How can I convert Pagemaker 7.0 file to InDesign CS5.5?

I have problem with open pagemaker file to InDesign CS5.5. Before I was using PageMaker 7.0. Now I have InDesign CS5.5 & tried to convert my old file to InDesign. But I am having problem to convert. When I convert Pagemaker File, all text looks uncleare and unredable. I can't edit text and tables. Below is a image after converting from pagemaker.

Start by reading the InDesign Help section on opening PageMaker files. It suggests some steps to do IN PAGEMAKER BEFORE you do the conversion:
•If the PageMaker file or its linked graphics are located on a network server, floppy disk, or removable drive, it may not open as expected if an interruption in data transfer occurs. To prevent data transfer problems, copy documents and their links to the hard disk, preferably in the same folder where the PageMaker publication is stored, before opening them in InDesign.
•You may want to use Save As in PageMaker to clear unnecessary hidden data.
•To ensure that all links are maintained, copy all linked files to the same folder where the PageMaker publication is stored.
•Make sure that all necessary fonts are available in InDesign.
•Repair broken graphics links in the PageMaker publication.
•If you have a problem converting a large PageMaker document, convert portions of the PageMaker file separately to isolate the problem.

Similar Messages

How can I convert the ringtone (m4r file) I made into an mp3 file on itunes?

How can I convert the ringtone (m4r file) that I made into an mp3 file on iTunes? I want to put it on a CD, but I can't figure out how to convert it. I didn't buy it, I made it by converting a YouTube video into an mp3 (I wanted to get the little song in the video for a ringtone.) I'm not sure what to do.

Hello ed2345,
Thanks for the help, but this is not the problem.
It's hard to describe the problem, but I'll try it again, this time with pictures.
I was left with the following folders in the iTunes Downloads folder.
http://www.picfront.org/d/7yb3
These TMP Folders have a download.m4a and a Info.plist file.
After moving the audio files in iTunes a bit I get this.
http://www.picfront.org/d/7yb2
As you can see no other Information for the download.m4a than the length.
That's how the .m4p file looks like
http://www.picfront.org/d/7yb1
And this is how the same .m4a file currently looks
http://www.picfront.org/d/7yb0
Like I said, I could edit all these download.m4a files by myself but that would leave some information out.
Note: Sorry, I hope the links do not spam you with annoying ads. I don't get any but I was told that there can be some annoying one.

How can I convert a dBase IV file to Excel on my MAC computer??

How can I convert a dBase IV file to Excel on my MAC computer??
I downloaded the DoxBox program which enables me to use DOS programs such as dBase in my new MAC computer and it does work nicely!!

This is what Excel now imports:

How can I convert the ITHMB photo files to PC readable format like JPEG?

How can I convert the ITHMB photo files on my new Iphone 4s to a PC readable format like JPEG

Look at the link and follow instructions to convert the file taken from a different thread in this forum:
https://discussions.apple.com/thread/2640386?start=0&tstart=0

How can I convert a PDF/A file into a PDF file with Acrobat Pro X?

How can I convert a PDF/A file into a PDF file with Acrobat Pro X? I'd like to modifiy the file which I have only as a PDF/A.

There's two answers if you want to modify the file:
You can temporarily turn off PDF/A Mode in your preferences, so they don't open as read-only. The problem would be if you do something to the file that violated the PDF/A standard, so you should always run a Preflight check afterwards to make sure.
If you want to remove the PDF/A header tag, use Preflight again - it's on the Print Production Panel in Acrobat X Pro (which may be hidden, use the options menu on the Tools Pane to show it). There's a profile called "Remove PDF/A information" - choose this and press Analyze and Fix. Nothing else about the file will be altered but when you save and reopen it all the editing tools will become active.

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

How can i convert 2k resolution dpx files of a movie to DCP and will they be able to open the harddisk and view the files?

how can i convert 2k resolution dpx files of a movie to DCP and will they be able to open the harddisk and view the files?

AFAIK, this is beyond the capabilities of FCPX/Compressor. This company makes a plug-in, which I have to say I have no experience with. Here is a thread that may give you some other ideas. Good luck.
Russ

Problems importing PageMaker 6.52 file into InDesign CS5

I have an 11-year old file that I need to import into either InDesign CS5 or FrameMaker 9 on Windows 7. The file was originally done on a Mac, so it had no extension. I have tried adding the .PM6 extension, but when that didn't work, I tried the .P65 extension. I know from the PDF properties that the file was done in PageMaker 6.52, but I don't have PageMaker, and neither does the original author at this point.
When I try to import the file into InDesign CS5, I get this message: "The PageMaker document is damaged and cannot be recovered." (Note that I am using CS5, not CS2, so the issues I've seen posts about should not apply.)
When I try to impor the file into FrameMaker 9, I get this message: "The filter encountered an error and could not complete the translation."
I could try converting the PDF, but I'd like to get this file converted if that is possible.
I am posting this in the FrameMaker forum as well to see if they may have any insights.
Tammy

It could well be that the error message is accurate and the file is damaged.
If you’re on Windows you could download the PM 7 trial and try opening it with that. If that works, resave the file and then move it to InDesign.
BTW, you keep saying import. InDesign cannot import a PM file, it can only open them.
Bob

How can I convert and replace SDII files to WAV files in a song?

