linuxprinting.foomatic-rip | grep version
Do I need to change the PPD at all?
There is no need to change the PPD. PPDs are reflective of the software (drivers) that are called from the PPD. You can put anything you want in the PPD. If that capability is not in the driver, having it in the PPD won't make it work.
Setting a job to print from A1 Roll Paper is a two step process. First you select the Paper Size which is A1.
Then look under the pop up menu below Paper Size for an item called Paper Feed.
Select Paper Feed. Then you will be able to select where/how the paper is being fed to the printer. This is where you can choose Roll Paper (Cut) or Roll Paper (No Cut) among other choices.
Other drivers may have A1 Roll Paper listed under Paper Size. Perhaps that is how the HP driver was. There would still have had to be a place, then to check whether or not you wanted the paper to be cut and/or whether you were feeding sheets of paper from one of the other paths.
Let us know if you can find all the options now and that you are able to keep your normal workflow.

How can i poster print using my officejet pro 8600plus? my 8500 had this feature.

how can i poster print using my officejet pro 8600plus? my 8500 had this feature.
This question was solved.
View Solution.

Yes, the Officejet 8500 driver works with full capability on the Officejet 8600.
You do not delete the 8600 port, you just right click on the Officejet 8600, select Printer Properties, Ports and just find which port the 8600 is using. After you write this down click Cancel to exit this part. I would suggest you leave the Officejet 8600 driver installed, you can install the version with the Officejet 8500 driver and just select the printer you want at print time.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

MultipartRequest, how can I control this?

Hi Everybody, I'm building a web page in Jsp, and in this the user can send to the server a file (a picture). The file arrive to the server thanks to 'MultipartRequest'. This is the code:
File newDir = new File(Dir);
newDir.mkdir();
MultipartRequest multi = null;
try
multi = new MultipartRequest(request, Dir, 90000);
catch (IOException e){ }
My question is, how can I control, that the file is not a virus or its lenght is too much?
Thanks for all

Hi, I believe you are using the com.oreilly.servlet package.
If so you probably also have the com.oreilly.servlet.multipart package too.
So you could try to use the MultipartParser class which I believe it's better to handle MultipartRequests.
The constructor is MultipartParser(request,size), and then you have a readNextPart() method. Then you can check if this part is a FilePart.
Once you have a FilePart, you can get its fileName (by getFileName()) and would be easy to control if the file's type is what you wanted (e.g. gif,jpeg,...).
Regarding the file size I haven't found a direct method but I believe you should analyse this package and with some workaround it should be done.
Hope this helps, regards.

How can I control selection on a PDF

I have Acrobat Pro 9 Pro build 9.4.6 and am constantly exporting documents from indesign to .pdf, and also building docs in the 'combine' feature from mixed pages.
While everything seems to go reasonably well, I have a few problems that are due either to my ignorance, or bugs.
1. The biggie; How can I control what I select, for the purpose of copying, moving and deleting? When I drag the touch-up object tool over my selection, it selects what it wants to most of the time; sometimes it selects (i.e., puts a light blue box around) the entire page, instead of my selection (no pages are scanned). There are very few instances when I get exactly what I want; there are usually a few lines above or below, no matter how careful I am in my selection. The funny thing is that this is not a constant; sometimes, the tool works perfectly! and I have my heart in my mouth every time I really need it to work, hoping that it will not force me to go back to Indesign to make minor corrections. Perhaps my problems are connected to options I select when exporting my indds, but I've tried checking, clearing, and selecting various combinations and nothing seems to work.
Sometimes, the text selection tool is strange; a wide blue swath develops over the selected text, even though it is still usually possible to edit the text in this condition. And BTW, is there anything to do about the fact that some text can't be edited at all because a suitable font replacement can't be found? Can't a font be added somehow that will take care of this?
2. Headers and Footers; fairly effortless, but if the footer contains two rows and I want them centered, the second row looks centered in the preview but not in the doc. I have to go back to the footer dialog and guesstimate how many spaces to place before the second row to get it to look centered. Also, is there any way to place a logo in a header? That would be one of my requests for the next version of Acrobat, if not.
3.Hyperlinks; they don't always work,even though I check Hyperlinks in the Export settings. Sometimes yes, sometimes no.
4. Typwriter toolbar; it also seems to offer font and size changes whenever it feels like it, and I've tried all different orders of typing, selecting, etc.

It's me again, sorry! I wanted to save what I'd written, and my message popped up to the board.
Thank you for any advice anyone has!
PS My indd and acrobat are the same version, as they came in the same package (CS4). Windows XP sp3.
Oh, one more thing I just remembered, as long as I'm complaining; sometimes if I place an object (the logo) and copy it to another page, it disappears on the original page, as if I've cut it. Any fix for that? (strange how I can edit tmy 'reply' but not my original post...well, at least I found where to ask a question fairly quickly!)

How can I control the zoom on my mac mouse?

How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom". It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

How can I control a button from one swf file to another swf file?

Hi,
I have a main.swf file. From that file I am accessing the external.swf file which is an external file.
Now, how can I write code on my main.swf file for the button which is on my external.swf file?
Activities.MainPanel.close_btn.addEventListener(MouseEvent.CLICK, btnClickClose);
Activities.MainPanel.close_btn (This buttons is actually on external.swf file, but I want to write code on main.swf file to execute it on external.swf) how can I control one swf button on other swf file?
Thanks.

Here's some example code that you should be able to adapt to your needs.
// create a new loader object instance...
var loader:Loader = new Loader();
// make the download request...
var request:URLRequest = new URLRequest("external.swf");
// add a complete event listener to the loader
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, completeHandler);
// start the actual loading process...
loader.load(request);
// create a new empty movieClip instance, you will put the loaded movie into this movieClip once its loaded
var externalMovie:MovieClip;
// this function is called when the download has finished and the file is ready to use...
function completeHandler(event:Event):void {
   // set the contents of the loaded movie to the new empty movieClip...
           externalMovie = MovieClip(event.target.content);
   // add this new movie to the display list...
   addChild(externalMovie);
Now you can refer to the loaded movie with the instance name "externalMovie". So if, for instance, you want to address a button in the loaded movie, you could write something like this on the main timeline:
externalMovie.addEventListener(MouseEvent.CLICK, btnClickClose);
function btnClickClose(event:MouseEvent):void {

How can i control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?

Sup buddies,
How can I control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?
As the project grows in size the load time increases. How does one control not loading all images ,divs,elements etc. until they're
needed on the timeline? For example some sections are off and only become visible when recalled. My projects slowly grow in size so loading
all images , is counter productive . My other option would be to create separate htmls but that breaks the seamless user experience .
TY...Over N Out...

hello, kiwi
quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
yes.
maybe,...
1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
or,
2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
victor

How can I control how many times an individual photo is shown?

How can I control the frequency of each photo on apple tv?

Welcome to the Apple Community.
Photos in slideshows will only be showed once until the slideshow repeats. If you want it to show more than once you will need to duplicate it.
Photos in screensavers show randomly.

How can I control an iPad from a touch screen which is mirroring the iPad screen

How can I control an iPad from a touch screen which is mirroring the iPad screen.
This is a very important application for disability students who wish to use iPad apps but do not have sufficient fine motor skills to use the small screen of an iPad but could use a large format display touch screen.
There must be a way.?????????? Help!!
Peter Niass
[email protected]

Have a look here
http://www.macstories.net/iphone/the-external-touchscreen-that-can-control-an-ip hone/

How can I control printing highlighted part of a page?

Similar Messages

Maybe you are looking for