How can I convert all .fm files into .mif files at one go?

I need to translate a FM12 book that contains 32 chapters = 32 .fm files. Is there any possibility to save all 32 files as .mif files at one go?
And: why does FM12 not remember the last directory I used for saving?
Thx for your answers
Sabine

Hi Sabine,
You can do this with Mif2Go. MIF is not listed as output format on the web-site,
but nevertheless MIF is one of the output options. And Mif2Go is free.
The link is:
Mif2Go converts FrameMaker files to HTML/XML, Help, and Word | mif2go.com
(I do not know why the URL is converted to a descriptive tex automatically; the same below.)
Or the i-frame translation pack (works only in combination with FrameScript):
itl – FrameScript Portal: Convert: FM to MIF / MIF to FM
You might also adapt ExtendScript samples which you can find somewhere, e.g.:
Sample Scripts/Utilities shipped with FrameMaker10 « TechComm Central by Adobe
Best regards
Winfried

Similar Messages

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

How can I convert a mp3 to a text file?

How can I convert a mp3 to a text file?

Agree with dwb
.. and wanted to say hi from my Schnauzer....

How can I convert a Word document into Adobe PDF format?

How can I convert a Word document into Adobe PDF format?

You can use Adobe Acrobat or Adobe CreatePDF.

How can I convert a Slideshow to an .m4v file?

I am trying to convert a slideshow, with audio, created with iDVD to a movie file to transfer into iMovie to be able to post on iWeb. How can I convert to an .m4v file?

You'll have to rip the iDVD disk that you burned with HandBreak or similar app and then import the resulting movie file into iMovie.
OT

How can i convert this data(00000000) into date format(yyyy-MM-dd)

Hi,
i am using this method to convert date format from string.
public static string FormatDate(string inputDate, string inputFormat)
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
string datepresent = DateTime.Now.Date.ToString("yyyy-MM-dd");
return datepresent;
its working properly,
but when input data is like 00000000 i am getting error this is not valid.
how can i convert this into date format any help..!

Have you tried the above code:
I can see it is working with both Date and DateTime destination nodes.
Map:
Functoid Parameters:
Functoid Script:
public static string FormatDate(string inputDate, string inputFormat)
string datepresent;
if (inputDate == "00000000")
datepresent = "0000-00-00";
else
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
datepresent = date.ToString("yyyy-MM-dd");
return datepresent;
Input:
<ns0:InputDateString xmlns:ns0="http://DateFormat.SourceSchema">
<DateString>00000000</DateString>
</ns0:InputDateString>
Output:
<ns0:OutputDate xmlns:ns0="http://DateFormat.DestinationSchema">
<Date>0000-00-00</Date>
</ns0:OutputDate>
If this answers your question please mark as answer. If this post is helpful, please vote as helpful.

How can we create a ABAP object into .ptr file

HI,
How can we create a ABAP object into .ptr/.car/.sar format so that we can give it to a remote client and which can be imported into their R/3 system to get the functionality of this object.

Hello Ramesh
All you need is SAPLINK. Have a look at the following links:
<a href="/people/ed.herrmann/blog/2005/11/14/the-enterprise-and-the-bazaar Enterprise and the Bazaar</a>
<a href="https://sourceforge.net/projects/saplink/">SAPLINK</a>
Regards
Uwe

HT5557 how can you remove all books from books purchased file

how can you remove all ibook from purchased file

When I connected my iPhone, it automatically synced right away. I did click on the iPhone button and saw the contents of my iPhone including the Books. When I clicked that 'Books' button. But since the book in question was not on my iPhone, it did not show up in the list so I could not select it like you suggested. Therefore I could not sync that book to my iPhone. Thanks for the help though.
The good news is I did manage to get the book on to my iPhone.
When her book came out for preorder about a year or two ago, I looked for it in the iTunes store and preordered it. About a week after it came out, I found what was basically the same book for a dollar more. ($7.99 and $8.99) I figured there must be something additional (features) in the $8.99 book. So I bought it too. As far as I could tell though, they were exactly the same. So I decided to hide one of them so they would not both show up in my Library. Anyway, I went to my iTunes/iBooks account and managed the hidden books area. I unhid the Demi book and then it showed up in my iCloud to download on my iPhone. Now they are both on my computer so I need to figure out which one is the other one and hide it. So then I can delete it from my computer just have the one that is on my iPhone on both systems. But at least I found a way to get a copy on my iPhone.

HT2518 After using Migrate Assistant, I made several accounts for every attempt to migrate files from PC to Mac. How can I put all accounts together into one? How can I transfer the files from the other accounts to my primary account?

Okay, so I did the entire Migrate Assistant process to transfer all my files and what not to my MacBook. Problem is that I did it on seperate occasions and now I have several accounts.
How can I transfer my files from the other accounts to my primary account and delete the other accounts?

