How can I copy a webpage that will not let me highlight it, i.e. use the control c key strokes?

How can I take a picture of a webpage that will not let me use the control C copy command? In other words, on this particular website, I try to highlight a passage that I want to save and put in a document, but the highlighting will not work. I asked them about that, and they simply said they did not have that facility, but I think the issue is protecting their copyrighted material. I know there is some way to take a picture of the page, and then I can use my picture editing software to crop it and enlarge it.

Are you trying to take a "snapshot" in a PDF?
If the part of the page or PDF you want to capture is fully visible, you can use the Windows print screen function to capture it. Either use the Print Screen key to capture the entire monitor display, or Alt+Print Screen to capture the active window.
If you need to do this often, or if you want to save the snapshot straight to disk, or if you need more than fits in a single Windows screen shot, an add-on such as [https://addons.mozilla.org/en-us/firefox/addon/fireshot/ Fireshot] can be handy.

Similar Messages

  • How can I end a popup that will not let me close it?

    I have a popup that says "pcteckers.com" continuing to pop-up.  There is no visible way for me to close it.  it prompts me to call an 877 number and give a code to get it to go away.  It has completely taken over safari and I cannot do anything at all with safari except open it, be annoyed by the popup, and shut down the whole app.  Please help!

    Launch Safari with the Shift key held down. If that doesn't work, disconnect the computer from the Internet.
    (116363)

  • Upon launching Thunderbird, how can I set a password that will prevent viewing of my emails if someone uses my computer?

    Upon launching Thunderbird, how can I set a password that will prevent viewing of my emails if someone uses my computer?

    100% this addons can help you
    https://addons.mozilla.org/en-us/thunderbird/addon/master-password/
    look at my Thunderbird when I open it

  • I have an alert message in safari that will not let me exit safari. I tried the force quit did not work

    I have an alert message in safari that will not let me exit safari, I tried to force quit but it would not let. What do i do next?

    Shut it down and when it says to reopen windows disable it

  • How can I have a button that will show/hide a text box and images on the same page?

    I have a page like below:
    I want to make so that those 3 buttons show different text under them when they are each pressed. How can I achieve this?
    Thanks.

    Hello,
    Please try using Tooltip Composition Widget to achieve that..
    You need to customize  the trigger as the button  and you can use the target to insert desired text box or images.
    you can find this in Widgets library panel > composition
    Please let me know in case you need any other clarification on that.
    Regards
    Vivek

  • How can I eject a dvd that will not play and says "supported dish not available,  also DVD player encountered a system error  -69902

    I am unable to eject a DVD.  When I try the screen says "Supported dish not available."  Before that a DVD stopped playing and the screen said 'DVD player encountere a system error  -69902.  How can I get the DVD out?

    restart your mac while holding down on the mouse.

  • I accidentally deleted my old fb app on my iPhone 3g. Now i cant download new fb app as it requires ios 4.3. How can i get old app that will work on my old phone. Any suggestions???  plz help!!!

    i accidentally deleted my old fb app on my iPhone 3g. Now i cant download new fb app as it requires ios 4.3. How can i get old app that will work on my old phone. Any suggestions??? plz help

    As already provided, if you don't have such in your iTunes library, on your computer, then there is no way to put it back on your phone. Apps are DRM protected, so even if you found a copy somewhere, you wouldn't be able to use it.

  • How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

  • How can i copy a picture that has been installed with the flash player

    how can i copy a picture that has been installed using the flash player

    You can't. You can take a screen cap of it, but the container doesn't allow access to the individual images used in a SWF or FLV.

  • How can I copy a DVD that I own to my IMac?

    How can I copy a DVD that I own to my IMac?

    Try this:
    http://support.apple.com/kb/HT2059?viewlocale=en_US

  • How can I export a video that will loop indefinitely when played from a usb drive?

    how can I export a video that will loop indefinitely when played from a usb drive?

    As far as I know, PPro does not have that capability
    If you were creating a DVD in Encore, you could put an "end action" on the video timeline to itself... so at the end of the DVD video it would go back to the beginning
    I am not aware of any way to do that for a simple file

  • How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone?

    How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone?  I can physically copy the tunes as mp3's but the phone does not seem to be able to play all of them.   Do I need to copy an entire album or can I just pick & choose individual songs?   The phone is question is an LG running who knows what for an operating system.

    AAC is Advanced Audio Coding.  Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD).  More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder).  Therefore your LG phone won't play them.
    You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button.  Change the AAC Encoder to MP3 Encoder.  After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version."  You'll get a copy of the song that should transfer to your SD card and have MP3 encoding.  Hopefully your phone will play that.

  • OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2.  need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

    OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
    I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
    Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
    Anyone know of any way to avoid that?

    Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
    Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

  • How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

    How can I create a slideshow that depicts only a version of a photo rather than the original?   Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

    There are two things we use the name "Slideshow" for in Aperture:  a Slideshow Album, used for making Slideshows, and the Slideshow that is made.  (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
    The Slideshow will use the Album Pick from any Stack.  A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack.  This makes it the Stack Pick, and will be the default Album Pick.  If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album.  Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick".  (Note the keyboard shortcut; there is also a Toolbar icon for this.)  The change is immediate.  The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

  • HT4528 hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

    hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

    Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
    Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
    The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
    Even if I sold this Ipad and bought a new one, the system memory is still there.
    I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
    One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
    Thanks for your comments.
    RAZ

Maybe you are looking for

  • Safari Quit Unexpectedly, Won't open now

    My safari has quit unexpectedly and won't reopen. I opened up the console application to view User Diagnostic Reports. The most recent crash report looks like this.. Process:     Safari [613] Path:        /Applications/Safari.app/Contents/MacOS/Safar

  • How do I create a watermark in photoshop CS5

    Hello all: I purchased the Photoshop software CS5 and I have bee atempting to learn how to make a watermark and place it on an image. I was working with a tutorial but came to a "roadblock" and have been unable to proceed. The following is the link:

  • Posting keys for account determination for transaction EXD do not exist

    hi i am doing Sales order for 1 month,no error i have got but now i am getting error Posting keys for account determination for transaction EXD do not exist HELP

  • Front window desing

    while writing code in block window my block window scrolls right and so is the front window . i want that my fron window shouls not scroll irrespective of the length of the block window. i want to display the controls at specific postion on front win

  • How to construct alias view (source) in Mapping Level

    Hi All, I have the following logic, in PL/SQL Code as follows: from source a, source b where a.PLKC = b.PLKC and a.PLDO = b.PLDO and a.PLDC = b.PLDC and a.PLLN = b.PLLN and b.PLAD > 0 ) How can we implement same logic in Mapping level by using Joiner