How can I create a new work center

I try to create a new work center.I found a transaction 'OP42' . But I can't set a personal number and name.where should I write them, or should I use any other transaction??
Thanks...

Hi,
Pl go to <b>CR02 -Capacity-Goto menubar select Goto -Individual capacity -Enter personal name here</b>.
Hope this helps.
Regards,
Mani

Similar Messages

  • How do I create a new Work Center for the transaction launcher and links

    Hi
    The requirement here is for me to find out if I can create a new Work Center that will contain up to 6 assignment blocks and each block having either links to websites and BW reports, or triggers to R/3 applications via the transaction launcher.
    Can I do this purely through customising or do I need to create a new view using BSPs? If I can do it through customising please could I have a few pointers to what component I would need to use/copy?
    Regards
    Declan

    Hi Robert,
    Thanks again for taking the time to reply.
    Just so I understand, if I want to show a work center I need to link it to a component / view? I think this was the original query - do I need a developer to create the view that contains the 6 blocks with their links to reports, transactions and websites? I think when I talk about blocks I mean 1 viewset containing 6 views. There is no SAP standard view that would suit my requirements is there? Even if the work center had 8 views, I can always hide the two views in configuration.
    After the developer has created the view, I then reference that component in the target Id in the define logical links section of my work center.
    If my understanding is right, then it follows that it is not possible to create a user specific work center without some development.
    Is this correct?
    Cheers
    Declan

  • TS2756 How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

    How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
    i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
    the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
    the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
    but not the usb iPhone i used to have.
    And when i try to add a new one i dont get a USB option.
    can some one help me please??
    this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

    The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

  • How do I create a new game center id for my own games

    My kids have many games on my phone (4s) how do I create a new Game center id and load some of the same games as my own?

    You can change the account by tapping or clicking Account and then signing out of the current account and into the new one(Apple ID).

  • My two iPads share an Apple ID.  How can I create a separate Game Center account so they can play each other?

    My two iPads share an Apple ID.  How can I create a separate Game Center account so they can play each other?

    1. This is a year old post.  Things have changed, the answer is no longer accurate due to how the OS functions now.
    2.  You can't have a second Gamecenter account tied to the same Apple ID, because the Apple ID is the game center account.  They are not separate things.
    3. The OP said they had 2 iPads, which means they can use a different Apple ID for Gamecenter on the second iPad.
    4. You can still creare Apple ID's specifically for game center without changing them for the other services on the other devices.
    ronjack wrote:
    I have the same issue.  Young children who cannot get Apple ID's but we all want separate Gamecenter accounts.
    You need to get Apple ID's for them.  They aren't getting them, you are. You can manage these new ID{s yourself. You can even make sure they have no credit card and are not associated with any other service on the device. So essentially they are Apple ID's for GameCente only.

  • How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

    How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

    Hey -
    I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
    My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
    He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

  • How can I create a new Numbers Document through AppleScript?

    How can I create a new Numbers Document through AppleScript?
    I try this:
    tell application "Numbers"
    make new document with properties {template name:"blank"}
    end tell
    But don't work.
    Where can I find documentation about it?
    Thanks

    If you try to invent your own syntax, you are starting on very wrong basis.
    The required syntax is defined by the Numbers AppleScript's dictionary.
    This one doesn't know what is a template.
    This is why, in the link posted by badunit, I use an other scheme to create a new document.
    I know that it's awful but it's the only one available at this time.
    Yvan KOENIG (VALLAURIS, France) samedi 4 juin 2011 11:25:25
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How can I create a new ring tone for my iPhone 4?

    How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?

    There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
    Make Ringable v1.1
    http://dougscripts.com/475

  • It wants to verify my account and won't take the password, how can I create a new one or verify the existing one?

    I cloud wants to verify my account and won't take the password, how can I create a new one or verify the one it won't take?

    If you can't remember the password, reset it at...
    iForgot.com

  • How can I create a new Music Library?

    Had to buy new laptop which of course has Vista. The old unit was acting up(I think Windows XP was corrupt), so I saved my Library Files but it looks like the old machine only saved portions not the whole Library. I had approx. 13,000 tunes (35GB) in the LIbrary and all that was saved seems to be 319 tunes. I have all the music on an external HD and only the Library was on the laptop. My question is, how can I create a new Library from the external HD music? Is there a way or am I SOL? Any suggestions and help would be greatly appreciated.

    You need the entire libary on the external, not just media.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847
    Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605
    Once you get a complete iTunes folder on the external drive, start iTunes with the option/alt key held down and select the iTunes Library.itl file on the external drive.  You will also need to do this with your main computer or the libraries will become unsynchronized.
    Alternatively you can make a separate library using the same media on the second computer. Start as you have been doing, let iTunes create a new, blank library file which will be on hte internal drive, set the media folder location in preferences to be the one on the external drive, then add the files to the new iTunes library. Unless you are a super-organized individual, or you don't care if your libraries do not have the same content, you are better off using a single library file that is on the external, not setting up separate library files.

  • How can I create a new entry without using LOV for foreign keys.

    Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
    How can I create a new employee without using LOV for the foreign key "job_id".
    On the first page I would like to choose the job_title from adf read-only table.
    After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
    Regards M.Winkler
    Edited by: user3541283 on 06.10.2008 03:44
    Edited by: user3541283 on 06.10.2008 03:50

    Hi,
    usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
    Frank

  • How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

    How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
    Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

    May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
    Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
    If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
    Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
    Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
    Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
    The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
    Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
    I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

  • I cannot recover my Master Password under 10.6.8. I want to change it. I do have my admin password for my account. How can I create a new master pw?

    I cannot recover my Master Password under 10.6.8. I want to change it. I do have my admin password for my account. How can I create a new master pw?

    If you are referring the Master Password that can be set in System Preferences>Security>FileVault, then see this thread:
    How to reset FileVault master password
    http://discussions.apple.com/thread.jspa?messageID=5822772
    As explained there, and for obvious security reasons, a new master password created in this fashion way will not unlock any pre-existing FileVault accounts. Resetting the master password is therefore only useful after you turn off FileVault in all existing accounts. You can then turn FileVault back on after the new master password is in place.

  • How can i create a new Adminstrator user account ?

    How can i create a new Adminstrator user account ?

    Go to the System Preferences>Users.
    Click the lock if and enter your password, if necessary.
    Then click on the "+" symbol below the accounts list.
    From the "New Account" menu, select"Administrator" and fill in the rest of the information.
    And finally click the "Create Account" button.
    Done. A new Administrator user account.

Maybe you are looking for