How can I convert a bitmap image into an array in LabVIEW 6.0.2, then to a spreadsheet for further analysis without NI-IMAQ or Vision?

I do not have NI-IMAQ or NI Vision.
I acquired the image using a picolo board then just saved it as a bitmap file.

You want to convert it to an array of what? Of numbers? Of LabVIEW colors?
The "Read BMP File.vi" VI outputs a 1-D array of the pixels, but I suspect it is not exactly in the format that you need. I am NOT sure, but I think that each group of 3 elements of that 1-D array (which is inside the cluster "image data" that the VI outputs) represents the red, green and blue levels of a single pixel (but it may be hue, saturation and lum.). Also, since it is a 1-D array, you would have to divide it by the width (which is also included in the "image data" cluster) to get some sort of 2-D array of data.
You can find the "Read BMP File.vi" VI in the functions palete> "Graphics & sound">"Graphics Formats".

Similar Messages

How can you convert a PDF File into a picture format for uploading?

How can you convert a PDF File into a picture format for uploading?

If you have Acrobat 11, you'd select: File > Save As Other > Image
and select one of the available image formats.

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

How can I convert a pdf file into a usable xcel file

how can I convert a pdf file into a xcel file. the pdf file file is layed out in colums, justified and separated in various types - i need to be able to set colum limits manualy, thanks for your input/

Without further information, I would suggest using either Acrobat or the Export PDF service.

How can I convert a Word document into Adobe PDF format?

How can I convert a Word document into Adobe PDF format?

You can use Adobe Acrobat or Adobe CreatePDF.

How can I stream videos that come into my imac directly to my AppleTV and then my TV

how can I stream videos that come into my imac directly to my AppleTV and then my TV?

Or... you can just use a 3rd party solution.
Best solution for streaming audio and video to your Apple TV from an Mac or Windows PC... without using iTunes... is Airparrot. You can screen share your Mac to your Apple TV. It even lets you select your overscan/underscan and video quality.
Download it and install. It shows up in your system tray. As long as you are on the same network as your Apple TV, just right click the Airparrot icon and select Apple TV as your Airplay device.
http://airparrot.com
Then hook up your wireless keyboard and mouse and plop on the couch for some supersized web browsing.
It's 20 minute sessions for the free version, $9.99 for full and can gift to someone for $4.99 if you buy for yourself.

How can i convert this data(00000000) into date format(yyyy-MM-dd)

Hi,
i am using this method to convert date format from string.
public static string FormatDate(string inputDate, string inputFormat)
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
string datepresent = DateTime.Now.Date.ToString("yyyy-MM-dd");
return datepresent;
its working properly,
but when input data is like 00000000 i am getting error this is not valid.
how can i convert this into date format any help..!

Have you tried the above code:
I can see it is working with both Date and DateTime destination nodes.
Map:
Functoid Parameters:
Functoid Script:
public static string FormatDate(string inputDate, string inputFormat)
string datepresent;
if (inputDate == "00000000")
datepresent = "0000-00-00";
else
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
datepresent = date.ToString("yyyy-MM-dd");
return datepresent;
Input:
<ns0:InputDateString xmlns:ns0="http://DateFormat.SourceSchema">
<DateString>00000000</DateString>
</ns0:InputDateString>
Output:
<ns0:OutputDate xmlns:ns0="http://DateFormat.DestinationSchema">
<Date>0000-00-00</Date>
</ns0:OutputDate>
If this answers your question please mark as answer. If this post is helpful, please vote as helpful.

How can i convert a .indd file into pdf

please help on this
How can i convert .indd file to pdf file using .net c#
please share some code sample for a better help

Hi there,
There's actually an easy streamlined way to do this using Acrobat.com. Here are the steps:
1. Log in to Acrobat.com with your Adobe ID.
2. On the left, you'll see a navigation menu that includes the item "Import and Edit". Click that.
3. Choose the .doc (Word) file you want to convert and upload it to Buzzword.
4. After making sure that it looks the way you want it to, go to the top menu (still in Buzzword now, not the organizer where all your files live) and click the document menu. There will be an option to "Export" - choose that.
5. When prompted to select filetype, choose "Adobe PDF" and press OK.
6. It'll save to your desktop, so now you have to get it into your acrobat.com organizer. To do that, close the Buzzword document by clicking the little "x" in the upper right corner, under the Sign Out button. This'll get you back to your organizer, where you can choose "Import" from the left nav menu again. This time choose your new PDF file.
7. Select the file icon in the organizer and click the Share button. Or, select Share from the file context menu.
8. Select Allow Anyone With A Link To Share This Document to set the document to open access, and then click Copy Embed Code. The necessary HTML code to embed the preview is copied onto the clipboard.
9. Open the HTML file and paste the code into the file. The Flash previewer can display any file type that you can convert to PDF.
Hope this helps! Good luck, and let us know how it works out.
Rebecca

How can one convert a PSD file into a RAW or DNG file?

Lightroom does not assemble panoramas. One must use an external editor,eg, Photoshop Elements, to construct a panorama. Lightroom prepares the selected images by converting them to PSD files before sending them to the Elements Editor. When the panorama is achieved, it cannot be saved as a RAW nor DNG file even if either of those formats were the original data format type in Lightroom. Thus when the panorama is imported back into Lightroom it is brought back as the PSD or something of your choosing; but you cannot choose a RAW nor DNG format. The result is a folder in Lightroom with a hodge-podge of formats.
Question: How can the PSD file panorama be converted into a RAW or DNG file in this transfer from an outside editor to Lightroom?

