How can I create a horizontal line under a line of text?

Hi,
I have FM 12.0.3.424.
Does anyone know how to create a horizontal line under heading text that is the width of the page? Similar to creating a border but without the top and sides.
Is it even possible?
thank you in advance!

Use the "Frame Below" attribute in the Advanced tab of the Paragraph Designer for your heading tag to use a named Reference Frame from your Reference page. If you're using the default templates for your documents, you could try the Single Line selection (or make your own).

Similar Messages

How Can I Create One Entry Sheet For Multiple Line Items of A PO

Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

hi,
It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
you have to make different service entry sheets for different item of service master.
regards
Manish Joshi

How can I create a horizontal scrollbar with a centered thumb that scrolls content from both sides?

I am having trouble figuring out how to create a horizontal scrollbar component either by itself or nested inside a data list component that will have it's thumb centered in the track when running and reveal content from either the right or left side when the thumb is moved. The furthest I have managed to get is to create a data list component with a scrollbar component inside that has a centered thumb that reveals content from the right side of the list (0 through 10 of the items) but only reveals blank area when tracking the other way. Is there a way to create say… negative items in the data list… 0 through -10? Or am I approaching this the wrong way. Please help. Thanks.

Mykola,
Thanks. I guess I was hoping for an answer that addressed my question from a designer's point of view rather than a developers'. As a designer with over ten years experience using Adobe products for print work it is difficult to understand why "centered" is such a complicated concept when designing art for use on the web. It is so frustrating to realize that most containers for images and text can only be resized by pushing and pulling handles located on the right and bottom; Catalyst seems like a great start but if Adobe really wanted to impress the "design" community it might consider putting all that supercharged code underneath the hood of some more familiar "design" tools. Maybe a "catalytic converter" would allow the introduction of a "centered" tool for every element.
After all, why is it literally twenty-five times more difficult, requiring the use of three additional programs to create a component that functions exactly like a typical data list and scroll bar with the exception that the thumb is "centered" on the track and reveals images from both the right and left. For that matter why not also have as an option a thumb that snaps to the bottom of the track and reveals images from the top… and one that snaps to the right and reveals images from the left when you run the project? It just seems so logical to expand the scroll bar component to include these options.
I am very glad to have Catalyst and will redesign my project to fit within the constraints of the tools available in the program but it seems that if Adobe is really serious about Catalyst being a window into the world of web design for designers/AD's that perhaps it might benefit by focusing on what might improve the program from the designer's point of view. I hate to say it but the Catalyst forum is already rife with answers to questions that are riddled with code… Literally. And to be honest most designers don't have the time to decipher that code. As a designer I work regularly and have a deep understanding of Photoshop, InDesign, Illustrator, Acrobat Pro, Final Cut Pro, Final Draft and modo. I do hi-res assembly, retouching, design and layout, identity, production, 3D modeling and rendering, video editing… and before I switch to using Catalyst for web mock-ups I am going to need a more "designer" friendly set of tools and definitely a "centered" control.
I really think Adobe is fantastic. But I also think it could take a lesson from a great little company called Luxology. I tried learning 3D modeling and rendering for years with programs like Lightwave, Maya and others, always with mixed results. Then Luxology came along and actually delivered on their promise to create a 3D program for artists. What was the factor that made all the difference? Well, besides the Apple award winning interface and sets of tools it was the training available on their sight. The program itself ships with thirty-six hours of quicktime movies. And hundreds more hours available for download. I have never yet not been able to quickly and easily find an answer to a question I had about how to accomplish something in modo. You know how long I have already spent on Adobe TV searching through videos and on the Catalyst forum searching through topics trying to get an answer to what I thought was a very simple question? Way too many. If I have a question about a Luxology product that I can't find the answer to do you know what I do? I call Brad Peebler, the President of Luxology. I'm not special nor do I work for some special development house with special privileges that is simply their policy. And that policy has paid big dividends. Both ILM and Pixar has licensed their technology.
Well… I apologize for this long response but I really think that if Catalyst is going to attract the market it wants that it will have to consider putting some designers on the development team. After all… Isn't that what the promo videos tout… Finally a web design program for designers. Well, I guess we'll see.
Karl

Muse / Sub-Navigation: How can I create a sub-navigation under the main navi - BOTH levels in HORIZONTAL direction???

