How can I create a fIlter to delete only "junk" from the server?

One of my E-mail accounts is that of a major client. I handle their customer service online. Normally our protocol is to always leave all messages on the server, so for that one Thunderbird account, I have it set to never delete messages on the server.
But the account recently started getting a lot of junk messages. Thunderbird is doing a remarkable job at marking those and placing them in the junk folder for that account. I would like to create a filter that could remove them from the server, preferably those more than "x" days old so I could monitor the activity to be sure that no important message are removed.
I did notice that in "Filters" I can create a custom filter from a header of my choice, but can't seem to create what I want which is:
- after mail is marked as Junk by Thunderbird to delete those messages from the server if they are older than "X" days (my choice of "X").
- not delete any other messages from the server for that account

I believe that did it! Thank you. I am running those changes on a secondary E-Mail address for the same job and server and it appears to be working properly.

Similar Messages

How can I stop my iPhone 5 deleting e-mails from the server?

I know this question has been asked before, and has been answered in respect of iPhone 4 models, but I don't seem to be able to find any answers for this problem with the iPhone 5.
When I delete an e-mail from my iPhone, it means I can't access it from my laptop. It never appears on my laptop because it has been deleted altogether. That's not what I want! It means I have to keep e-mails I would otherwise delete from my iPhone simply because I want to read and/or retain them on my laptop.
I only want to keep e-mails on my iPhone that I want on my iPhone and want to delete the rest, not altogether, but just from my iPhone. I often want to deal with an e-mail on my laptop even if I have deleted it from my iPhone. Hope that makes sense!
Thanks for any help!

That behavior is a function of the type of email service you are using which in your case must be IMAP. There is no way of changing that behavior on the iPhone. Perhaps you should investigate switching to a POP-type email service.
There would be no difference between the iPone 4 and iPhone 5 in this respect.

How can I create a whitelist of banking websites based on the server certifcates of legitimate sites?

I want to configure FF so that I can optionally activate a whitelist of my legitimate banking websites. When the whitelist is turned on, FF should only be able to display those sites. When the whitelist is turned off, FF works as usual and displays all sites. I would create the whitelist by visiting my banking websites and somehow adding the server certificates of those sites to the whitelist. So the whitelist would consist of the server certs of my banking websites. When whitelisting is then turned on, FF would allow me to visit only those sites whose server certs match those on the whitelist. This would protect me against phishing sites. How can I do this? Thanks

I believe that did it! Thank you. I am running those changes on a secondary E-Mail address for the same job and server and it appears to be working properly.

How can I set my filter to bring only zeros for the field?

I have a field that has Number as data type in a table in Access. I only want to extract only zero values.
Field1     Field2
Orange    33
Apple       0
pumpkin 0
Tangerine 12
I appreciate your input.
GGGGGNNNNNN
GGGGGNNNNN

Try a LEFT JOIN --
SELECT [All Applications-Western].ApplicationNumber, [NN List - Western].approved
FROM [All Applications-Western] LEFT JOIN [NN List - Western] ON [All Applications-Western].DealerNumber = [NN List - Western].DealerNumber
WHERE ((([NN List - Western].approved)=0));
     OR a RIGHT JOIN --
SELECT [All Applications-Western].ApplicationNumber, [NN List - Western].approved
FROM [All Applications-Western] RIGHT JOIN [NN List - Western] ON [All Applications-Western].DealerNumber = [NN List - Western].DealerNumber
WHERE ((([NN List - Western].approved)=0));
Build a little, test a little

How can i create a new user with only read rights ?

How can i create a new user with only read rights ?

You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

How can i creat apple ID free when i am from georgia?

how can i creat apple ID free when i am from georgia?

Anyone can create an Apple ID.
Instructions here > Apple - My Apple ID

How do I create a new account and get stuff from the old account to the new account

How do I create a new account and get stuff from the old account to the new account

There are instructions on this page for creating a new account : Set up an Apple ID in iTunes
Or if you don't want to give credit card details : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
But you won't be able to transfer purchases from your old account to it, all content that you download from the store will remain tied to the account that downloaded it.

On my ipad mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo). I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.

On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo). I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.
My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
Appreciate suggestions.
[The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]

Is your Yahoo account set up as POP3 or IMAP?

How can you tell what type of Iphone I have from the model number or serial number from the settings menu

how can you tell what type of Iphone I have from the model number or serial number from the settings menu?

Type Serial Number from Settings App here https://selfsolve.apple.com/agreementWarrantyDynamic.do it will tell you the type of iPhone.

How can i arrange my Top Rated Playlist to be from the new song till the old i added... (also to be in the iphone) ??

how can i arrange my Top Rated Playlist to be from the new song till the old i added... (also to be in the iphone) ??
i want the every sone the i mark as FULL STARTs (full rate) will be shown in the top of the list.. and each time i add a song that way it will be the first..
i need it to be *** same in my iphone.. hope to find the help here
thanks !

there is no way to make a list that every song that i mark full star will be in the list as i added them ?
i mean i want to add all song i like with FULL stars but i want them to be arrenged as i added them to the list..
i think i had it once and it was working perfectly with the iphone but now for some reason nothing seems to work..

Why i keep seeing email on iphone, even after i deleted it directly from the server?

Why i keep seeing email on iphone, even after i deleted it directly from the server?
This means it doesnt sync the server inbox, only keeps pushing new emails!
How to force it to realy sync every time the server inbox, and just show me in the iphone inbox exactly what i see in the server inbox???

I'm just fresh in iOS, but dont think its a POP/IMAP matter.
Always used mobile push email apps on symbian and android with POP and never had this issue.
My usual former scheme is:
a) My main email client is Outlook at my laptop (POP). This one is the master email client and after download new emails deletes them at the server.
b) My secondary is a mobile email client (also POP) - just to see whats going on and maybe reply here and there.
Meaning, laptop does cut/paste and mobile does copy/paste
So:
a) If i download a new email first using my laptop, it will never be pushed latter from iphone (its not there anymore).
b) If i download a new email first using my mobile app, and only then download it with laptop, it is still there available, and then gets deleted at the server.
c) If i download a new email first using my mobile app and if i manualy delete it and then perform another sync, then this email is deleted at server, and will be no more available for download to laptop.
Resuming:
1- The laptop ask to server what's in the inbox, downloads it all and then order the server to kill them all.
2- The iphone only ask whats new and downloads it all.
3- The iphone SHOULD ask server what's new, AND ask server what was removed from server inbox since last sync, AND tell server wich emails were removed at iphone since last sync.
As far i remember, at least one symbian app called Profimail does all this quite perfectly...
Any ideas?

How can i create a custom table in to my banking services server

I am having product type and account type details for those things I need to create a table
Product Id.                 Account Type
DP_PYGO_P     21
DP_BASIC     25
DP_UNLIMIT     24
DP_ADVANTG     17
DP_SAV                     34
DP_TBILL                     54
DP_USDCHQ     19
DP_FREEDOM     52
For the above fields how can i create a custom table into banking services server

Transaction SE11, maybe? I don't really see the problem, unless you have never created a transparant table before...

How can I create SC without material number only description?

hi,
I have a problem . I want to create SC without material number only description.
How can I create SC only use description.
Thanks for your help.

Hi
Use the 'Describe Requirement' option in the Shopping cart creation screen.
Regards
Reddy

How can I create a fIlter to delete only "junk" from the server?

Similar Messages

Maybe you are looking for