How can I creat virtual channel and traditional devices while my card installed,I can not do?

I installed PCI-6220 card,and I also installed DAQmx and Traditional DAQ in my computer,
but I cannot creat virtual channel at the last step(attachment:TDAQ6220.jpg).
Maybe this is the reason I didn't creat traditional NI-DAQ Device,but I can not creat it.
(see attachment: DAQ Device.jpg,there is no PCI-6220 on list).
What's wrong?What shall I do?
Junwei You

Hello Rainer,
You can see this attachment(6024E.jpg),the 6024E card appears on Traditional NI-DAQ Devices,
but I don't know how can it be created(I don't creat it,we buy the whole system together with the machine).
I tried create a new traditional Device(I want to confirm 6024E), but still I can not see any NI-DAQ device in traditional NI-DAQ device
lists. See the 'Create New....' interface.How can do it?
Thanks!
Attachments:
6024E.JPG ‏128 KB

Similar Messages

HT2731 I am from Nepal how can i create Apple Id and don't have VISA card?

I am from Nepal how can i create Apple Id and don't have VISA card?

Refer to this article:
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534

I can't find "DAQmx create virtual channel.vi"

How can I convert a "Channel" to a "Signal" ?

If you have installed the NI DAQmx Device Drivers, In LabVIEW, you will find this function in the location shown in the pic attached
How can I convert a "Channel" to a "Signal" ?
You cannot!
Gramatically and Electronically, you can only 'read or write' a signal on a 'relevant' channel
Attachments:
DAQmx_ Create Virtual channel.PNG ‏50 KB

How can i create a new and tableless database using database configuration

How can i create a new and tableless database using database configuration

How can i create a new and tableless database using database configuration
Just don't install the sample schemas. See the installation guide
http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
Using the Database Configuration Assistant
When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
Choose a custom install and don't install the sample schemas.
All other schems/tables installed are REQUIRED by Oracle

I want to know what I need and then how to take a pdf form I created in word and add the blue boxes so that anyone can type into my form

I want to know what I need and then how to take a pdf form I created in word and add the blue boxes so that anyone can type into my form

Hey john@adobe,
Could you please specify how exactly have you created your form.
You might need to have Acrobat installed on your computer to convert a word document to PDF.
Do you have Acrobat installed? If yes, what version? If no, then please try using the trial version of Acrobat DC (latest version) and access its features:
Download Adobe Acrobat free trial | Acrobat Pro DC
Also, let me know what kind of blue boxes are you talking about.
If you want others to edit your PDF form, then you need to make it a fillable form by choosing 'Form Editing' option from Tools pane.
Let me know more on this so that I can help you out.
Regards,
Anubha

How can i create list box and dropdown in my report?

dear experts
how can i create list box and dropdown in my report?
thanks in advance

Pl. see the code given below.
REPORT Z_LISTBOX.
Data declaration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST.
Selection screen ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PARAMETERS: PS_PARM(10) AS LISTBOX VISIBLE LENGTH 10.
AT SELECTION SCREEN OUTPUT ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AT SELECTION-SCREEN OUTPUT.
NAME = 'PS_PARM'.
VALUE-KEY = '1'.
VALUE-TEXT = 'Line 1'.
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Line 2'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            ID     = NAME
            VALUES = LIST.
START-OF-SELECTION.
Regards,
Joy.

Can I transfer money to other accounts on my iPad with iOS 5.1.1? I created another account and put an iTunes gift card on it, but then I realized that all of my apps are on another account, so how do I move that money over?

Can I transfer money to other accounts on my iPad with iOS 5.1.1? I created another account and put an iTunes gift card on it, but then I realized that all of my apps ere on another account, so when I recovered the password of my previous account, I had money on an account that I do not want to use. Can I transfer the money over?

Not on your own. Click here and ask the iTunes Store staff to put it back onto the card; they'll only do this if none of the balance has been spent.
(115868)

Why do we get so many vi's when using "DAQmx Create Virtual Channel.vi"?