Problem is that I did it on seperate occasions and now I have several accounts.
If you had read carefully, Migration Assistant asks what you want to do in this event. That would have precluded the redundancy.
Part of the fundamental design of OS X is to separate user accounts so that one user can't interfere with another. It's not possible to directly merge an account with another, but you can copy whatever you need to the Shared folder - it is in your Users folder.
Log in to one account, prefereably a smaller one, and drag the files and folders into Shared. Log out, log into the account you want to be "primary" and drag the files from Shared into their appropriate locations. When you have copied everything you need delete the redundant account.
Do this for each of them.
Or, you can just run Migration Assistant again and follow the prompts that address the situation you described. It involves creating a secondary, temporary account from which you can administer the transfer. When it is complete you delete the temporary account(s).

How can I extract all URL's into a list from 'mm_report' file?

I've Googled this with no luck; I have a 'mm_report' in xml format. It contains a lot of text that also includes approx 800 URL links I need to extract these URLs into a separate list. I've tried using a regular expression: href=\"([^\"]+) in 'Find and Replace' which successfully highlights the links but now need to know how to reverse this process so it deletes [strips] all surrounding text & only leaves me with a list of all URL's in this file.
Any advise, much appreciated.

Hi Hans,
here's an edited version to show just 3 links:
<?xml version="1.0" standalone="yes" ?>
<mm_report>
          <mm_reportname>          ResultsReport.xml</mm_reportname>
          <mm_reportdate>12/08/11 21:29:33</mm_reportdate>
          <mm_reportlocation>E:\\bond\</mm_reportlocation>
          <mm_reportitem>
                    <mm_file>www.mywebsite.com\1.html</mm_file>
                    <mm_displaystr><![CDATA[ <A HREF="javascript:openWindow('http://www.mywebsite.com/1.jpg',630,630)"><IMG...]]></mm_displaystr>
                    <mm_data mm_rangemin="23240" mm_rangemax="23342" mm_filename="E:\mywebsite.html" mm_replaced="false" mm_matchedtextdirty="false" />
          </mm_reportitem>
          <mm_reportitem>
                    <mm_file>www.mywebsite.com\2.html</mm_file>
                    <mm_displaystr><![CDATA[ <A HREF="javascript:openWindow('http://www.mywebsite.com/2.jpg',630,630)"><IMG...]]></mm_displaystr>
                    <mm_data mm_rangemin="23240" mm_rangemax="23342" mm_filename="E:\mywebsite.html" mm_replaced="false" mm_matchedtextdirty="false" />
          </mm_reportitem>
          <mm_reportitem>
                    <mm_file>www.mywebsite.com\3.html</mm_file>
                    <mm_displaystr><![CDATA[ <A HREF="javascript:openWindow('http://www.mywebsite.com/3.jpg',630,630)"><IMG...]]></mm_displaystr>
                    <mm_data mm_rangemin="23240" mm_rangemax="23342" mm_filename="E:\mywebsite.html" mm_replaced="false" mm_matchedtextdirty="false" />
          </mm_reportitem>
          <mm_reportitem>
                    <mm_file>www.mywebsite.com\4.html</mm_file>
                    <mm_displaystr><![CDATA[ <A HREF="javascript:openWindow('http://www.mywebsite.com/4.jpg',630,630)"><IMG...]]></mm_displaystr>
                    <mm_data mm_rangemin="23240" mm_rangemax="23342" mm_filename="E:\mywebsite.html" mm_replaced="false" mm_matchedtextdirty="false" />
          </mm_reportitem>
</mm_report>
I would like this to return just:
http://www.mywebsite.com/1.jpg
http://www.mywebsite.com/2.jpg
http://www.mywebsite.com/3.jpg
Thanks.

I am moving all my iphoto pictures to seperate folders outside of iphoto. I have found iphoto slighlty cumbersome. After I move all pictures from iphoto to a separate file how can I delete all the iphoto photos without deleting the ones in the file?

I am moving all of my iphoto pictures into seperate folders becuase iphoto is great, but a bit cumbersome when I need to transfer all the pictures to a external drive.
1) After I move all pictures, how can I delete the iphoto pictures without destroying the ones I have in files
2) how can I ensure that I have sucessfully captures all the iphoto files so when I delelte from iphoto I have not forgotten any
3) is there a way to determine what duplicate pictures I have?
Thanks!

If you Control click on the iPhoto Library, you'll see a list of folders - one named "Masters". Inside of this folder are all of your original, high-res photos. You can copy them to other folders if you like.
You can't delete iPhoto pics without deleting the ones in the iPhoto Library.
You can copy all of your Masters pics out of the Library, ensuring that you won't forget any.
I don't know of anyway to determine if there are duplicate photos - most (if not all) have a unique name assigned.
Good luck,
Clinton

How can I print a LabView-Blockdiagram into a file?