More specific: I want to create a two-level navigation, whit both levels in horizontal direction.
Example:
1st level: Products,
2nd level: Type 1, Type 2, Type 3 etc

Dear rohit776,
enclosed two screenshots. First upper one is showing how I want to do it.
Problem is: It is build completely manually and it does not work. When clicking on References it directs to a blank side and of course the main navi point (References) should be highlighted while I select between the three sub-points.
The second screenshot shows how my structure looks like. Here the masters are including duplicates (therefore they doubled)

How can I create a NetBoot image using command line tools?

Is it possible to create a NetBoot image entirely using command line tools?
(That is, without using the SystemImageUtility)
If so, are there reasonable instructions posted somewhere?
I don't believe I can use SystemImageUtility with my current setup,
but I would be happy to hear how I could:
I have a set of Xserve clusternodes but without optical drives or video cards.
One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
They are wired to a gigabit switch.
I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
I have tried to start one node in target(Firewire) mode, connect it via Firewire
to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
But a NetBoot image requires the whole nbi file, right?
Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
Thanks for anyones help.
dmaus
Mac OS X (10.4.4)

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

How can I create multiple fillable fields under one label?

I have a from which requires identical fields to be entered. For instance, I have one column for Name, one for Title, one for Phone and one for Email. Right now I have redundant rows of labels that are taking up valuable space on the form. Rather than repeat the labels above each field, I would like to include 6 fillable fields under one label. Is this possible? See example below:
Name
Title
Phone
Email
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)
(Fillable field)

Formscentral doesn't support tables like that.
To create a form in Acrobat, you'd normally start by using an application like InDesign or Word to create the layout and then convert to PDF, open in Acrobat, and add the form fields: Tools > Forms > Edit
Post again if you can't get this to work. It's relatively easy to create an array of fields to create a table using Acrobat.

How can I create a Floating Windows under LV 6.02?

I am interested in adding to my application a floating window. I need that the behavior of that window will be exactly equal to the one which one can create in other programming language, I mean , that is found always on-top and that the window of the application that is found below follows being the principal area for the user.

If you want to create a flotaing window , may be you mean Child Window. So in the first Place you must to get the handle to the VI that will be the floating window (child window).Use the "Find Windows Handle.vi" that I send you.
In the control labeled "lpszWindowName" you must enter the name of VI that you want to be a floating window (child window).
Once you get the handle or reference to the floating window (child window) ,the only thing that remainds to complete the operation is assign this handle or reference to the window that will be the parent window. The VI called "Make Child.vi" permorm the final operation. You must to pass the handle of the floating window (child window) to the control labeled "handle child Window" , and pass to the control lab
eled "Name of Parent Window" the complete path to the VI that run as parent window. Of course if you want that the floating window was contained by the desktop just don´t pass anything to this control.
I send the libraries that you must to use in order to performe the operation that previously comment.
I hope you enjoy your Child Windows .
Attachments:
Child_windows.llb ‏48 KB

How can I create a bulleted list where each line builds in independently?

I would like to make a bulleted list in my video where each bullet fades in as the person says them in the video (it is not at a constant rate). So far the only way I've accomplished this is to stack 6 or 7 of the 'Fade' title generators on top of eachother and adjust the length of them to match the audio. It seems like there must be a better way to do this as this solution is quite combersum when trying to align all the bullets (wish there was a bullet format in the text formatting box) and it uses a lot of computing power to make adjustments on so many generators. Thanks.

I am sure there is a way to do this in FCP or Motion. However, what I do is to build my bulleted list in Keynote against a green background. Set up the Keynote presentation as 1920x1080.
I then use it in FCP or iMovie as a greenscreen effect.
After creating the bullets in Keynote, I export them as a QuickTIme Movie with a timed advance. I then import the QuickTime movie and edit it as I need it.
Keynote has dozens of text effects and builds, including the fade that you need.
Here is a quick and dirty sample.

How can I create a random number and letter in a text field...