Hi there,
Could anyone explain me why we get hundreds of sub-vi's when I use the
vi "DAQmx Create Virtual Channel"? This can easily be seen by exploring
the hierarchy of Labview examples such as "Acq&Graph Voltage - Ext
Clk.vi"???
This multitude of vi's considerably slows down my computer, especially at loading. Is there any way to get rid off that???
Thanks in advance for you help!
Jonas

Hi,
the easier you have to program, more subVI´s needed for your kind of application. Because the VI´s from DAQmx are polymorph, so many SubVI´s are included in the VI´s. In traditional DAQ you have several palettes for each kind of measuement method. Analog In, Analog Out, Digital, Counter, ...! In DAQmx you have one VI and that can all.
But, the performance of you application at runtime is not affected. Of course it takes some time to load, but just at development environment not as an application.
Figure 3. Polymorphic VIs simplify the NI-DAQmx API.
Link to Document:
http://zone.ni.com/devzone/conceptd.nsf/webmain/EE47B125BB9E053686256FBC0014C384
Hope this helps.
Alex
NI Switzerland

About virtual channel in different device and/or different type channel

Hi all,
I am looking for a way to write to several analog channels at the same time. In my code, I didnt' pay much attention to that, I just have them placed in the the same frame in the flat sequence such that they might be started to write simultaneously. However, sometimes they might not working perfectly. I am reading something on DAQmx and I found that there is something call virtual channel so I have put more than 1 channel into a unit (called virtual cahnnel), so I can write something to it at the same time. Here are my question
1) what's the different between virtual channel and channel group? If I write a array of 3 elements to a channel group (consists of dev1/ao1, dev1/ao2 and dev1/ao5), am I writing to channel group or virtual channel?
2) can I bind different channels from different devices to form a virtual channel, e.g. dev0/ao0 dev1/ao0 dev2/ao0?
3) can I bind different type of channel to form a virtual channel, e.g. dev0/ao0, dev0/port0/line0?
4) last question is about synchronization on writing to a virtual channel (or channel group?) Last say I have a pulse train each pulse is separated in time by 1.2ms and total time is 122.4ms. The pulse train will be sent to dev0/ao3, and at 12ms after start send very first pulse of the train, I need to write two analog signal to dev1/ao1 and dev1/ao5. In my current code, create a flat sequence, start the task for sending the train in the first frame, put delay in second frame and delay for 12ms, write dev1/ao1 and dev1/ao5 in the third frame. For some times, this gives me acceptable timing but not always. I wonder how does it help to use virtual channel?
In the similar situtation, what about if instead of writing to two analog channel, I write to one analog channel and one digital channel?
Thanks.

1) virtual channel is created per task and contains a collection of settings such as a name, a physical channel, input terminal connections, the type of measurement or generation, and can include scaling information.. A virtual group is specific to digital IO and has to deal with the way you read/write data off/to the port
2) yes you can create a task with physical channels from multiple devices assuming they are comparable writes (ie all analog or all analog read, or all digital) but they will have the same channel characteristics (see answer above)
3) no you cannot create a task that handle an AO and a DO from with in the same task
4) if you created a task you are using a virtual channel. The only way to ensure timing is to use hardware timing (ie onboard sample clock of you DAQ card) otherwise the reads/writes are basically interrupts and you are at the mercy of the OS to service the interrupt request
if you need more information please repost with more questions, include your DAQ hardware, and any code pictures to give us a better idea of what you are trying to accomplish and how you are going about it
Applications/Systems/Test
National Instruments | AWR Group

Do I really need to create virtual channels in data neighborhood in order to access my pci 6034E?