I have to convert some audiofiles in a song from 16 to 24 bit and from SDII to WAV. I choose the option "Copy/convert files" in the audio window and everything is converted well.
In my audio window I have now 16 and 24 bit files and WAV and SDII files.
But how can I replace those new files in my song?
On logic 6.4.3 I could after "Copy/convert files" choose the option "Change file reference(s) in the song to the audiofile(s) that have been copied", but in my new Logic 7.1.1 I don't have that possibility anymore.
What am I'm doing wrong? I'm copying my new audio in new folders.
G5 dual 2,7 Mac OS X (10.4.3) Protools HD3 Accel, 192, 96i (2x)

set sample rate to original sample rate

How can I convert an outlook pst file to mac mail without using a windows based computer

I recently bought the new iMac as my older Windows based computer crashed with a bad motherboard. I have been trying to find a way to convert Outlook 2007 pst files to Mac Mail without the need to use a Windows based computer since all I have now is a Mac. I have the copies of the pst files on my Mac, so I am looking for the most efficient way to convert them to the format that I can then open them in the Mac Mail. Any suggestions would be greatly appreciated.

Hi - thanks for the instructions but where do you get the option for Quicktime. If I do File - Export I only get the options for File name, place and size but no option that allows to select quicktime:-(
Have you got any more tips?

How can I convert a DSS dictation file to mp3?

Am new to using a Mac and my last place of work I used a PC with Speechexec dictation software. I need to convert some of the old dictation files to play on either QuickTime or iTunes etc. Anyone any idea?

I would like to validate and recommend the solution mentioned by Mark Dachille. I, too, have conducted extensive Google searches to find software which can convert Olympus DSS audio-formatted files to mp3, only to discover that there is no such animal out there. NCH Software offers Switch, but if you check out the list of formats supported by Switch, you will learn that while Switch is supported for Windows, Switch is incapable of converting Olympus's proprietary DSS audio files to any other audio format. Any attempt to do so will reveal a message that the file is empty, no data is found, etc. But if the Finder shows that your DSS does have data, then all Switch is saying, in effect, is: "Hey, I can't see anything in this file," which would be a more honest and a more accurate message, instead of using misleading language about the file itself.
(As a related issue, which I will not elaborate upon here, I have a problem with NCH Software. I detest their software upgrading policy; I find their technical software abominable; and I caught them lying in a recent Google search, where their AdWord at the top of the page alleges that Switch "Easily convert dss audio dictations to wav or mp3 on a PC or Mac. Works on Windows and Mac." Don't believe this marketing hype. It is a blatant lie. I wrote them a letter, and I published it as an open letter in the record for Switch at MacUpdate.com, for anyone wanting further details.)
As far as converting DSS files to mp3, I have found no direct route. As Mark points out, the most elegant option is to use the Olympus DSS Player software. Fortunately, version 7.5 works with Mavericks; I just tested it out once again to confirm that. The Olympus web site provides downloads to the previous versions of DSS Player, which accompanied the purchase of an Olympus recorder, but it may not allow downloading of the original application itself to which you can apply those upgrades. However, if you do a deep Google search, you may get lucky and locate the original application.
Once in DSS Player, you import your DSS file(s). After they are listed in file window, you can export them to AIFF files. From there, you can either use Switch or any other audio converter which can convert AIFF files to mp3 files.
I happen to use Switch, because I bought a license years ago, and it does the job quite well, while also working in batch mode to convert many files at one go. But that does mean I recommend buying Switch, for the reasons I discuss in my comments at MacUpdate.com. Be careful dealing with this software company: have your eyes open before you purchase.
NCH Software has had years in which to empower Switch to work on the Mac, but they either cannot code the program to do this, or they do not want to. Either way, they should not lie about saying their program CAN do in their Goggle AdWord, while admitting on their website, if you probe before you buy, that Switch can NOT convert DSS to mp3 after all. I have a bias against liars.
I find it interesting that NCH Software is not above slamming Olympus for having developed, in NCH's opinion, an inferior audio format for recording dictation. Whether that is true or not, I cannot comment for it is a technical matter beyond my expertise. However, I can say that setting your Olympus recorder (in my case, model DS-2, which has worked flawlessly for me for years), allows you to record many more messages before the storage capacity (of about 68 MB on my device) is reached. So, there is an incentive, in my case, to use DSS on the device, but to convert the source DSS files later on to usable formats on my Mac.
My calculations indicate that when you convert a DSS file to an AIFF file via the DSS Player, your file size will increase about 13 times, meaning that a 1 MB DSS file will convert to a 13 MB AIFF file. Converting that AIFF file via Switch reduces that file to about 9 MB, which means that an mp3 file is about 9 times as large as an original DSS file. The vast difference in the file size allows me to record up to 22 hours at DSS (at 200 - 3,000 Hz) vs 1 hour at Stereo High Quality mode, which delivers an AIFF file (at 100 - 17,000 Hz).
I like being able to choose the quality settings, and I like the ability to call upon the DSS setting to record long conversations, interviews, or dictation, without fretting that I will run out of storage space. The ability to convert those DSS files, via the DSS Player, to AIFF, then to mp3 gives me the flexibility of choice.
The key to the whole process of converting DSS files to other audio formats is the Olympus DSS Player software: it is the essential intermediate step for a Mac user, without which you are stuck, unless you want to run the Windows version of Switch. I don't.

