How can i control which iView gets updated when a nav node gets clicked?

Hello,
Following setting: the content area of the desktop inner page inside the default frameworkpage usually consist of just one iView.
But what happens when there are 3 iViews inside? How do i have to call the pageloader which of the 3 iViews should get updated when a nav node of the detailed navigation is clicked?
Thanx

Hi
Since you will be using the Merger Id property, they will be linked to a single link in navigational area.
Refreshing a page / clicking the link in navigation Pane will result in refreshing of all the iViews.
Regards
Chander Kararia
# Please close the thread once get the correct answer. Give rewards for answers.

Similar Messages

How can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated

how can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated
== This happened ==
Not sure how often
== automatic updates go on my computer, say if i click yes to update when shutting down

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

IOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

iOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

I think that is influenced by the order in which the apps are installed on the iPad (I believe that it's the most recent 10 ?) - but as I haven't got more than 10 apps that support any document/file type I can't check.
If you want to able to edit the list, then you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
I store my PSD files adjacent to the original RAW file from which it was derived.
If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
How can I control which Photoshop will open a file I select when opening it through Bridge?.

Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

How do I know/how can I control which video card a particular application uses?

Hey there--
Simple question: I have the ATI Radeon HD 2600 256 MB and the NVIDIA Quadro FX 5600 1536 MB installed via PCIe ports on an early 2008 Mac Pro. I've decided for a multitude of reasons that I'd like my displays to be plugged into the HD 2600, but I want certain applications-- Final Cut, games, etc-- to use the FX 5600. How can I be sure that this is happening? Is it possible? Will more intensive applications automatically utilize the proper card?
Thanks much.

Yes, it means the 7970 requires 1 x 6 pin and 1 x 8 pin. The Mac Pro supplies 2 x 6 pin, which is 75 Watts each.
So Mac Pro can supply 75 Watts from PCIe slot and 2 x 75 Watts from 2 x 6 pin for the total of 225 Watts.
The 7970 requires more than 225 Watts. There are people that run these cards from internal power and say the additional power pulled over the traces on the Mainboard won't damage the board, but I've seen several reports of burned out Mainboards and more commonly the PSU just shuts the Mac Pro down hard for safety reasons. Remember: the 2 x 6 pin ports power runs over traces(!) on the board, not over cables. If you over tax them this is a lot more dangerous as with cables.
It's up to everyone to decide for themself if they want to risk running cards above the power provided by the Mac Pro.
The safe way is always to go for 2 x SATA to 1 x 6 pin adapter and 2 x 6 pin to 1 x 8 pin adapters and provide the power for 7970 / R9 280x or GTX 780 in the Mac Pro like that. Or get an external / additional PSU for power hungry GPUs. That works, too.
But you will obviously lose 2 x SATA ports. I run eSATA with RAID5 anyway, since RAID5 in the Mac Pro is too much of a hassle.
Of course all that matters if it works in the end. But official power specifications are a matter you shouldn't take too lightly.

How can I control which display my dock displays on?

When I boot my MacBook Pro, the dock starts on my MacBook screen, but if I use my Thunderbolt display a lot, the dock suddenly jumps over there, where I don't want it. How can I force the dock to go back to my laptop screen and stay there?

This is a new feature in Mavericks. Each display now can have a “separate space.” This allows one to access the menu bar and dock on any screen. It also means application windows will start on the screen that is active (a feature I don’t like). It enables a display to be in full-screen mode (e.g. for showing a movie) while the other screens are in normal mode.
If you don’t like these features and prefer the Mountain Lion common display space you can disable separate spaces.
System Preferences > Mission Control > Displays have separate spaces > Uncheck the box.

How can I control creation of empty tags when using ora:view syntax?

