How Can I Convert a VHS to Use on FCE?

Could someone please help me out here and let me know what I have to do? Do I have to go through a DVD first? If so, how do I do it? Thanks!
Ben

Hi(Bonjour)!
First, you need a digital camcorder with firewire connection (iLink or other name for it like IEEE-1394), and the analog to digital conversion capability. A dedicated analog to DV converter like Hollywood bridge or other product can does the job too.
You'll have to plug your VHS VCR to your camcorder with analog cable (the red, white and yellow one: if your VCR has just one audio channel, use the white one.)
Activate your analog to DV conversion in camcorder's VCR menu.
Plug your camcorder to your mac with a firewire cable.
Lauch Final Cut Express, set easy setup to firewire basic NTSC(or PAL for europe) and start the capture now command.
You will be able to get one long clip with all your shots included.
With the razor blade, cut this footage in individual clips.
Michel Boissonneault

Similar Messages

  • How can I convert .mov files for use with other apps?

    When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
    Thanks - J
    RS720G   Windows XP  

    Kodak Digital Camera QuickTime MOV Problems
    After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
    I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
    I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
    The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
    The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
    The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
    The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
    The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
    The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
    It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
    After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
    RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
    The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
    Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
    Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
    The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
    Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
    After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
    It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
    After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
    Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
    So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
    From here, however, there are still a few snags to untangle.
    The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
    I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
    Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
    That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
    Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
    The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
    So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

  • How can I convert .voc files to use on my Mac?

    I bought a little RCA audio recorder which works great... except that my iMac doesn't seem to recognize the .voc files that the recorder produces.  I tried "Switch", but it didn't do any better.  I tried "Sox", but immediately got a message that it quit unexpectedly.  WHAT MIGHT WORK?????? 
    Thanks,
    Ted

    This should do the trick:
    http://www.bigasoft.com/articles/how-to-convert-voc-to-mp3-wav.html

  • How can i convert a string to use on a image property?

    public function excluir(nome:Image):void
                                            nome.enabled = false;
    it's simple...
    I'm trying to use a string who comes from the db to set on image property.
    it's like -> id.enabled = false

    Hi,
    What are you trying to do?
    s:Image is a component in flex, with source property you set the path and name of the image for the s:Image component.
    http://help.adobe.com/en_US/Flex/4.0/UsingSDK/WS2db454920e96a9e51e63e3d11c0bf69084-7f9d.ht ml
    If you have a list of images path in the database you can probably read all in arrayCollection and add those images in a list like:
    http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_2.html
    I hope this help

  • How can I convert feet to meters using Numbers

    Does anyone have a formula for converting feet  to meters?

    Convert m to in, QUOTIENT will give you the number of feet, MOD will provide the number of inches left over, truncated to the last full inch.
    If you want the result rounded to the nearer full inch, round the result of the initial conversion. If you need fractions of inches (ludicrous if the original figure is to the nearest metre), that can be done as well.
    m in B2,
    formula in C2: =ROUND(B2*39.3700787,0)  (inches, rounded to nearer full inch)
    formula in D2: =QUOTIENT(ROUND(B2*39.3700787,0),12)&" Ft. "&MOD(ROUND(B2*39.3700787,0),12)&" In."
    Regards,
    Barry

  • How can I convert a "VCD" to use in FCP or convert to make a dvd in DVDSP

    Hi guys,
    My client gave me a vcd that I need to make a dvd of, if possible, re-edit in FCP.
    Is there anyway to convert "vcd" to bring into FCP,
    or to convert and make a dvd.
    Anyone please,
    Thanks,
    Zia

    Hope this helps
    http://www.videohelp.com/tools/SVCD2DVD
    http://www.goodfiles.com/viewapp.asp?app=graphicconverters/vcd_managerpro.xml
    http://www.google.com/search?hl=en&q=vcdto+dvd&btnG=GoogleSearch

  • Can I convert my VHS tapes into DVD using iMAC?

    How can I convert my VHS tapes into DVD by using iMAC?

