How can I convert a MP4 file to a MOV file to be viewed on my windows PC?

How do I convert a MP4 movie file to a MOV fIle so I can view it on a Windows PC?

Hello, there are many such software can convert the file format, the conversion from MP4 to MOV format, avi formats to MP4 formats, these formats are supported, you can try this software, supports converting various formats , this software is free to download the trial, I have been using.
I hope you can help.

Similar Messages

How can I convert a feature length HD 25fps .mov file to NTSC and preserve the exact duration?

Hello all
I seem to stumble over a small but significant timeline distortion: I'm trying to convert a full-length feature film file (1:52:07:01) from the source file, which is full HD at 25 fps to .m2v in NTSC for use on DVD. The picture quality is excellent, especially with highest quality settings, but even using Frame Controls, allowing Compressor to choose the ideal frame rate and setting the duration of the target file at 100.000% of the source file, the result has now repeatedly been 7 seconds shorter than the original. (Which, by my estimation, would in fact be about 0.1% out, so more than the tolerance thresold indicated.)
Ordinarily, this might not be a big problem, if it weren't for the fact that the film is subtitled in three languages and this means that from about a third into the film now these subtitles in DVD Studio Pro appear progressively out of synch. (And anyone working with DSP will know how cumbersome shifting subtitle clips is...)
Any help greatly appreciated.
Many thanks
Sebastian

thanks again russ for your help with this - i've been able to solve the problem. i did try your approach, though for reasons which probably have nothing to do with anything, the export didn't complete and i ended up with a file that suddenly stopped, twenty minutes short of the ending.
in the mean time, though, i rendered both picture and sound out at 100.1% of the source file duration (which is the relative length compressor calculated when i used frame controls to set the output file to precisely the absolute lenght of the source file) and this seems to have worked. i now have an NTSC formatted .m2v and an .ac3 file, which are in synch with each other and with the original time line and therefore with the subtitles.
hope if anyone comes across a similar issue, this may be useful to know.
many thanks & all best

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

How can i download mp3,mp4,flv,vedio,all tape file.

how can i download mp3,mp4,flv,vedio,all tape file.

If I understand the question correctly, you want to download certain file types and not play them. See
[[Set how Firefox handles different types of files]]

How can I convert a UTUBE video to a movie usable in Power Point?

How can I convert a UTUBE video to a movie usable in Power Point?

How can I convert a UTUBE video to a movie usable in Power Point?

How can I save my dvd project as a .mov file?

I'd like to post an iDVD project on youtube, but first I have to convert it to an .mov file. How do I go about this?

Do you have the original source files that you used to create the iDVD project? You would get a better quality final product if you used the original source material to create a Quicktime movie file for uploading to YouTube.
Otherwise you will need to rip your DVD with an application like Handbrake to get a movie file of the content. The resulting quality will be considerably less than the original source material.
OT

I'm making an intentionally terrible montage. How can I convert a gif to a transparent .mov?

I want to be able to insert gifs into my final cut videos. They have to loop, and be transparent.
Is there a program that can convert them into transparent .movs or some other format recognized by Final Cut Pro?

Quick Time Pro should be able to open the GIF and save as a Quicktime .mov file. Whether the looping will work I don't know and can't test it.myself.
If you don't have QT Pro, it's a $30 license.
Russ

How can I burn a dvd with a short movie file on my Imac so it will play on a dvd player? I keep getting an error message on my player "wrong disc type".

How can I burn a small movie file to a dvd that will play on a dvd player? I keep getting an error message "wrong type of disc" on my player. My burner is built in to my monitor. Will I have to buy software such as Toast to burn with?

I'm using the burner utility that came with the computer. The video is on I took with my small camera. I'm using a DVD-r disc and I drag the file to the disc icon then hit burn and everything seems ok. I can remove the disc and put it back in and see the file but if I put it in a DVD player it won't play, just get error message.

How can I convert 400 data points from a spreadsheet file to an array?

The spreadsheet file contains over 5000 data points (in one column) of which I only want the first 400 and want to convert them to an array in Labview. I tried to use the 'readfromspreadsheet' vi but it wasn't much help. Please tell me how i should approach this problem and what vi's to use.

I attach a model vi that you can experiment with. You will need to know the formatting of the data in your file, from there -plus the delimiter- you'll be able to estimate how many characters makes the first 400 data point. It's possible to develop a more robust vi to do this, in the mean time, the attached vi can quickly give some answer.
Attachments:
model.vi ‏28 KB

How can I convert a Pages document to a jpeg file?

I need to convert a design I created in Pages into either a jpeg file or creat an "object" out of the design. I can't figure out how to do either one. Thanks for any help you can offer!

