How can I convert from 8.2.1 to 7.1.1?

I would like to convert the following files from 8.2.1 to 7.1.1. Is this possible without just having someone else do it inside 8.2? If not, then can someone please convert them for me? They are listed in order of most needed. Thanks for the help.
Attachments:
Single_Temp_RampPID_Ver1.vi ‏89 KB
PiezomotorControl version2.vi ‏41 KB
PiezomotorControl.vi ‏48 KB

Somebody needs to to the 8.0 to 7.1 conversion inside 8.0. Here's my attempt, see if they work.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Piezo71.zip ‏123 KB

Similar Messages

How can I convert from color balance in FCE to color balance in FCPX?

Let me start off by saying that I've been having an issue with a project in Final Cut Express - a project I'd put a lot of time into and thought I was finished with. Before continuing on, I encourage you to take a look at my other thread: https://discussions.apple.com/message/18702933?ac_cid=op123456#18702933
Realizing that there may be no one who can walk me through fixing my project as is, I decided to download a trial version of Final Cut Pro X and see if I could replicate my project there and have more success (after all, it was only a matter of time before I switched anyway).
So, in my original project in FCE, I keyed a lot of frames with different color balances. I downloaded the Ripple Training color balance effect to do just that, but the sliders are set up differently. In FCE, they range from -1 to 1. In FCPX, they range from 0 to 1. I'm wondering how I can conveniently convert the values from FCE to FCPX. Being terrible at math has made this much harder.
Just by drawing a diagram, like the following, I can figure out the basics:
FCE
[-1]-----[-.5]-----[0]-----[.5]-----[1]
is equal to:
FCPX
[0]-----[.25]-----[.5]-----[.75]-----[1]
Since I have very specific numbers, not all of which can be easily converted using a basic diagram like the one above, I definitely need some help here. For example, one of the values in FCE is .77. What would that be equal to in FCPX? It's probably something simple, but like I said, I'm stupid when it comes to math.
Thanks to anyone who can provide me with some help here, although I still hope that I'll end up having no reason to redo everything in FCPX.

Well, the "math answer" is .885…but I'm afraid that's not likely to be of much help. FCPX and FCE have absolutely nothing in common, including filters land color correction. So even if you sent the time comverting all your numeric values, I'm guessing you'll wind up with a mess and be very frustrated with all the time wasted in the workaround.
If I read your original FCE thread correctly, I if it were my project., I'd do a test on a short clip in X to see whether yoi can the effects and quality you expect. If you can, great. Build you project from scratch and learn a new NLE at the same time.
Good luck.
Russ

How can I convert from Modbus raw data to engineering units using a formula?

Within Lookout, I have several Modbus numerical input types that do not have a linear corespondence to the Engineering values they represent. How can I display these values accurately using a formula to convert from the raw data to an engineering value?

I don't quite understand your reply. I'm using Lookout 6.0.2, logged in as Administrator, in Edit Mode. The Modbus object is named RTU06_SAV. The Active member is 30002 with an alias of SAVfmSMT_RSL.
Following your instructions, I opened Object Explorer and right-clicked on RTU06_SAV.
This opened a menu containing: Refresh, Cut, Copy, Rename, Delete, Edit connections..., Edit Data Member Configuration, Configure Network Security and Properties.
I assumed that I should select Edit Data Member Configuration, but maybe I'm wrong.
Within Data Member Configuration I can set up Linear Scaling between Raw data and Engineering data. I know how to do that, but what I need to know is how to convert Raw data to Engineering data using a formula representing a non-linear transformation (such as a converion to a logarithmic value or perhaps a formula derived by fitting the formula to a curve on a calibration chart).
Once I have this my Engineering data can be represented on a control panel as both a numeric value AND as a correctly reading Gauge. It can also be properly represented on a HyperTrend graph.
What do you suggest?