Hello all,
This may sound a little weird, but I would like to know how to configure my 6034E without having to create virtual channels in data neighborhood. Reason being, the data is often lost when users update or search for new instruments in Measurement and Automation.
I have tried using the AI CONFIG.VI, which gives me all the attributes I need...set channel name, device name, device channel, input mode, sensor/actuator type ect.. When I connect the AI READ.VI the value read back is incorrect. Matter of fact as an exapmle, the power supply could be off and I still read 10 Volts. But when I have created a virtual channel in data neighborhood, the data read back is correct.
Is there another way to read back data but not have a virtual channel in the data neighborhood?
Thanking you in advance,
Demo

Duplicate post

Can we create Communication Channel Dynamically at runtime

Hi Experts
Can we create Comm Channels during run time, If yes can any one help me out how to create....?
My requirement is
we get a file called manifest file. This file has list of file names and paths.
step 1. XI has to read manifest file
step2: from manifest file XI has to read file names and create comm channels dynamically to read these files
I am looking for option to create comm channel dynamically.
we need to determine sender dynamically.
Advance for your Replies
Regards
Venkat Anil
Edited by: Venkat Anil Gannavarapu on Jun 1, 2010 6:29 PM

Hi,
or you can just write a script that will take the file from the path and put it in one directory for PI to fetch
this should not take longer then 15 mins to create such a creature
Regards,
Michal Krawczyk

Daqmx Create Virtual channel timeout

Why almost a minute and a half to get an error message from daqMX Create Virtual channel VI.
I need to find a way to have my executable bleep immediately if the underlying drivers are not installed.
For example, I have LV at home and supposedly have the drivers installed too but no hardware connected.
Sometimes I run a that uses daq, however when it encounter Creat Virtual Channel VI it appears to hang for a minute and a half before finally giving an error.
Anyone else been there, done that?
Thanks

Thanks for replying D-cubed.
Actually Im calling create virtual channel in a state machine to set up the data acquisition.
When using on a machine that has a daq device installed its a piece of cake. no sweat.
However, when I am at home I have LabVIEW but possibly either no daq drivers or no daq hardware.
I believe it may be the second case since I can place a task on the BD so, I will assume the drivers are installed correctly.
There is just no daq hardware in the system.
WHen the create virtual channels Vi is called the PC appear to hang because that VI is executing internally (looking for a device I presume).
The timeout takes 1.5 mins and if not for me waiting the PC would appear to be hung up.
Finally some 'Mig error' message appear contact Ni about and so on.
WHat I am trying to do is have my program error out immediately instead of 1.5 mins later that there is no Daq device in the system.
Thanks again

What does DAQmx Create Virtual Channel (TEDS AI Accelerometer) actually do?

Hi all,
I have a basic vibration logging application for which I'm using TEDS enabled accelerometers. I'm configuring a task using the Create Virtual Channel (TEDS AI Accelerometer) to add the correct channels, but none of the data from the TEDS table appears to be getting pulled into my channels.
Does this VI pull scaling information from the TEDS such that the values I read out are scaled to the appropriate unit? Is there a way to force it to drag all the data from the TEDS through so that when I save a waveform to a tdms file they end up as channel properties?
I've included a screenshot of the VI that creates the task for reference. Thanks!
CLAD
Solved!
Go to Solution.
Attachments:
Create TEDS channel.jpg ‏100 KB

They are TEDS 1 accelerometers. I can actually see the entire TEDS table both in MAX and in my code (I read out the bitstream for my own amusement).
To collect the data I'm using a DAQmx Read N Chan N Samp - 1D Waveform. The output waveform array is wired directly to a TDMS write VI. The properties on the channel end up as shown in the attached image; note that no scaling information is carried thorugh.
CLAD
Attachments:
AccChannel Properties.png ‏37 KB

Creating Virtual Channel in RMAN

Hi ,
How to create virtual channel in RMAN? I tried googling for this info, however i wasnt able to find any details on it.
Can someone help me with this or direct me to a link.
Thanks

Hi;
Please see:
Integration of RMAN with virtual tape library
Integration of RMAN with virtual tape library
Regard
Helios

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

You have to select one or the other.
Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
Peter

How can I creat virtual channel and traditional devices while my card installed,I can not do?

Similar Messages

Maybe you are looking for