Hi Susan,
1. I think that there was a missing comma in Peter's reply:
Copy your design switch to Preview .app go command n and your design becomes a pdf.
Copy your design[,] [and then] switch to Preview .app go command n and your design becomes a pdf.
2. In your reply: couldn't find Preview. app.
On my Mac, Preview is listed in Launchpad, and also in Finder > Applications folder.
Thank you posting a reply.
Regards,
Ian.

How can I convert e-mail messages to either PDF files or Microsoft Word?

I want to be able to convert my Thunderbird e-mails to either PDF files or Microsoft Word. It doesn't matter which. I want to be able to do this so that they can be saved on a flash drive in readable form for anyone who is interested in them.

How about a text file?
Right Click-Save As-Text File

How can I convert a MP4 to WMV ?

I have movie in MP4 format that needs to be converted to WMV. A freeware suggestion would be great but maybe there's a solution on my iMac I don't even know about. Thank you.

Ann Marie O wrote:
… that needs to be converted to WMV. …
the legal way is to purchase a licence of flip4mac
http://www.telestream.net/flip4mac/overview.htm
for export you need at last the 49$ Studio version …
there are cheaper converter apps at AppStore claiming optional export to wmv - but I doubt, those have a licence from Microsoft for their proprietary codec .........

How can I convert my animation into a working movie clip that can be used with a new scene?

Hello all,
First and foremost, I AM A TOTAL FLASH NOOB. I want to preface this and make it incredibly clear how new this all is to me. I LITERALLY started using flash this morning; that is precisely how new I am.
With that being said I am going to do my best to explain what I'd like to do.
I have created an animation of a spider moving its legs back and forth. I want to be able to combine all of the layers into 1 simple animation that can be imported into new flash scenes with the animation exactly how it stands. I have figured out how to convert the whole animation into a symbol AND I have figured out how to import the movie clip from the library. However, herein lies my problem. When I open a new flash scene and import my animation, I play it and it does nothing at all. It's just the static image of the spider I created with no movement.
I've spent the last couple hours trying to figure out (and doing my own research) what I have done or didn't do to get to this point. I'd be willing to bet I am just going about the entire process incorrectly and I'm simple overlooking a basic facet of the program.
Any insight to fix my ignorance is greatly appreciated.
(P.S. Hell, I don't even know if I am using the correct terminology so for all I know I am confusing every person who has taken the time to look at my question. If I am using incorrect terminology please correct me to avoid future hang ups. Thank you.)

Ned! This totally worked! Thank you! I knew there was a tiny piece of this whole thing that was preventing me from making everything work. Unfortunately as my luck would have it, although I have the movieclip working the spritesheet converter I'm using now no longer recognizes the movie clip. The converter says there are 7 frames in the animation, but doesn't display any working sprites. Just a blank sheet. Frustrating to say the least.
I'm just going to throw everything out on the table here:
This is the video tutorial i'm using to convert my animation into a spritesheet. I've done the steps exactly as directly up until the point I actually click "Begin Conversion." When begin conversion is selected, it shows the movieclip exists on the bottom left underneath "list of movieclips" but doesn't actually show any individual sprites.
Here's the simple sprite converter I am using.
The irony of this whole situation is that you have successfully helped me make a working movieclip (which was the important piece), but the converter no longer recognizes it. Whereas before, it would at least show the image on the 1 frame of animation it had.
If you wanted to to take a stab at it and see if you can successfully get it to work I'd be appreciative. If not, I totally understand as you have already been incredibly helpful and have my eternal gratitude for getting me this far. These animation programs can be quite overwhelming when they so vastly differ from one another. Don't even get me started no Anime' Studio Pro.

HT3775 how can i convert a mod file (on vlc) to mp4 to work on quicktime

how can i convert a mod file (on vlc) to mp4 to work on quicktime
when i connected my video camera and imported the videos, they're default is to play on vlc
they are mod files
i want to edit the videos on imovie and for that the videos need to be mp4 and open in quicktime player
what do i do

iPhone supports
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
If your video is supported, drag it to iTunes and sync it to your iPhone.

How can I convert a MOV file to 4K MP4?

How can I convert a MOV file to 4K MP4 file? I can't find any default setting for MP4 nor I do known how to set one.

Start with the Plus sign in the Setting pane> New Setting. Choose MPEG4 from dropdown. Give it a name and save and it will be saved in your custom presets. Make adjustments to resolution, bit rate, etc in Inspector.
Russ

How can I convert a MP4 file to a MOV file to be viewed on my windows PC?

Similar Messages

Maybe you are looking for