How can i convert from alac to mp3 and export to artist/album hierarchy

I am trying to populate a 32GB SD Card with music to listen to in my car. My itunes library is largely in apple lossless format, but the car stereo does not play that format.
I have created a playlist of all of the music I'd like to have on the SD Card (but its in apple lossless format).
So what I'd like to do is:
a)     Bulk convert a large number of apple lossless files to MP3.
b)     Export the MP3 files to an external Finder folder, organized in Artist/Album hierarchy
c)     Delete the MP3 files from the itunes library so as to have just the apple lossless version maintain in the itunes library
Sounds pretty simple, but I'm having a devil of a time trying to figure it out.
I can find a way to do the conversion and export the MP3 files (and subsequently deleted from the itunes library), but they will not be organized by Artist/Album in the Finder folder.
Similarly, I can export a bunch of files from itunes to a Finder folder and have it be organized by Artist/Album.
I just can't do one followed by the other.
I suppose this would also work if instead of exporting the newly created MP3 files, it would establish a new playlist in itunes with these. Then, I could just export them and have them then organized by Artist/Album; and then I could delete all of the MP3 files in the playlist.
Any thoughts or ideas on how to accomplish this goal? (I do know the manual way of doing this, but am trying to figure out a faster, more elegant way).
M

I ask because you wrote, "I just can't do one followed by the other".
You can. Just do one followed by the other.
Convert the files to mp3.
Put them all into a playlist. A smart playlist with Kind is MP3 and added in last one day will do it for you.
Select the songs in teh smart playlist
Run Export to Album Folders script.
Select all the songs in the playlist then Command Delete to remove them from iTunes.

How can I convert from .wmv format to one that AppleTV will play?

I am a Windows user and I want to convert .wmv files to a format that will play on my AppleTV and 5th generation iPod. I don't think that QuickTime Pro will do this.
What are the best solutions to convert video from various formats to the format that is needed for my AppleTV and iPod?
Thanks,
Rob

suikris wrote:
right, haven't noticed that... why did i assume that people talking about apple tv and handbrake would be using macs?
never assume. handbrake is available for windows just like itunes, so you could easily use ATV without ever having a mac.

How can i convert a .img disk image to a .dsk disk image?

I own an intel-iMac running MacOS 10.5.6.
I own both an Apple //c and Apple System Disk 4.0.2.
I now have an emulator called Virtual ][.
I also have a disk image of the Apple System Disk 4.0.2,
but it is in the .img format. I need it to be in the .dsk
format so the emulator can "see" the disk and run it.
How can I convert from .img to .dsk?
Thanks,
Apple //GS

have a look here:
http://discussions.apple.com/thread.jspa?threadID=246070

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
The answer depends on the type of video files you want to convert. If they are DRM protected commercial videos, no help can be given here. Google.

How can I convert output data (string?) from GPIB-read to an 1D array?

Hello all,
I am reading a displayed waveform from my Tektronix Oscilloscope (TDS3032) via the GPIB Read VI. The format of the waveform data is: positive integer data-point representation with the most significant byte transferred first (2 bytes per data point).
The output data of GPIB-Read looks like a string(?) where the integer numbers and a sign like the euro-currency sign are seperated by spaces e.g. #5200004C3 4 4 4 4 3C3C3........ (C represents the euro-currency sign).
How can I convert this waveform data into a 1D/2D array of real double floatingpoint numbers (DBL) so I can handle the waveform data for data-analysis?
It would be very nice if someone know the solution for this.
t
hanks

Hi,
First of all, I'm assuming you are using LabVIEW.
The first you need to do is parse the string returned by the instrument. In this case you need to search for the known symbols in the string (like the euro sign) and chop the string to get the numeric strings. Here are some examples on parsing from www.ni.com:
Keyword Search: parsing
Once you parse the numeric strings you can use the "String/number conversion VIs" in the String pallette.
Hope this helps.
DiegoF.Message Edited by Molly K on 02-18-2005 11:01 PM

I have some documents from apple works from OSX how can I convert them in Pages in OS Maverick? Thanks Harold

How can I convert documents from apple works to pages in OSX Mavericks? Harold

If you're using a version of Pages prior to 5.0, it can import AppleWorks 6 word processing documents directly. Otherwise, reopen them in AppleWorks and export them in a format that Pages can read; for Pages 5.0, those are listed here.
(107827)

How can I convert (or switch) the RGB percent values from the LR histogram into RGB values which are shown e. g. in PS/CameraRAW?