Hi All,
I am using application express. I want to get a random number and letter for a text field but not sure how to do this. Say I have a licence form and I want to get the licence number automatically when user wants to create a new licence and it needs to be unique. The format I am looking for is - HQ2631 something like this.
I am thinking I have to create a trigger but not sure how to go about this....
advanced thanks,
Tajuddin

Something to play with:
Your method can generate 26 * 26 * 10000 different licence_ids
Generating one million ids takes 20 seconds but produces between 70000 and 80000 duplicates and is rapidly getting worse (if that is something over 7%, doubling the ids generated that grows to something under 30%)
Just see if you can live with that.
select sum(collisions) all_duplicates,count(*) distinct_duplicates,max(collisions) max_multiple
from (select licence_id,count(*) - 1 collisions
          from (select DBMS_RANDOM.STRING('',2) || trunc(DBMS_RANDOM.VALUE(1000,9999)) licence_id
                  from dual
                 connect by level <= :to_generate
         group by licence_id
         having count(*) > 1
       )Regards
Etbin

How can i create a simple netweaver portal page that shows text and images?

Hi,
i have a simple question or maybe it's not so simple.
I am completly new to SAP Netweaver 2004s Portal. At the moment i'm trying to understand the struture of the whole thing. I already know how to create roles, worksets and pages and i know how to combine the different elements so a user can acces them.
And now i want to create a simple portal page that shows text and images. Is it possible to create such a simple page with the portal content studio? What iView do i have to use?
(I just want to create a start page with a welcome text on it.)

Marc
Considering that you would any ways go ahead with complex development from this simple start page I recommend create a Web dynpro Iview for your start page (include the Iview in your page).
For putting the contents use Netweaver Developer studio to build a simple start page application and put your static text on that Iview.
Please go through the following log after your NWDS development is over - This will make you comfortable for further challenging work.
http://help.sap.com/saphelp_erp2005/helpdata/en/b7/ca934257a5c96ae10000000a155106/frameset.htm
Do reward points if this helps and let me know of you want anything more.

How can I create additional "Sent Mail" folders so that I can organize my sent mail along the same lines as the inbox? I use Mail v 4.5

How can I create additional or sub "Sent Mail" folders so that I can organize my sent mail along the same lines as the inbox? I use Mail v 4.5.

Thank you for your reply Don, but I had already gone through that procedure and it will only create new mailboxes for received mail. I want to create new mailboxes for sent mail, i.e. the first column being "to" not "from". Under the Mailbox menus there is an option "Use This Mailbox For" but all the options under that (including Sent) are greyed out. Unfortunately the View/Columns option to change from "From" to "To" changes all mailboxes not just the active one.

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

I cannot recover my Master Password under 10.6.8. I want to change it. I do have my admin password for my account. How can I create a new master pw?

I cannot recover my Master Password under 10.6.8. I want to change it. I do have my admin password for my account. How can I create a new master pw?

If you are referring the Master Password that can be set in System Preferences>Security>FileVault, then see this thread:
How to reset FileVault master password
http://discussions.apple.com/thread.jspa?messageID=5822772
As explained there, and for obvious security reasons, a new master password created in this fashion way will not unlock any pre-existing FileVault accounts. Resetting the master password is therefore only useful after you turn off FileVault in all existing accounts. You can then turn FileVault back on after the new master password is in place.

I Have iPhoto on my macbook pro under a different account, how can I create/install my own iPhoto?

I Have iPhoto on my macbook pro under a different account, how can I create/install my own iPhoto?

The iPhoto application should be installed in the "Applications" folder and thus available for all users on your MacBook Pro.
When you launch iPhoto from a different account hold down the ⌥-key, to be prompted where you want to create a new iPhoto library for that account. By default an iPhoto Library would be created in the "Pictures" folder of that user account.
Regards
Léonie

How can I create a vector line

A vector image editor needs edit a vector line.
How can I create it ? thanks

a biot more information would'n hurt anyone ;-)
What do you want to know:
How to calculate the new line-position / attributes after a mouse-drag?
How to use mathematical 'vectors'?
How to paint it?
Eth

How can I create a horizontal line under a line of text?

Similar Messages

Maybe you are looking for