I'm using XMLQuery and ora:view syntax to create xml resources in the database but I'd like to be able to prevent the creation of empty tags for null values in the table.
CREATE OR REPLACE PROCEDURE proc_ctsi_build is
XMLdoc XMLType;
BEGIN
DBMS_XDB.deleteResource('/public/CTSI/ctsi_phsall_rpt1.xml',1);
SELECT XMLQuery(
'<Progress_Report>
<Personnel_Roster>
{for $c in ora:view("CTSI_INVEST_SOURCE_V")
    let $username := $c/ROW/COMMONS_USERNAME/text(),
$expertise := $c/ROW/AREA_OF_EXPERTISE/text()
     return
<Investigator>
   <Commons_Username>{$username}</Commons_Username>
<Area_of_Expertise>{$expertise}</Area_of_Expertise>
</Investigator>}
</Personnel_Roster>
</Progress_Report>'
RETURNING CONTENT) INTO XMLdoc FROM DUAL;
IF(DBMS_XDB.CREATERESOURCE('/public/CTSI/ctsi_phsall_rpt1.xml', XMLdoc)) THEN
DBMS_OUTPUT.PUT_LINE('Resource is created');
ELSE
DBMS_OUTPUT.PUT_LINE('Cannot create resource');
END IF;
COMMIT;
END;
In this example how can I prevent getting <Area_of_Expertise/> in my output when AREA_OF_EXPERTISE is null in the table?
Thanks

Hi,
you can use if else conditions.
{if ($expertise) then
<Area_of_Expertise>{$expertise}</Area_of_Expertise>
else ()}
**not tested**
Ants
Message was edited by:
Ants Hindpere

When looking at recent calls on my iPhone running iOS 7, how can I tell which number called me when a contact has multiple numbers listed?

I have an iPhone 5s and I am coming from an Android phone. On the Android phone, when looking at recent calls both the contact name and the number is displayed. On my iPhone I only see the contact name, in the case of contacts with multiple numbers attached how do I see which number the call came from?

Click the "i" in the circle to the right of the contact name.
The phone number the call came from is listed in blue.

How can I force Firefox to override javascript when opening links with ctrl+click?

There are certain sites that always open up a link in the active window despite said links being opened by ctrl+clicking it. Basically what happens is that a java script on the site forces the active window to load the link while at the same time Firefox follows the ctrl+click command and loads it in a new tab. You end up with two tabs with the same information and always have to go back in your original tab to be able to open other links.
Usually you can open the link the way you want by right-clicking and selecting 'Open Link in New Tab' but for some reason ctrl+click is treated as if it was a regular click. How can I stop this from happening and force Firefox to ONLY load the new tab?
This problem is not specific to the version of Firefox I'm using or the operating system, but seems to be caused by java script on the site. Disabling java scripts makes the problem go away but sometimes it also disables the sites.

If you're trying to protect your browser from hackers, I'd recommend setting up a master password for your saved passwords. Other than that, your anti-virus and firewall are responsible for keeping your computer safe.
If you're trying to protect your browser from someone else (i.e. somebody who can physically use the computer) just lock your entire computer with a password. If someone else has to use it, you could try letting them use the guest account.

How can I control which apps use cellular data?

Sometimes I marvel at Apple's amazingness and sometimes I can't believe the holes. Googling around I get the impression that iOS/iPhone provides no means for a user to take control of their data plan and set which apps are permitted to use cellular data and to track cellular data usage on an app by app basis. Am I the only one that finds it unbelievable that an operating system designed for a cell phone that supports adding piles of sometimes sketchy 3rd party apps doesn't have this baked right in? There seem to be a few apps try monitor overall aggregate data usage, but they are useless at getting to the root cause.
So, I hope I'm just missing it. How do I figure out which broken, buggy, misconfigured app I stupidly installed is eating my data plan? Maybe Android is a better choice for guys like me that are too busy to play whack a mole uninstalling and reinstalling apps for hours and days to try to solve such a tedious mystery.
Thanks!

This is a user to user forum.
You can leave feedback here
www.apple.com/feedback/
You could also try searching for an app that tracks data usage

How can I tell which Apple Security Updates are installed?

While troubleshooting a printer issue, I installed some 'Extra' printer profiles from my OS 10.6 Install DVD. After which, I got a dialog box from the Installer saying that I may have replaced some newer items with older ones, and it suggested I run the latest OS "Combo" installer. Which I did, even tho Software Update said I was up-to-date.
But apparently, when I ran the "Mac OS X 10.6.8 Update Combo v1.1" -- it downgraded some of my Apple software to older versions. For example, I know for sure Safari was at 5.1.2 before I ran the Combo, and it's now at 5.0.5. Yet Software Update is not telling me about v.5.1.2, which it shows as already being installed (at a date prior to me running the Combo updater).
So my question is:
What other software might have been downgraded by the 10.6.8 Combo v1.1 -- and if Software Update thinks I running the current versions, how am I going to find out for sure?
Obviously, I can check version numbers of my installed Apple software like iTunes and Aperture against the latest updates available at Apple Downloads, but I don't know how to check on background files like Security Updates, Java, etc.
I am particularly concerned that I am running the latest Security Updates.
Thanking you in advance,
- gw