In LR 5.5 (same in previous versions) the RGB values in the histogram are shown in percent (relativ) values. I prefere to see the absolute values, but I can`t find any way to switch. Maybe this option is intentional disabled, because LR works in 16-Bit mode this would result in values up to 2^16. But as i compared the relativ values from LR with the absolute values from PS i run into a conversion problem. The following example shows the differences:
CameraRAW : RGB, 128,0,0
Lightroom: RGB, 43,8%, 19,0%, 6,2%
CameraRAW: RGB, 0,128,0
Lightroom: RGB, 29,8%, 47,5%, 17,5%
Mainly i have two questions:
1. Is there any possibility to change the percent RGB values in LR to absolut values?
2. How can i convert CameraRAW values to LR values (see above)?

TThe reason that a design decision was made from the beginning of LR to show only the percentage values was that RGB values are dependent on the color space and the LR histogram and numerical readout are derived from the Develop module's display space which is a hybrid color space with ProPhoto RGB primaries and the sRGB TRC. Thus the numerical values in the display would be different from the exported RGB image (in an orthodox space) and it was feared that this would be misleading. When soft proofing was introduced, because it involved converting the display to an orthodox space, it became possible to use the 0-255 scale in that mode.

How can I convert my logo 300dpi (274 pixels wide) from EPS to Gif format?

I have a logo that needs to be fixed for web purposes. It looks great in print but very poor quality on screen. I need one for my website and HTML email newsletters, along with a high quality GIF 300 DPI (274 pixels wide) for a HTML coded signature. I tried it in Photoshop to save this file as GIF format. But it seems my files is 274 pixel but it is 96 dpi rather than 300dpi. How can I convert it from EPS to 300 DPI (274 pixels wide) GIF file format??
I have an EPS file for it. Can anyone please help me ? Here is the LINK

If your logo is 274 pixel wide at 300DPI it will print .9" wide. DPI is meaningless for the web For displays and displaye drivers do not use the image file dpi setting. Displays are run at one resolution normally their manufactured pixel resolution. Display these days are manufactured with resolution ranging from 96PPI to over 300PPI so your logo will display 2.8" wide on a low 96ppi resolution display and .9" wide on a high 300ppi resolution display. The the difference between Jpeg and Gif is color Jpeg supports 8Bit color so 16M colors but does not support transparency. GIF only supports 256 mapped colors reduced to 255 colors it you want transparent empty pixels. You can also use PGN format which supports transparency and 8 or 16 bit color.

How can I convert datalog files from LV5.0 to LV6i?

I have some datalog files from LV5.0 and I'd like to use them in LV6i, but when although I push convert when asked in the moment of reading the file,it provides input parameter invalid when reading. I'm using the same vi I used to create and read them in LV5, so it's not supposed to be a program mistake. How can I convert them?"

Hello,
Thanks for answering my question. I downloaded LV6.02 as you suggested but the problem persists.
I don't know maybe it's something very simple. I have attached 1 program to read the datalog file and another one that reads it in every version (LV5.0 and LV6.02) in case you can help me.
Thanks again,
Javi
Attachments:
WriteLV5.vi ‏65 KB
OpenLV5.vi ‏74 KB
OpenLV6.vi ‏59 KB

How can I convert a Database Handle from TestStand to LabVIEW?