That simply cannot be done. The conversion has to take place in order for Photoshop to create the panorama. Photoshop, by itself, without Camera Raw, cannot edit raw image data. By the time an image is opened in Photoshop is no longer raw image data. Photoshop is not capable of saving raw image data. The best thing to do is perform is much of the work as possible using using Lightroom. When I do a panorama image, I highlight all of the images and use the menu option to match total exposures. Then I do as much as possible on those images in Lightroom. Once the images leave Lightroom the raw editing is finished. Anything from that point onward that is done in Photoshop must be saved to a different file format.

How can i convert a hexidecimal image file to a bmp file

i have an array of hex data, each of the 7707 rows has 80 characters, i want to convert this to a standard windows bmp or jpeg file, any ideas how to do it?

stewbert;
Is that only one image or there are several images in that array? If the array is the image, and columns (number of characters) and rows correspond to what you are saying your array contains, it is a big image!
There are other questions that needs to be answered, like, each character, how many numbers contains (looks like "EF" or like "EF3B5A".) Such sizes give ideas of the format and to where is the color table.
You can play with the "Draw XXX Pixmap" VIs located in Function palette -> Graphics & Sounds -> Picture Functions and see if one of them renders an image.
I think the best would be if you can post a sample of your array so somebody here can look at it and try to "decode" it.
Regards;
Enrique
www.visecurity.com
www.vartortech.com

How can I convert a Pages document into PDF or RTF?

I have been asked to send a Pages document to PC users in RTF or PDF format. How can I get my Pages document to convert into other formats for PC people?
Is that what the export feature is supposed to do? I just don't know how to sent my document via e-mail to non-Apple conputers!

You didn’t indicate whether you are using Pages ’09 v4.+ or the latest Pages v5(.2) release. To send an email with either Word or PDF attachment from within Pages:
Pages ’09 v4+
Pages menubar > Share (category Send via Mail) > (select Word (.doc) or PDF). Mail will launch into a compose window with the document already attached.
Pages v5+
Pages toolbar > Share > Send a Copy > Email > (select Word (.doc/x) or PDF - best). Mail will behave as above.
Note: Either version of Pages is not an MS Word clone and it must translate content into the Microsoft document architecture. If you must have maximum Word document accuracy, you will need Office for Mac 2011, and the associated MS Word application that produces native .docx format.
Backup your work.

How can I Manually Insert an Image into a Picture Control?

Hi,
I am able to insert an image programmatically into a picture control. But I want to insert an image into the picture control without any code that is manually. How can I Do that?
Thanks in Advance
Regars,
Malleswari

malli wrote:
Hi,
I am able to insert an image programmatically into a picture control. But I want to insert an image into the picture control without any code that is manually. How can I Do that?
Thanks in Advance
Regars,
Malleswari
You may also drag and drop a picture directly to your front panel. You can also use paint, or some other tools, to copy a part of a picture and past it into your front panel. This actually works for the block diagram also. Se example
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Attachments:
pic example.vi ‏157 KB

How can I convert a word file into a pdf and then upload to a web site?

I need to convert a word document into a pdf and then upload it to a web site so people can read it from my
site. How can I do this? Can anyone please help? I'm only a newbie. Thanking you in anticipation.

Hi there,
There's actually an easy streamlined way to do this using Acrobat.com. Here are the steps:
1. Log in to Acrobat.com with your Adobe ID.
2. On the left, you'll see a navigation menu that includes the item "Import and Edit". Click that.
3. Choose the .doc (Word) file you want to convert and upload it to Buzzword.
4. After making sure that it looks the way you want it to, go to the top menu (still in Buzzword now, not the organizer where all your files live) and click the document menu. There will be an option to "Export" - choose that.
5. When prompted to select filetype, choose "Adobe PDF" and press OK.
6. It'll save to your desktop, so now you have to get it into your acrobat.com organizer. To do that, close the Buzzword document by clicking the little "x" in the upper right corner, under the Sign Out button. This'll get you back to your organizer, where you can choose "Import" from the left nav menu again. This time choose your new PDF file.
7. Select the file icon in the organizer and click the Share button. Or, select Share from the file context menu.
8. Select Allow Anyone With A Link To Share This Document to set the document to open access, and then click Copy Embed Code. The necessary HTML code to embed the preview is copied onto the clipboard.
9. Open the HTML file and paste the code into the file. The Flash previewer can display any file type that you can convert to PDF.
Hope this helps! Good luck, and let us know how it works out.
Rebecca

How can I convert a Java program into a screen saver ?

I want to write a screen saver in Java, which is to be run under Window 95 platform. However, I don't know how to convert a .class file into a .scr file ?

A SCR File is just an renamed exe file. So what you need is an CLASS2EXE converter (there are some around) and than simply rename the file to scr.
Dont forget the special parameters scr files have, like /s or /c for config...look up in google for those.

How can I convert a bitmap image into an array in LabVIEW 6.0.2, then to a spreadsheet for further analysis without NI-IMAQ or Vision?

Similar Messages

Maybe you are looking for