steve626 said:
"... There you will be able to see if a more recent version of Safari, etc. was replaced with an older version."
Not exactly. That screen shows my most recent Safari update was 5.1.2 on 12/16/11 -- then it shows the Mac OS X Update Combined was installed on 1/2/12. That's when my Safari got downgraded to 5.0.5, but that detail is missing from the Installed Updates preference pane.
It looks like once an update gets installed, Software Update remembers that -- but does not take the newer update off the list if an older version replaces it???
So, even though I see Security Update 2011-006 was installed on 10/21/11, I'm not sure if the OS Combo Update replaced any security items with older bits. Is there anything specific to security updates that I might be able to check?
-gw

How can I control which email FaceTime uses?

When my daughter uses FaceTime from her Mac, both my wife's and my iPads ring. She would like to be able to choose to FaceTime just one of us at a time. When she initiates the call from her Mac, she chooses my wife's email address, but I also get the call even though that address is not entered in my iPad's FaceTime settings as an address that I can be reached at. The same happens if she tries to call just me, my wife also gets the call. My wife and I have no email addresses listed on our FaceTime settings in common. The thing we do have in common is an Apple ID with the credit card we share, so all purchases are done through that Apple ID. My wife has a separate Apple ID on her iPad for everything else though.
Any ideas on how to allow my daughter to choose which of us that she'd like to contact?

For Apple IDs, we have:
My iPad: [email protected] (this is our shared account with credit card for purchases)
Wife's iPad: [email protected]
Daughter's Mac: daughter [email protected]
We don't have iPhones, so there are no phone numbers in our settings for how we can be reached. None of us share the same email addresses in our "You can be reached at" settings. My wife had her work email address there, along with her AppleID address, but the work email said "verifying" next to it, but that has probably said that for years. My daughter tried that email, and my wife's Apple ID emails, and every time my iPad also rang. Even after my wife completely removed her work email, my daughter was able to make a FaceTime call to that address and got both of us.
I appreciate your help on this, but these were what I thought were obvious settings to check and already checked them all. What seems to be obvious to both of us, is not working. Weird.

How can I save downloaded iOS system updates when using multiple iPhones

I have multiple iPhones, and every time I want to update them, I have to wait forever for these downloads to transfer. The update downloads, but is not saved so that I can use it for another iPhone, requiring me to download the same file yet again, and again, and again, wasting my time. Any ideas or is this a lost cause?
Message was edited by: Ron Yochum

Not sure about a Mac, but on Windows it does save the file to a location in the users profile area and if the phones are identical (eg: both 3GS) I have been able to copy the file to the location in the other users profile and have it use it to update.

How can we control the standard filed using CUF?

Hello
We use SRM Server 5.5 (SP 07)
We want to make the Price field as display on shopping cart screen.
We created CUF for PR type. We have PR01 and PR02.
If PR type is PR01, we want to make Price field as display.
So We tried to use BBP_UI_CONTROL_BADI. But this BADI is not working.
We found notes for this badi and applied this note to our system.
Notes number:
1053594
1046796
1040879
1058238
1021742
But we still have problem. The parameters IS_HEADER and IS_ITEM are not filled.
How can we control price field as display, when we choose the PR type with PR01?
Thank you,
Best Regards,
SH.

Hi,
You can use the BADI BBP_DOC_CHANGE_BADI along with BBP_UI_CONTROL_BADI.Check the Transaction type calue in BBP_DOC_CHANGE_BADI badi and acc set a flag(using SET stmt) and pass this flag to the BBP_UI_CONTROL_BADI(using GET parameter) and then change the Field property for PRICE field.
BR,
Disha.
Pls reward points for useful answers.

How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

Thanks for looking into this Jeff!
I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
The problem tracking updates with Desktop Creative Cloud Software are;
1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get detected with the software version update which would create problem in reporting.
3)For all CC products, there is no base or previous updates available for installation if we miss one.
I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
Regards,
Subrat

How can i control which iView gets updated when a nav node gets clicked?

Similar Messages

Maybe you are looking for