How can I convert borland pascal 6-byte real value to labview type

while attempting to convert a 6-byte borland pascal real number to a LabVIEW data type, I get strange results. Does anyone have previous experience with this?

Your problem may be in how the two different environments store the number. I'm not sure how 6-byte pascal number is stored - here is some info on how doubles are stored in LabVIEW.
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/370dfc6fd19b318c86256a33006bfb78?OpenDocument
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Similar Messages

How can I convert an array off byte into an Object ?

Hi folks...
I�m developing an application that comunicates a PDA and a computer via Wi-Fi. I�m using a DataStream ( Input and Output ) to receive / send information from / to the computer. Most off the data received from him is in the byte[] type...
How can I convert an array off byte ( byte[] ) into an Object using MIDP 2.0 / CLDC 1.1 ?
I found on the web 2 functions that made this... but it uses a ObjectOutputStream and ObjectInputStream classes that is not provided by the J2ME plataform...
How can I do this ?
Waiting answers
Rodrigo Kerkhoff

There are no ObjectOutputStream and ObjectInputStream classes in CLDC. You must know what you are writing to and reading from the DataStream. You should write the primitives like int, String to the DataOutputstream at one end and read those in exactly the same sequence at the outher end using readInt(), readUTF() methods.

How can I convert (or switch) the RGB percent values from the LR histogram into RGB values which are shown e. g. in PS/CameraRAW?

In LR 5.5 (same in previous versions) the RGB values in the histogram are shown in percent (relativ) values. I prefere to see the absolute values, but I can`t find any way to switch. Maybe this option is intentional disabled, because LR works in 16-Bit mode this would result in values up to 2^16. But as i compared the relativ values from LR with the absolute values from PS i run into a conversion problem. The following example shows the differences:
CameraRAW : RGB, 128,0,0
Lightroom: RGB, 43,8%, 19,0%, 6,2%
CameraRAW: RGB, 0,128,0
Lightroom: RGB, 29,8%, 47,5%, 17,5%
Mainly i have two questions:
1. Is there any possibility to change the percent RGB values in LR to absolut values?
2. How can i convert CameraRAW values to LR values (see above)?

TThe reason that a design decision was made from the beginning of LR to show only the percentage values was that RGB values are dependent on the color space and the LR histogram and numerical readout are derived from the Develop module's display space which is a hybrid color space with ProPhoto RGB primaries and the sRGB TRC. Thus the numerical values in the display would be different from the exported RGB image (in an orthodox space) and it was feared that this would be misleading. When soft proofing was introduced, because it involved converting the display to an orthodox space, it became possible to use the 0-255 scale in that mode.

How can I convert a bitmap image into an array in LabVIEW 6.0.2, then to a spreadsheet for further analysis without NI-IMAQ or Vision?

I do not have NI-IMAQ or NI Vision.
I acquired the image using a picolo board then just saved it as a bitmap file.

You want to convert it to an array of what? Of numbers? Of LabVIEW colors?
The "Read BMP File.vi" VI outputs a 1-D array of the pixels, but I suspect it is not exactly in the format that you need. I am NOT sure, but I think that each group of 3 elements of that 1-D array (which is inside the cluster "image data" that the VI outputs) represents the red, green and blue levels of a single pixel (but it may be hue, saturation and lum.). Also, since it is a 1-D array, you would have to divide it by the width (which is also included in the "image data" cluster) to get some sort of 2-D array of data.
You can find the "Read BMP File.vi" VI in the functions palete> "Graphics & sound">"Graphics Formats".

How can i convert an object to stream of chars or bytes?

how can i convert an object to stream of chars or bytes?

One way is the serialization mechanism. There are examples and explanations of it in the Java tutorial: http://java.sun.com/docs/books/tutorial/essential/io/serialization.html

How can I convert stream to byte and byte to stream

I got a IInputStream from BackgroundDownloader operation, how can I convert it to byte array? I try to convert it to buffer and after that to bytes, but it's always throw exception.
function decryptStream(inputStream, totalBytes) {
var reader = new Windows.Storage.Streams.DataReader(inputStream);
var iBuffer = reader.readBuffer(totalBytes);
var bytes = Windows.Security.Cryptography.CryptographicBuffer.copyToByteArray(iBuffer);
Could I have examples about that?

Hi Jeft,
In my program, I have a BackgroundDownloader to download an image. When we have result, I will convert it to bytes array.
if (p.hasResponseChanged && imageStream == null) {
imageStream = operation.getResultStreamAt(0);
if (!p.hasResponseChanged && imageStream != null) {
decryptStream(imageStream, p['bytesReceived']);

How can I convert output data (string?) from GPIB-read to an 1D array?