I want to use a Database Handle (already created in TestStand by an Open Database step) in a LabVIEW-VI (called from TestStand) to connect it with the "Connection Reference" input of the "Easy SQL.vi"? If I use a directly connection via the "TestStand - Get Property Value (Number).vi" I get back the error message 4101 in LabVIEW. How can I convert the Database Handle?
Test Engineering
digades GmbH
www.digades.com

The TestStand database step types use the CVI SQL Toolkit to talk to databases. The handle that you are referencing is an internal memory location and not a actual handle that you can directly use. Currently as implemented the handle that is stored in a numeric TestStand property for the connection and the SQL statement are the handle values returned from the CVI SQL Toolkit. So for the connection handle, you could call the CVI SQL Toolkit function
DBGetConnectionAttribute (
int Connection_Handle,
tDBConnectionAttr Attribute,
void *Value);
and get the CVI CAObjHandle reference. With this you could then call the CVI ActiveX function
CA_GetInterfaceFromObjHandle(
CAObjHandle Object_Handle,
const IID *Interface_Id,
int Force_AddRef,
void *Inte
rface_Ptr,
int *Did_AddRef);
to get the actual ActiveX interface reference. This would have to be converted into a LabVIEW reference.
You may want to consider just using LabVIEW to open a new parallel reference only using the toolkit.
Scott Richardson
National Instruments

How can I convert a space from ABAP to CSV data?

Hello guys,
how can I convert a string like
"This is a%test%"
to
"This is a test "
into CSV data?
I try to with   REPLACE ALL OCCURRENCES OF '%' IN string_above WITH space,
but I got the string without space, like
"This is atest"
I read some posts that CSV will ignore space.
But which kind of symbol in CSV represents space?
Thanks for any suggestion!
Regards,
Liying

USE THE CODE AS SHOWN BELOW...
TYPES : BEGIN OF tp_data,
          line(4096),
        END   OF tp_data.
*&      Form gui_upload
      Upload the data from the input file to the internal table
FORM gui_upload.
*--Local data declaration
DATA: l_filename_ip TYPE string,
        tl_data       TYPE STANDARD TABLE OF tp_data WITH HEADER LINE.
l_filename_ip = p_input.
*--Upload Data
CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
            filename                = l_filename_ip
            filetype                = 'ASC'
            has_field_separator     = ''
       TABLES
            data_tab                = tl_data
       EXCEPTIONS
            file_open_error         = 1
            file_read_error         = 2
            no_batch                = 3
            gui_refuse_filetransfer = 4
            invalid_type            = 5
            no_authority            = 6
            unknown_error           = 7
            bad_data_format         = 8
            header_not_allowed      = 9
            separator_not_allowed   = 10
            header_too_long         = 11
            unknown_dp_error        = 12
            access_denied           = 13
            dp_out_of_memory        = 14
            disk_full               = 15
            dp_timeout              = 16
            OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID   sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    IF sy-subrc = 1.
      MESSAGE e000 WITH text-e04.
    ENDIF.
ELSE.
    LOOP AT tl_data FROM 2.
*--Taking the contents of the input file leaving the header part
      PERFORM split_and_save USING tl_data-line.
    ENDLOOP.
ENDIF.
ENDFORM.                    " gui_upload
*&      Form split_and_save
      Splitting the contents from the input file and saving them into
      an internal table
     -->P_TL_DATA_LINE text
FORM split_and_save USING fp_data.
*--Local data declaration
DATA : tl_data TYPE STANDARD TABLE OF tp_data WITH HEADER LINE,
         l_type TYPE c,
         c_space(1) TYPE c VALUE ' '.
*--Split at the Comma
SPLIT fp_data AT c_space INTO TABLE tl_data.
CLEAR inputtab.
*--Move it to the target fields
DO.
    ASSIGN COMPONENT sy-index OF STRUCTURE inputtab TO <fs_field>.
    IF NOT sy-subrc IS INITIAL.
      EXIT.
    ENDIF.
*--Extract source data
    CLEAR tl_data.
    READ TABLE tl_data INDEX sy-index.
*--Populate the target
    <fs_field> = tl_data-line.
ENDDO.
*--Append this record
APPEND inputtab.
ENDFORM.                    " split_and_save
In the above code u can use make inputtab like tp_data and get the result as requires in an internal table as space seperated fields.
In place of space u can also use any other symbol.
And after that u can replace all occurences of space with the comma by using the statement that u have written below.

How can I convert from 8.2.1 to 7.1.1?

Similar Messages

Maybe you are looking for