How can I control the setting of quicktime x internet connection speed

In apple website, They provides a lot of tutorial videos, But thanks to my internet low bandwidth, only low resolution of video can be seen. At the time of leopard(not snow) and quicktime 7, I found that if I select the bandwidth to "LAN" in quicktime control panel of system preference, the video size went up from 480 to 640 pixelin height (although more loading time..)
Are there any way to control quicktime bandwidth in snow leopard? (quicktime X or quicktime 7 for sowleopard)

Hi,
1. How much clients can connect to an access-point (maximum possible vs. recommended)?
ANS -
here is the link for Maximum possible..
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/
c70ccfg.html#wp1085099
Recommended , Not more than 20 clients per AP.
2. Can I limit the maximum number of clients connecting to the same access-point in the controller gui? I only found how to configure thresholds for sending traps when a specified number of connected clients on an ap is reached.
ANS - Here is the software bug whic we had raised with thre development team..
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj94508
Symptom:
There should be a way to limit the number of wireless clients that can associate to a lightweight AP.
Conditions:
Workaround:
3. How can I balance the number of clients between two adjacent ap which are using the same SSID?
ANS- You can configure the feature Aggressive load balancing on the WLC, this may help..
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Similar Messages

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

How can i control the timings of my slideshow using iphoto on my ipad

Q: 1 how can i control the timings of my pupil's slideshows using iPhoto on the iPad?
Q: 2 then how can i export them?
Q: 3 how can i combine them from 8 individual slideshows to 1 for showing to their parents at an assembly?
many thanks in anticipation of your collective help
brian

Here's my take on the same thing:
Short answer: the dpi is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

How can I control the list of cipher suites offered in the SSL Client Hello message? I want to forbid MD5 and RC4.

How can I control the list of cipher suites offered in the SSL Client Hello message?
I want to limit my browser to negotiating strong cipher suites. I'd like to forbid DES, MD5 and RC4.

Set the related SSL3 prefs to false on the about:config page (Filter: security.ssl3.).
*http://kb.mozillazine.org/about:config

How can I control the zoom on my mac mouse?

How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom". It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.

I no longer want to merge my work laptop with my icloud account on other devices. How can I change the setting for the laptop?

I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate. How can I change the setting for the PC at work?

Sign out of iCloud.

I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"?

I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.

wjosten is spot on. If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
Ciao.

How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

There is not now, nor has there ever been a version of flash for any iOS device.
Adobe has abandoned mobile flash, so there never will be.
Browsers like iswifter or photon may work for you, but don't hold your breath.
Check app store for an app of whatever game you want.

How can I change the setting to one appropriate to java1.2

Hello.
I am using WebLogic 4.5.1 .
and recently started to use JDK 1.2 instead of JDK 1.1.7.
So, I set [start]-[weblogic]-[Choose1.2JRE] in environment.
and then, if I execute T3Server, the message of
"javai.dll class path cannot be found " is displayed and the server is not
loaded.
However, javai.dll was in java1.1.X\bin.
I can assume that a setting is to java1.1.X.
--> How can I change the setting to one appropriate to java 1.2
It's my environment
ClassPath
.;c:\weblogic\classes;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\license;c:
\weblogic;C:\weblogic\myserver\clientclasses;C:\weblogic\myserver\serverclas
ses;C:\weblogic\myserver\servletclasses;C:\weblogic\mssqlserver4\classes;c:\
weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudscape.jar;c:\rmi-
iiop\lib\iioprt11.jar;c:\rmi-iiop\lib\iioprt.jar;c:\rmi-iiop\lib\rmiorb.jar;
C:\jsdk2.1\runner.jar;C:\jsdk2.1\servlet.jar
Path :
%SystemRoot%\system32;C:\jdk1.3bin;c:\weblogic;c:\weblogic\bin;
c:\;c:\bat;c:\util\;C:\jsdk2.0\bin
Hyung Gi Min

How can I control the order of playback on MuVu Mix (USB 2.

What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order?
Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play back.
I tried erasing all contents, then copying the files one by one to the MuVo Mix in the order that I want them to play back (name order). But that is not the order that the files play back.
By the way, in both case, I removed the ".dat" file first. (I also tried keeping the ".dat" file, to no avail.)

SSR wrote:
> on the newer MuVos (which I would have thought included the Mix)
> it's filename order. Other than that it's hard to know, but it sounds
> like you ought to contact Support to check.
I did, and they confirmed (very quickly; kudos!) what you and I both expect: the play order is determined by the alphabetical order of the file names. The mistake was mine. I ass-u-me-d that the MSWin folder "Name ^" order was correct. I did not realize that it is not exactly alphabetical when the file name begins with a number (e.g, the track number). I had renumbered songs from a second CD by simply adding 00 to the track number. Thus, songs and 2 of the first CD are played after songs 08 and 09 of the second CD, as they should alphabetically, even though they appear in the order , 2, 08, 09 in the "Name ^" list. Klunk! Mea cupla!

How can I control the direction of Panel Page menuTabs (menu1) ?

Hi all,
in ADF FACES - JDeveloper 10.1.3
how can I control the direction of Panel Page menuTabs (menu1) either from left to right or right to left ?
regards,

In the adf-faces-config.xml file you can add a right-to-left tag.
(Right click on the structure window and choose insert inside...)

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

Since I upgraded to IOS5, my Smart Playlists are in a random order. Since I use it for listening to Talking Books this makes it useless. How can I control the order of a Smart Playlist?

Since I upgraded to IOS5, my Smart Playlists are in a random order. Since I use it for listening to Talking Books this makes it useless. How can I control the order of a Smart Playlist?

It may be best to recreate the folder and the smart playlists from scratch.
tt2

How can I control the order of iDVD menu items using the Arrow keys?

I have a submenu screen containing 10 selectable buttons plus the Return Arrow button. I have ordered all the slideshows in the correct order in the DVD map. However, when I run the program, the arrow keys jump the selection focus in an apparently random sequence. How can I control the order of the selection focus?
I'm using iDVD v 7.1.2
TIA.
Ron

Hi
There is one thing You might miss in iDVD - So do I - the ability to re-arrange in the DVD map (block diagram)
The order things will be pplayed or addrssed is same as the order each item is introduced into iDVD.
To my knowledge ther is no way around this.
Yours Bengt W

How can I control the setting of quicktime x internet connection speed

Similar Messages

Maybe you are looking for