How can I create a recurring appt/event on calendar on ipad3? Ex: 12-1pm on Tuesday and Thursday for 2 weeks.

When I try to create an appointment that occurs for more than a day it appears on my calendar for the entire day and not the time that I want. Example: create an appointment on Monday, Wednesday and Friday for 12-1pm and goes for two weeks. I just want the appointment to show up on those 3 days for 2 weeks for that hour only. This task was very easy in Outlook but I can't seem to do it on my iPhone or iPad. I should mention that my phone is a 3GS and the iPad is 3rd generation. Thanks in advance for your help.

Thanks for responding. I'm an outside sales person and I create the vast majority of my appointments while I'm out of the office. When I'm in the office I certainly create them this way. It would be great if Apple could make this option available.

Similar Messages

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

Our home network has multiple devices connected by iCloud. Having problem with Calendar. On one iMac, all the events are duplicated. How can I correct that problem? Under the Calendar accounts, I had my Apple id listed and also just iCloud.

Our home network has multiple devices connected by iCloud: 2 iMacs, 2 iPhone 4s, 1 MacPro Laptop, and 1 iPad 2. When using Calendar, all the events were
duplicated on my husbands iMac. On his computer, under Calendar accounts, I had included iCloud and also my iCloud ID. I thought that because I had two accounts listed that were connected to iCloud, that might be the cause of the duplication. When I deleted ithe calendars from one of the accounts, it resulted
in deleting all of the events on all of our network devices!
I have since entered some new events into Calendar from my iMac and from my iPhone. These appear correctly on all devices except my husband's iMac where they are again all duplicated.
I have two questions: 1) How can I eliminate the duplicated events on my husband's computer and 2) How do I retrieve the old wiped out Calendar events from
Time Capsule. I don't know how to find Calendar in the Time Capsule. If I find the Calendar information in Time Capsule, how do I transfer it to my current Calendars?
I was obtaining phone help from one of the Apple techs at Apple Support, but our call was disconnected part way through. Didn't know how to reconnect with the tech.
Thanks for any help.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

How can I create a new color in the calendar?

Good day,
I wanted the to create a new color in the default calendar from Apple, but I do not know how that goes.
Perhaps someone can explain to me how this works.
I would be very grateful for any advice.

If you mean you want to change a color of a calendar category or create a new one, you cannot do that, what is pre-loaded is what you get and cannot be edited.

I am a teacher that has 3 personal devices and then 8 I use at school. How can I create two differnt accounts?, I am a teacher that has 3 personal devices and then 8 I use at school. How can I create two differnt accounts?

I'm an elementary teacher that uses 9 of my ipad 2's at school and I personally have an iPhone, iPod, and iPad.
How do I keep the accounts separate? I tried to create two apple ID's, using my home and school e-mail, but that isn't working. I don't know how to
keep the two separate the two. Do I need to use a different name on the account?

ktuttle64 wrote:
I tried to create two apple ID's, using my home and school e-mail, but that isn't working.
It should work. That's how you do it.

How can I create a playlist that syncs with my ipod touch 5 that plays both podcasts and music? Before updating to itunes 11 I was able to do it and now it seems that the power is gone. (I do not have the podcast app on my ipod touch 5)

When apple first introduced the podcast app for my iphone I discovered that installing it took away the option to have a playlist (smart playlist or regular) that mixed music, audiobooks and podcasts. I therefore quickly uninstalled it and was happy to have my iOS devices happily mixing music and podcasts.
With the push to itunes 11.1 and iOS 7 on my ipod Touch and ipad mini I no longer have mixed playlists. I do see (according to itunes) that the podcasts are copied to my devices but there doesn't seem any way to play them. Nor do my mixed format playlists contain them.
When combined with the change to the podcast tab in itunes that shows all available by default and doesn't seem to offer any way to Turn it OFF so I can easily see what new unlistened to podcasts exist it seems that the way I got used to using my itunes since my ipod nano first generation has been eliminated. I haven't read why so if someone could point me to their logic on how come I would want the changes they keep trying to force on me I would at least understand their motives.
If no one has a better fix I have discovered that I can declare the podcasts to be audiobooks and get them to play that way. One downside to that approach is that it doesn't clear them out of the podcast folder thanks to the change to the iCloud friendly format or whatever they were hoping for.

And what is the wording of the error message?

How can I create new user in such that its entries are stored both in profile server and ldap?

Portal only creates a user profile locally within its native ldap server. Two ways you can approach this is to either write a custom auth module that creates a user in the ldap server at the same time or handle it through replication.

How can I create a frame tool in photoshop similar to the frame tool in InDesign? and fitting the image in the frame tool proportionally just like in InDesign?

I am working on a project and I know it can be done in InDesign but I am halfway done in Photoshop so I just need to know if there is a way to do this similar trick.

One way is to use Select>Color Range
Make a new Color Fill Layer>White
(Layer>New Fill Layer>Solid Color)
Put a new color fill layer below>black
Just invert the layer mask on the top fill layer for the opposite effect.

How can I create a new Security Domain ?