Hello,
I'd like to print a Blockdiagram into a file to insert it into a
Word-Document. How can I do this best? (I don't need a function that
does it automatically for me in LabView!)
Thanks!

RMy wrote:
> I prefer to make a screen dump (Alt+PrintScrn) and paste picture into
> my document. Alternative: Print to a .rtf-file. Problem is with large
> blockdiagrams that doesnt fit into one page. Solutions?
Maybe installing a hpgl-driver and print to a file.
Download the hpgl-graphics filter from microsoft (was included until
Office 95 i think) and import it to the word-document.
You'll lose the colors this way (as far as i remember).
Use a postscript printerdriver to print to a file. Convert it to
something, you can import to your application.
Use a pdf-printerdriver. But I don't know how you can import graphics
from pdf (a subset of postscript) to other applications.
Print to PostScript-File, use ImageMagick's "convert" program to conver
t
it to something userful for you and import it.
These are my ideas...
bye
Marco

How can I convert a Java program into a screen saver ?

I want to write a screen saver in Java, which is to be run under Window 95 platform. However, I don't know how to convert a .class file into a .scr file ?

A SCR File is just an renamed exe file. So what you need is an CLASS2EXE converter (there are some around) and than simply rename the file to scr.
Dont forget the special parameters scr files have, like /s or /c for config...look up in google for those.

How can I convert OPENGL canvas graphics into bitmap image format.

I used the following code... but no conversion made... plz tell the write way..
public static void savePaintingJPG(GLCanvas canvas, String fileName) {
        // saves the content of the 'panel' in a file 'file'.jpg
        String name = "";
int framewidth = canvas.getSize().width; // get the canvas' dimensions
int frameheight = canvas.getSize().height;
System.out.println(framewidth);
System.out.println(frameheight);
java.nio.ByteBuffer pixelsRGB = BufferUtils.newByteBuffer(framewidth * frameheight * 3); // create a ByteBuffer to hold the image data
GL gl = canvas.getGL(); // acquire our GL Object
      // read the Frame back into our ByteBuffer
gl.glReadBuffer(GL.GL_BACK);
gl.glPixelStorei(GL.GL_PACK_ALIGNMENT, 1);
gl.glReadPixels(0, 0, framewidth, frameheight, GL.GL_RGB, GL.GL_UNSIGNED_BYTE, pixelsRGB);
int[] pixelInts = new int[framewidth * frameheight*3];       // Convert RGB bytes to ARGB ints with no transparency. Flip image vertically by reading the
     // rows of pixels in the byte buffer in reverse - (0,0) is at bottom left in OpenGL.
int p = framewidth * frameheight * 3; // Points to first byte (red) in each row.
     int q;   // Index into ByteBuffer
int i = 0;   // Index into target int[]
int w3 = framewidth*3;    // Number of bytes in each row
for (int row = 0; row < frameheight; row++) {
    p -= w3;
    q = p;
    for (int col = 0; col < framewidth; col++) {
      int iR = pixelsRGB.get(q++);
      int iG = pixelsRGB.get(q++);
      int iB = pixelsRGB.get(q++);
      pixelInts[i++] = 0xFF000000 | ((iR & 0x000000FF) << 16) | ((iG & 0x000000FF) << 8) | (iB & 0x000000FF);
        BufferedImage bimg = new BufferedImage(framewidth,frameheight,BufferedImage.TYPE_INT_ARGB);
          bimg.setRGB(0,0,framewidth, frameheight, pixelInts, 0, framewidth);
        try
            File imageFile = new File("final.jpg");
            File imagf = new File("final.png");
            File image = new File("final.bmp");
            ImageIO.write(bimg, "jpg", imageFile); // saves files
            ImageIO.write(bimg, "png", imagf);
            ImageIO.write(bimg, "bmp", image);
               System.out.println("Success");
        catch (IOException e) {
            e.printStackTrace();
    }

You want to convert it to an array of what? Of numbers? Of LabVIEW colors?
The "Read BMP File.vi" VI outputs a 1-D array of the pixels, but I suspect it is not exactly in the format that you need. I am NOT sure, but I think that each group of 3 elements of that 1-D array (which is inside the cluster "image data" that the VI outputs) represents the red, green and blue levels of a single pixel (but it may be hue, saturation and lum.). Also, since it is a 1-D array, you would have to divide it by the width (which is also included in the "image data" cluster) to get some sort of 2-D array of data.
You can find the "Read BMP File.vi" VI in the functions palete> "Graphics & sound">"Graphics Formats".

How can I convert all .fm files into .mif files at one go?

Similar Messages

Maybe you are looking for