    From VHS to DVD
    http://www.macworld.com/article/1030972/fromvhstodvd.html   <<< click here.
    How to Convert a VHS to a DVD for Mac OS X
    http://www.ehow.com/how_6515774_convert-dvd-mac-os-x.html   <<< click here.
    Roxio unveils VHS to DVD converter for Mac
    http://www.macnn.com/articles/09/05/26/roxio.vhs.to.dvd/   <<< click here.
    How to Convert VHS to DVD on Mac OS X
    http://www.daniusoft.com/tutorial/burn-vhs-to-dvd-on-mac.html   << click here.

  • I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

    I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

    It's almost impossible.  The new iMacs have a Target Display Mode, but it's built to do that.  Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15.  In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
    By the way, I found your answer by searching this forum.  I would suggest using the search function here in the futuere.

  • How can I convert MPEG files (stored on a PC) to use in iMovie on my Macbook Pro?

    How can I convert MPEG files (stored on a PC) to use in iMovie on my Macbook Pro?

    Get a free app called MPEG Streamclip.
    Available here.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Drag your clip or clips into MPEG Streamclip. Then use FILE/EXPORT TO QUICKTIME to export the clips in Apple Intermediate Codec.
    Sometimes, MPEG2 clips also require that you install the Apple QuickTime MPEG2 Playback Component. MPEG Streamclip will tell you if you need this. This is available from Apple for $20.

  • How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.

    How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.
    Thanks for any help you can furnish.
    Ed

    Well, this question really belongs in the iTunes forum, which is where you will get fast answers.
    Just go to iTunes Preferences.  Click on the General icon.  Set When you insert a CD to Ask to Import CD.  Click on Import Settings.  Set Import to MP3 decoder.  Make sure you're using Good Quality.
    This should deal with your CD's.
    With your current music, as long as it does not have DRM restrictions (older iTunes Music did), select the song, right click on the song (or group of songs), pull down to Create MP3 version. 

  • TS1859 I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

    I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

    hi
    download perian from internet, it'll solve your issue.

  • Can I convert PDF to PPT using adobe acrobat x standard? If so, how?

    Can I convert PDF to PPT using adobe acrobat x standard? If so, how?

    Hi meganl52100253,
    With Acrobat X, you can save to Word and Excel format by choosing File > Save As. But saving to PowerPoint wasn't introduced until Acrobat XI.
    You're welcome to try Acrobat if you'd like. You can download a free 30-day trial from http://www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • We use adobe acrobat X pro, how can I convert pdf to worl document?

    we use adobe acrobat X pro, how can I convert pdf to worl document?

    Hi ,
    Please refer to the following link to convert PDF to word file.
    http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7eeb.w .html
    Regards
    Sukrit Dhingra

  • How can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?

    how can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?

    As has been mentioned Adobe Reader cannot export PDF page content. Nor can it create PDF or manipulate PDF page content.
    What you can do is use one of Adobe's online subscription services. Two provide for PDF  to Word export.
    There's ExportPDF and PDF Pack.
    Be well...

  • How can I convert from Modbus raw data to engineering units using a formula?

    Within Lookout, I have several Modbus numerical input types that do not have a linear corespondence to the Engineering values they represent.  How can I display these values accurately using a formula to convert from the raw data to an engineering value?

    I don't quite understand your reply.  I'm using Lookout 6.0.2, logged in as Administrator, in Edit Mode.  The Modbus object is named RTU06_SAV.  The Active member is 30002 with an alias of SAVfmSMT_RSL.
    Following your instructions, I opened Object Explorer and right-clicked on RTU06_SAV. 
    This opened a menu containing:  Refresh, Cut, Copy, Rename, Delete, Edit connections..., Edit Data Member Configuration, Configure Network Security and Properties.
    I assumed that I should select Edit Data Member Configuration, but maybe I'm wrong. 
    Within Data Member Configuration I can set up Linear Scaling between Raw data and Engineering data.  I know how to do that, but what I need to know is how to convert Raw data to Engineering data using a formula representing a non-linear transformation (such as a converion to a logarithmic value or perhaps a formula derived by fitting the formula to a curve on a calibration chart).
    Once I have this my Engineering data can be represented on a control panel as both a numeric value AND as a correctly reading Gauge.  It can also be properly represented on a HyperTrend graph.
    What do you suggest?

Maybe you are looking for