How can I create a bootable DISK IMAGE of my PB Internal Drive?

I would like to make a bootable image of my Hard Drive but without including any Free Space.
You see all I need on the image are the OSX and the programs, NOT the 60GB of Free Space. Disk Utility however wants to create a 80gb image which includes 60GB of Free Space.
I would like to use the Bootable image as a source image to use with the RESTORE function in Disk Utility.
Regards

You'll need a second machine or an external HDD with Mac OS X installed on it.
For purposes of this procedure I'll be calling your machine the 'source' and the second machine or your external HDD the 'target'.
First either boot the source into target mode by holding down the 'T' key while it boots. Once you see the FireWire icon on the screen, let go of the 'T' key and plug the source into the target. If you're going with the external HDD route, boot your source of off your external HDD.
Now, select the drive of your source machine, and hit Apple-I to bring up the information pane. Down at the bottom (in the permissions area) you'll see a check box labeled "Ignore ownership..." Uncheck that.
Open up Disk Utility. Select the source drive and run First Aid and Repair Permissions on it.
Now, select the File menu -> New -> New Disk Image from Folder. You're going to want to hit that big "New Image" button, but don't. Trust me. It'll only cause trouble for you down the road.
Select the source drive as the source. You can leave everything else the same and click "Image".
Select the target as the destination. Click Save.
Wait for a couple of hours (depending on how much stuff you have).
When it's done, select the Images menu -> Scan image for Restore.
Select the disk image you just made and click "Scan".
When that's done you have a restorable image. Just use the restore tab to restore it.
I've done this literally hundreds of times and it's worked every single time.

Similar Messages

How can I make a bootable disk so as to repair my drive?

Hello,
I am away from home and not carrying my Tiger install DVD. I had three crashes after installing Safari Beta 2 days ago and now disk utility reports failure on exit when verifying my Macbook drive. To repair this I need to boot from some other medium and run Disk Utility from there. Is it possible for me to make a bootable DVD? Or a bootable USB memory stick(the one I am carrying is 1 gig in size)? Or can I download something to make it possible? thanks a lot, LJ
PS this has happened me 3 times in a year since moving to mac and it peeves me greatly that such a great OS cannot solve its own directory structure problems - the way Scandisk does for windows.

thanks for the suggestion. I have tried fsck before but for me it has never solved the problem - afterwards, verify disk in Disk Utility still reports failure on exit. Seems I get myself into the biggest possible diffs! Fsck is supposed to do even more than disk utility but I have not found it so. In my previous diffs, when I boot from another medium and run "repair disk," it (nearly!) always solves the problem. If anyone else can give me an answer I would be most grateful LJ

Question about creating a bootable disk image in Leopard.

I have a Powerbook G4 that originally came with OS9, I upgraded to Tiger and recently upgraded to Leopard. The computer is running great but if it should go down what are my bootable options?
1) Boot from the install disk set then load tiger upgrade then load Leopard upgrade? then reload all my programs back on the G4?
2) Can I create a bootable disk image and save it on an external hard drive and then boot and reload everything at once? ( I guess by asking this question I really don't understand what the full scope of a bootable disk image is?) can someone explain...
Which option is better? I am also running __time machine__... what is the safest and easiest way to use time machine to get my software back together after I get the operating system up and running.
Thanks for the advice

Your best alternative is to create a bootable clone on an external Firewire drive.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Of course you can use other software for cloning and backup:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Intego Personal Backup (Commercial)
9. Data Backup (Commercial)
For use with Leopard always be sure you use a version of the software that is compatible with Leopard.

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How do I create a bootable snapshot image of Lion?

How do I create a bootable snapshot image of Lion? In the past, I used disk utilities - restore to create a copy of current hard drive on an external drive. If there was a problem, kids could boot to external and work until internal drive was fixed. This proved to be a great solution. On a new Macbook Pro with Lion, I get an error when I try. It says to do a restore from the recovery disk, but the recovery disk says it is a limited function OSX. I would like a full OSX so they can continue to work and even copy files over if the internal disk is suffering intermittent failures enough not to boot but not enough to keep from copying files. A few years ago one of the kids had a disk/boot failure duing finals but was able to boot from the external hard drive, copy over what he needed and access the internet so that he could finish the exams. Time machine is great, but there are instances where you need a quick fix to keep going until the new hard drive arrives.

I do not run Windows, so I have no idea how to handle that type of situation.
But, just to be clear: disregarding Windows, the recovery option downloads the OS and installs it. Technically, that is not a clone unless you copy the installer and create a bootable OS with it. A clone is an exact copy of your system including all your apps, user settings, files, etc, etc and will exist on an external hard drive in addition to your system on your internal - that is done with CCC or SuperDuper.
And, a GUID partition is created in Disk Utility > click on the drive > choose Partition > choose a layout other than what you now have > there will be a clickable Options button below. Click on that and you can choose GUID. Note: partitioning your drive will erase everything on it.

How can i create a bootable usb sata for xp

how can i create a bootable usb sata for xp

Installing Windows XP on a portable USB hard drive is not supported.
Carey Frisch

How can I create a java.awt.Image from ...

Hi all,
How can I create a java.awt.Image from a drawing on a JPanel?
Thanks.

JPanel p;
BufferedImage image =
new BufferedImage(p.getWidth(), p.getHeight, BufferedImage.TYPE_INT_RGB);
Graphics2D g = image.createGraphics();
p.paint(g);
g.dispose();

How can I create a high res image gallery, need to have print res photos for a pressroom section.

How can I create a high res image gallery, need to have print res photos for a pressroom section.