Hi everyone,
I would like to know how can I create an Security Domain other than ISD ?(If my card support multi SD and delegated management)
I read Global Platform v2.1.1 ,but I don't know how can I create new SD practically(how can I write it's code ,how can I install it and how can I associate an applet to it,...).
if there is any document or link can help me ,please inform me.
I'll appreciate for any one if explain it to me step by step.
yours sincerely.
Orchid.

You're right, it is not visible looking at your script, but at the APDU log. /card is an internal JCShell script to do the following:
cm> /card
resetCard with timeout: 0 (ms)First the card is reset. This is analogous with /atr
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 34 31 56    ;.....1.EJCOP41V
    32 33 31 97                                        231.
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V231"Then an /identify command is issued.
=> 00 A4 04 00 09 A0 00 00 01 67 41 30 00 FF          .........gA0..
(163429 nsec)
<= 09 01 01 29 00 00 00 00 50 48 36 35 30 41 00 00    ...)....PH650A..
    6A 82                                              j.
Status: File not foundNow the Issuer Security Domain (ISD) is selected. You can do the same sending the JCShell 'select' command.
=> 00 A4 04 00 07 A0 00 00 00 03 00 00 00             .............
(650082 nsec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65    oe...........Y.e
    01 FF 9F 6E 06 40 51 70 92 29 00 73 4A 06 07 2A    ...n.@Qp.).sJ..*
    86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B    .H..k.`...*.H..k
    02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64    ....c...*.H..k.d
    0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09    ...*.H..k...e...
    2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01    +...Hd...f...+..
    04 01 2A 02 6E 01 02 90 00                         ..*.n....
Status: No ErrorThe answer is the File Control Information (FCI) returned by the ISD. The format is also described in GP.

How can i create slaes order using BAPI

hi all,
i didnt work on BAPIS .how can i create sales order using BAPI here i should pass Z values.
Moderator message : FAQ, search for available information. Thread locked.
Edited by: Vinod Kumar on Sep 13, 2011 12:22 PM

Hi!
There are a lot of answered threads regarding your question. Try searching first. Below is a sample link.
BAPI_SALESORDER_CREATEFROMDAT2
Regards,
Steph
Edited by: stephquion on Sep 13, 2011 8:25 AM

How can i create my own t-code

hi ,
how can i create my own t-code with a specified applications? may i know the t-code for create a t-code
Edited by: amarnath popuri on Nov 24, 2008 10:53 AM

Hi amarnath popuri
Use t-code SE93 to create a t-code.
Check below link.
http://help.sap.com/erp2005_ehp_02/helpdata/EN/43/2c43b427bf601fe10000000a422035/frameset.htm
Regards
Ashok

How can I Create a white hot spot.

How can I create a white hotspot in an image, i.e. A bright spot with feathered edges for a figure to walk out of, a bit like a sun?

Create new layer, make an eliptical selection, and fill with the colour of choice. A muted yellow perhaps.
Use a high value Gausian blur to soften and feather the layer. High values of blur will make the flare very thin, so if too thin, duplicate the layer.
Use Free Transfor to size and shape the flare.
or
Select the figure, and copy to a new layer.
Double click the new layer to open Layer Styles, and use Outer Glow, and some inner glow. This is by far the better option as you can control the inner and outer glow independantly.
or
Open a new document with a square aspect ratio. Make it at least as big as the other image.
make a new layer, and make foreground colour yellow, and BG colour white
Go Filter > Render Fibers. Use full strength, and a lowish variance. You are looking for strong, closely spaced vertical streaks.
Now go Filter > Distort > Polar coordinates. Make sure Rectangular to Polar is checked and OK it.
Duplicate the layer to your other image document, and place behind the layer with your figure on it.
You can play with the flare layer with curves, or maybe add a wee bit of blur and then harden with curves or levels
If you want the flare layer to overlap the figure a bit, Ctrl (Cmd) click the figure layer to load it as a selection, and add a layer mask to the flare layer. Move the flare layer above the figure layer. Now feather the layer mask, using the Mask Properties panel, or use Mask Edge options in the Mask properties panel to expand, or contract the mask.
Good luck, and let us see the end result.

How can i create a brand new account without a credit card ?

how can i create a brand new account without a credit card ?

There are instructions on this page for creating an account without giving a credit card : http://support.apple.com/kb/HT2534

How can I view my photos in "Events" like in iPhoto? How can I create events? I have 55,000 photos and 1700 events so the only way I can possibly manage my photos is using events that are one slide in size.

I have 55,000 images organized into about 1700 events. The only reasonable way to view my library is using events in iPhoto where each event has one image That still leaves 1700 images to sort through but that is a lot easier than 55,000 images. In the side bar is a folder with "iPhoto Events" but those views still show all of the slides. How can I create events and view my photos as events as in iPhoto? Events are critical for large libraries and has been my primary way to sort images.
Thanks!

I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update!

How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

Hi,
Sorry, we do not support a matrix-question field. Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
Thanks,
Lucia

How can I create a recurring appt/event on calendar on ipad3? Ex: 12-1pm on Tuesday and Thursday for 2 weeks.

Similar Messages

Maybe you are looking for