How can I control the visual affect with Camera class?

I've checked the document:
http://help.adobe.com/en_US/AS3LCR/Flash_10.0/flash/media/Camera.html
But still don't find info on how to control the visual affect(like lightness, saturation and so on) of my pc camera.
Is that kind of job possible with actionscript?

Andrei1 , I'm worried I won't be able to see anything in the dark without setting the camera directly.
Will BitmapData manipulations manage to brighten the darkness exactly?

Similar Messages

How can i control the I2C bus with Labview

Hi
How can i control the k8000 from http://www.velleman.be ( I2C bus) with
Labview.
all info is welcome.
[email protected]

if you are using Linux (and the Linux version of LabVIE W) it should be
fairly easy to use the lm_sensors ( http://www.netroedge.com/~lm78/ )
libraries and source code to control a device connected to a PC's I2C bus.
Go here http://www.netroedge.com/~lm78/hardhack.html to see how to tap into
the I2C bus of your PC. You may be able to apply info here to roll-your-own
on a MS Windows 98 / 2000 OS.
Chris
"Wouters V" wrote in message
news:39fff2de$0$4493$[email protected]..
> Hi
>
> How can i control the k8000 from http://www.velleman.be ( I2C bus)
with
> Labview.
> all info is welcome.
>
> [email protected]
>
>
>
>
>

How can I control the delay pedal with a MIDI keyboard?

Okay, I'm looking to perform the song 'Are You In?' by Incubus with some friends, and here's what I want to do...
I have my guitar plugged into a Behringer UCG102 Guitar Link
The link is then plugged into my MacBook running GarageBand
I have an amp preset saved in the program with the 'Blue Echo' delay pedal
While playing, I want to be able to use my external MIDI USB keyboard (Akai MPK25) to control the 'Time' and 'Repeats' knobs on the virtual pedal.
Otherwise, i'm gonna have to keep switching between playing guitar and clicking on the screen and then moving the mouse around frantically.
How can I do this? And is it even possible in GarageBand?
If not in GarageBand, is it possible to do the same in Logic Pro?
My Akai keyboard did come with a piece of software to control the keyboard from the computer. It allows me to save different presets and upload them to it. For the knobs on my keyboard, the software has the option to enter numbers next to each knob for 'CC', 'Low' and 'Hi'
Sorry if i'm not very clear or I don't make much sense, not really sure how to explain everything.

There are two types of sustain pedal... One's with + polarity and ones with - polarity
The sustain pedal you are using, has the oppostie polarity from the standard.. which means when you press it it acts as if it is not pressed and vice versa...
Unfortunately, unlike a lot of keyboards... the Launchkey doesn't provide a setting that allows you to correct this issue... which means that unless the pedal you are using has a built in polarity switch...(In which case power down your keyboard, unplug the pedal and select the opposite setting to what is set now and then plug it back in and power up your keyboard) your sustain pedal is the wrong type and is not compatible with the Launchkey....
Failing that, here is an example of a sustain pedal that has a polarity switch so you can use it with any keyboard....
http://www.amazon.com/gp/product/B00063678K/ref=oh_aui_search_detailpage?ie=UTF8 &psc=1

How can i control the Tektronix AFG3022 with LabView 7.0

I am trying to control the Tektronix AFG3022 Function Generator with LabView 7.0. Is there a premade program I can download and use?

If it is not in 7.0 make new thread and ask nice if someone can convert to labview 7.0.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

How can I control the FAQ title with CSS when using the Ajax effect

I am calling the FAQ module with the Ajax effect.
I would like to set different states with CSS to the title;
I have tried to use :hover, :active and :focus on the div.
It would be nice with a different styling when the item is "open"
(I know there is a problem with the stacking, but I posted that in another thread)
link

Hi
There is one thing You might miss in iDVD - So do I - the ability to re-arrange in the DVD map (block diagram)
The order things will be pplayed or addrssed is same as the order each item is introduced into iDVD.
To my knowledge ther is no way around this.
Yours Bengt W

How can i use the visual j++ with the sun jdk or sumting more update than

what the j++ have

i did what wrote there
now i can compile but when i press !
to run it
it writs
Unable to locate-system-class: java/lang/object
what can i do
(the resone that i use j++ is that i have p 166 mhz
and when i compile whit say kawa / Jcreator ..
it took 20 second but in j++ it took 3 second
thanks to all that help me