How can I make an editable pdf file from Indesign?

I have created a Indesign dealer catalog for my company and exported it into a interactive PDF for the Engineers to use when helping a customer with ordering. Now they would like to be able to edit the PDF with notes whenever they want. How can they do this?

PDFs are not designed to be editable. Your engineers can make comments using Adobe Reader without any extra steps provided they use the highlight and sticky note comments. If you want them to have access to the full range of comment markup you will need to use Acrobat to apply extended rights to the file.

Can't read PageMaker 6.5 files with InDesign CS3

I have a lot of old PageMaker 6.5 files that need to be upgraded to InDesign.
When I try to open them in InDesign CS3, I get an error that says:
Cannot open the file "XYZ". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application.
I get this error on a Mac Pro G5 (PowerPC), running OS X 10.5.8.
What's interesting is that when I try to open the same files on other computers on the network, it works just fine. The other machines are all Intel Macs, running OS X 10.6.8 or greater. The files are on a Mac Server.
Can this problem be fixed on the Mac G5, maybe by installing a plugin, or is there no hope?
Thanks!

Interesting thought, but I suspect the file is actually a training manual and that's the real name of the file, with no extension at all. Pagemaker 6.5 files would have had a .p65 extension, I believe.

How to Best Import QuarkXpress 8.0 Files into InDesign CS5

Folks,
Searched the forum, but I'm only finding info on older versions of Quark and InDesign.
I've got a ton of end user documents in QuarkXpress 8.0 that I need to import into InDesign CS5. (These are installation and operation manuals for data and telephony modems with lots of illustrations and diagrams in them.) I just downloaded the trial version of InDesign CS5 and could use some help.
The import procedure (for the older software) looked to be quite cumbersome. I'm hoping that InDesign CS5 is more capable and efficient at importing QuarkXpress files. I also read about Q2ID by Markzware. Does that product work with InDesign CS5, or is it even necessary with InDesign CS5?
Any advice and guidance will be appreciated. Got to get started soon!
Thanks for your help!

Hello Joel,
Thanks for your comments. I've done enough conversions in the past 25+ years as a tech writer to know that I will be faced with some clean-up efforts after the import.
My Quark template is pretty simple... one big text box on the right-hand side of each page (landscape), leaving the left-hand side of each page for my illustrations and graphics to be placed.
I think my biggest conversion problem is going to involve these graphics. Many of them have text callouts (in text boxes) with arrows (made with Quark graphics) pointing to the proper spot on the illustration or graphic. I'm wondering how well those will all convert and import. I do have them all grouped in Quark. By that I mean that one graphic and all of its associated text callouts and arrows are grouped.
I guess I'll find out!

HT3775 how can i convert an AVI video file to work on my iMac?

I have just bought an imac and am trying to put my movies on to the mac from a microsoft machine. A lot of them are in AVI or MKV formats and I want to know if there is a converter I can download on my imac which will convert these files? Any help would be gratefully received.

If you just want to move these avi and mkv files to play on iMac, you can download VLC player, it plays just every file format.
http://www.videolan.org
For converting files to Mac readable format, I use this one all the time:
http://www.appgeeker.com/how-to/convert-avi-to-mp4-mac.html
It supports handling multiple files at a time. one of my cameras record in .AVI format and i bulk convert to .mp4 or h264.

How can I convert Pagemaker 7.0 file to InDesign CS5.5?

Similar Messages

Maybe you are looking for