Hello all,
I am reading a displayed waveform from my Tektronix Oscilloscope (TDS3032) via the GPIB Read VI. The format of the waveform data is: positive integer data-point representation with the most significant byte transferred first (2 bytes per data point).
The output data of GPIB-Read looks like a string(?) where the integer numbers and a sign like the euro-currency sign are seperated by spaces e.g. #5200004C3 4 4 4 4 3C3C3........ (C represents the euro-currency sign).
How can I convert this waveform data into a 1D/2D array of real double floatingpoint numbers (DBL) so I can handle the waveform data for data-analysis?
It would be very nice if someone know the solution for this.
t
hanks

Hi,
First of all, I'm assuming you are using LabVIEW.
The first you need to do is parse the string returned by the instrument. In this case you need to search for the known symbols in the string (like the euro sign) and chop the string to get the numeric strings. Here are some examples on parsing from www.ni.com:
Keyword Search: parsing
Once you parse the numeric strings you can use the "String/number conversion VIs" in the String pallette.
Hope this helps.
DiegoF.Message Edited by Molly K on 02-18-2005 11:01 PM

How can I convert string to the record store with multiple records in it?

Hi Everyone,
How can I convert the string to the record store, with multiple records? I mean I have a string like as below:
"SecA: [Y,Y,Y,N][good,good,bad,bad] SecB: [Y,Y,N][good,good,cant say] SecC: [Y,N][true,false]"
now I want to create a record store with three records in it for each i.e. SecA, SecB, SecC. So that I can retrieve them easily using enumerateRecord.
Please guide me and give me some links or suggestions to achieve the above thing.
Best Regards

Hi,
I'd not use multiple records for this case. Managing more records needs more and redundant effort.
Just use single record. Create ByteArrayOutputStream->DataOutputStream and put multiple strings via writeUTF() (plus any other data like number of records at the beginning...), then save the byte array to the record...
It's easier, it's faster (runtime), it's better manageable...
Rada

How can I convert an int to a string?

Hi
How can I convert an int to a string?
/ad87geao

Here is some the code:
public class GUI
    extends Applet {
public GUI() {
    lastValue = 5;
    String temp = Integer.toString(lastValue);
    System.out.println(temp);
    showText(temp);
private void showText(final String text) {
    SwingUtilities.invokeLater(new Runnable() {
      public void run() {
        tArea2.setText(text + "\n");
}

How can I convert an InputStream to a FileInputStream ???

How can I convert an InputStream to a FileInputStream ???

Thanks for you reply, however, I am still stuck.
I am trying to convert my application (which runs smoothly) to a signed applet. The following is the original (application) code:
private void loadConfig() {
String fileName = "resources/groupconfig";
File name = new File(fileName);
if(name.isFile()) {
try {
     ObjectInputStream in = new ObjectInputStream(new FileInputStream(fileName));
     pAndGConfig = (PAGroupsConfig)in.readObject();
     in.close();
     return;
} catch(ClassNotFoundException e) {
     System.err.println("++ERROR: "+e);
} catch(IOException e) {
     System.err.println("++ERROR: "+e);
System.out.println("Can't find file: " + fileName);
Because all code and resources now reside in a Jar file (for the signed applet), I must use the following line to access the resources:
InputStream is = this.getClass().getResourceAsStream(fileName);
I then need to convert the 'InputStream' to 'ObjectInputStream' or 'FileInputStream' so that I can work with it.
I would be very grateful if you could help shed some light on the matter - Cobram

How can I convert an OVM vm (.img) to VDI (virtualbox)?

Hi,
how can I convert an OVM vm (.img) to VDI (virtualbox)?
Is .img format a raw image? If yes can I use "VBoxManage convertdd" to convert from .img to vdi?
tnx & regards,
S.

Hi,
"VBoxManage convertdd" solved.
Regards,
S.

How can I convert an AUDIO MPEG-4 to an MPEG3 format? I need it for a Powerpoint Presentation

How can I convert an AUDIO MPEG-4 to another type of file, such as MPEG3 or mp3

Use Handbrake.
You can download it for free from this site:
http://www.macupdate.com/info.php/id/12987/handbrake
Good luck

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

How can I convert a class file to Exe file

hai
How can I convert a class file to Exe file

Please search the forums before asking questions - this has been answered hundreds (really!) of times.

How can I convert multiple files at one time and not one at a time

How can I convert multiple files at one time and not one at a time

Hi Plissey1950,
Sorry for the lengthy delay to a response. Are you trying to convert multiple files to individual PDF files at the same time? (not combine them). If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
Thanks,
David

How can I convert borland pascal 6-byte real value to labview type

Similar Messages

Maybe you are looking for