How can I activate the average calculation with cl_salv_hierseq_table class

Hi there,
Iu2019m using class cl_salv_hierseq_table to display a two level hierarchy (header and item) list.
For some reason it seams that those calculations are active by default with class cl_salv_table but not for cl_salv_hierseq_table.
I tried every suggestion from the class documentation and SAP help and nothing seams to work, the menu calculation options are always inactive except for the total calculation.
After the cl_salv_hierseq_table=>factory...
And before cl_salv_hierseq_table->display( )
I triedu2026u2026.
cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 1 )
cl_salv_aggregations->add_aggregation( 'COLUMN1' )
COLUMN1 is a currency column in header level table
u2026u2026..
cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
cl_salv_aggregations->add_aggregation( 'COLUMN2' )
COLUMN2 is a dec column in item level table
u2026u2026..
cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
cl_salv_aggregations->add_aggregation( columnname = 'COLUMN2' aggregation = if_salv_c_aggregation=>average )
u2026u2026..
cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
cl_salv_aggregations->set_aggregation_allowed( 'COLUMN2' )
u2026u2026..
cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
cl_salv_aggregations->set_numerical_aggregation( ).
cl_salv_aggregations->set_aggregation_allowed( 'COLUMN2' )
cl_salv_aggregations->add_aggregation( columnname = 'COLUMN2' aggregation = if_salv_c_aggregation=>average )
u2026u2026..
cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
cl_salv_aggregations->add_aggregation( 'COLUMN2' )
cl_salv_aggregation = cl_salv_aggregations->get_aggregation( 'COLUMN2' )
cl_salv_aggregation->set( if_salv_c_aggregation=>average )
Any help will be appreciated!

Thanks Harsh Bhalla,
Subtotals can be built (displayed) at Header Level Only, true but the values to calculate those totals can come from either header or item level, otherwise it wouldnu2019t be of much use would it?
Anyway my question is how to activate the average calculation as well because the totals calculations is already active for either item or header level by default.
For reference when on the display layout Iu2019m referring to the menu Edit -> Calculate -> Mean Value.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I control the zoom on my mac mouse?

How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom". It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

How can i control my mini mac with my ipad on diferent wifi networks?

How can i control my mini mac with my ipad on diferent wifi networks?

Go to my pc, splashtop, team viewer or any of the several remote desktop apps in the store.

I bought a Mountain Lion upgrade for $20 off the Apple site. I have four other Macs all under the same ID. How can I share the new OS with other computers. Or can I?

I bought a Mountain Lion upgrade for $20 off the Apple site. I have four other Macs all under the same ID. How can I share the new OS with other computers. Or can I?

You can share it with other Macs under your control (not your neighbor's). You just need to be logged in under the buying AppleID for updates or to download again.
Use this thread to find a method of copying the ML download into a USB drive to make other installations easier: https://discussions.apple.com/message/16639520#16639520

How can I map the composite_dn name with a composite in run time

Hi All,
I want to craete a report on number of total business and system faults with the help of Information Publisher in OEM 12c Cloud Control. I am fetching data from the table composite_instance_fault present in SOAINFRA schema. Below os my SQL statement:-
select error_category,count(error_category) from prefix_SOAINFRA.composite_instance_fault where composite_dn=??EMIP_BIND_TARGET_GUID?? group by error_category
Now I want to know that how can I map the composite_dn name with a composite in run time. When we fetch data from the repository we used to map target in rumtime by using ??EMIP_BIND_TARGET_GUID?? but here as I am not fetching data from repository, how can I map target in run time.
On executing the above SQL statement its returing an empty table without any data.
Please guide!!
Thanks in Advance!!

Hi,
try something like this.
Mike
Attachments:
Unbenannt 5_LV80.vi ‏12 KB

How can I control the order of playback on MuVu Mix (USB 2.

What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order?
Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play back.
I tried erasing all contents, then copying the files one by one to the MuVo Mix in the order that I want them to play back (name order). But that is not the order that the files play back.
By the way, in both case, I removed the ".dat" file first. (I also tried keeping the ".dat" file, to no avail.)

SSR wrote:
> on the newer MuVos (which I would have thought included the Mix)
> it's filename order. Other than that it's hard to know, but it sounds
> like you ought to contact Support to check.
I did, and they confirmed (very quickly; kudos!) what you and I both expect: the play order is determined by the alphabetical order of the file names. The mistake was mine. I ass-u-me-d that the MSWin folder "Name ^" order was correct. I did not realize that it is not exactly alphabetical when the file name begins with a number (e.g, the track number). I had renumbered songs from a second CD by simply adding 00 to the track number. Thus, songs and 2 of the first CD are played after songs 08 and 09 of the second CD, as they should alphabetically, even though they appear in the order , 2, 08, 09 in the "Name ^" list. Klunk! Mea cupla!

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

How can I control the visual affect with Camera class?

Similar Messages

Maybe you are looking for