If you want Muse to "pass through" your images and not adjust, compress, crop etc - you need to place your images in the lightbox EXACTLY at the right size, pre-cropped and prepped in Photoshop.
So if your light box is 800x600 the image you're dropping into that must be 800x600 exactly with no effects, rotation etc added to the lightbox frame. This stop Muse fiddling with your images, if they are perfect when inserted and you're not asking Muse to crop, expand, add effects etc. If it's perfect when inserted, Muse SHOULD also leave the resolution alone too, but I have not tried that one, but in theory, it should work.

I have all my pictures in an external drive, how do i create a library in iphoto without using my internal drive space?

i have all my pictures in an external drive (around 1tb), how do i create a library in iphoto without using my internal drive space? thanks!

In iPhoto use the command "File > Switch to Library" and then click "Create New" in the Library Chooser panel.
Select a folder on your external drive as the destination.
You can also get to this panel by holding down the alt/options key when you launch iPhoto.

How Do I Create a Sparse Disk Image?

I'm having trouble creating a sparse disk image. The instructions I'm following are:
+1. Open Applications->Utilities->Disk Utility.+
+2. Select File->New...->Blank Disk Image.+
+3. Name it, set the size to what you'll need, set the encryption to AES-128, and set the format to sparse disk image.+
- http://forums.macrumors.com/showthread.php?t=257063
The problem for me is I do not see an option for "sparse disk image." The only options I see for Image Format are:
+read only+
compressed
read/write
+DVD/CD master+
Is there something I'm missing?

Nevermind, found it.
Figured out there's a difference between pushing the New Image button in the toolbar vs. going to File > New > Blank Disk Image...

How can I create an iPhoto Library from photos on an external drive?

Here's my issue:
I have a MacBook Pro running OS X Mavericks, and I am just about out of hard drive space.
I also have about 20 GB worth of photos on an external drive. The photos are not organized at all, just got dumped into a folder there during a hasty backup a couple years ago.
I'd like to use iPhoto to get these photos organized, but don't have the space to import them into the library on my laptop.
How can I create and manage an iPhoto library with these photos while keeping them on the external drive? They are on a terabyte drive, so I have a feeling I'd like to make that my main library moving forward.

Check that the drive's formatted as Mac OS Extended, drag the iPhoto library to it, launch iPhoto with the Option key held down, and choose that library.
(114618)

Creating an Encrypted Disk Image on an External (USB) Drive

I have an external 600 GB drive (2x 300 GB SATA 3.5" disks in a Thecus N2050 RAID0 external enclosure connected to iMac by USB2) onto which I would like to backup a large amount of data (500 GB).
I store this external drive away from my home (in the office) and since I cannot guarantee physically locking away the drive I would like to logically lock the drive by placing all the backup data into an encrypted disk image created on that volume.
I have tried creating an encrypted disk image on my USB volume in Disk Utility (Apple's instructions here) but I experience a number of issues not documented in the Apple article:
1) I am not presented with a drop-down option for the size of the disk image.
2) When I go ahead and try to creat the image I am told that the creation was impossible "file or folder does not exist".
Is it possible to create disk images on USB volumes (I cannot create such a large disk image on my iMac HDD as I do not have sufficient space).
thanks in advance
Raf

I realised that in Disk Utility you must not have any of your mounted drives highlighted in the left hand pane.

Qosmio - How can I create a bootable OS DVD?

Hi ,
Please Help me
I have a Toshiba Qosmio laptop with Microsoft Windows Vista Ultimate .
The DVD of the operating System was attached with the laptop but now i lost it.
But i have the files that was in the original DVD
But i don't know how to make it a bootable DVD to reinstall the OS
THIS IS THE FILES
[http://9ore.net/view/3619/TTTTT.png]
PLZ HELP

Hello
The Toshiba recovery disk creator it’s preinstalled on your notebook and you can find it in the start menu in the Toshiba folder.
But this program is only available if you have the factory settings preinstalled. If you have reinstalled your notebook by using a original Microsoft disk it’s not more installed.
Normally you get the following message if you don’t have created the recovery disks:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+
In worst case you must order a new recovery disk from Toshiba directly or from an authorized service provider.
Greets

Software to create a bootable disk image????

Hi,
I need to create a bootable image. I have a ISO file, and need to create a bootable image to install software onto one of my servers. Is there software out there for a Mac that will allow me to create a bootable image?
Thanks for any input,
Nigel

Disk Utility doesn't make for bootable images. However, the command-line utility 'hdiutil' does (use it via Terminal.app. I've made bootable Linux DVD images before that way, but never a bootable Mac image.
I'm guessing that a bootable Mac image would involve making a disk image file, copying the necessary system files, blessing the image (in Terminal.app, type 'man bless' for more info), and then converting it to a regular ISO image.
Similarly, I think that all you need to make a bootable USB key/drive is to partition it GPT, copy the system files, and bless it. That said, you can probably use the OS X install media to install the OS on the USB key (it certainly works for USB hard drives) directly. You could even do that, then take an image of the drive (using dd) and convert it to an ISO with hdiutil.

Can I create a bootable disk

Is it possible to create a bootable DVD to use when I need to work on the hard disk?

The simplest thing would be to clone your boot drive to a backup (which you should be doing anyhow). Popular backup utilities are Carbon Copy Cloner and Super Duper.
Alternatively make copy of your installer dvd. You can do that with Disk Utility. Here's a small articale on how to do that.
Make a Bootable Backup Snow Leopard Install Disc

How can I create a bootable DISK IMAGE of my PB Internal Drive?

Similar Messages

Maybe you are looking for