How can I create a Slieder with two thumb?

Hello forum,
who can help me to create a slider with lower bound and upper bound thumbs?
Thanks in advanced

Sounds pretty clear to me. He wants a slider where you have a slider with which you can set one value (a lower bound for example) and another slider (in the same control) that can set a 2nd value (an upper bound for example). Basically, a single control to select a range of values.
Google for images of: range slider
Anyway, I doubt JavaFX has something standard for this, but I'm sure it could be created.

Similar Messages

  • How can I create a document with two columns in which the text in the left hand column flows to the left column on page 2,3 etc, and doesn't interfere with the text I want to place in the right? Pages 5.

    I'm using pages 5 and want to comment in a right hand column, on a (latin) text which I wish to place in a left hand column.
    Ideally I'd like to be able to copy and paste the latin text and see it flow over into the left hand column on multiple pages.
    At the moment it is impossible for me to keep the text only in the left hand column Any help!?
    B

    Columns do what columns do, flow from the bottom of the left hand column to the top of the right hand next column. So won't do what you want.
    Your tag says you are using OS X 10.5.8 but you say you are using Pages 5 so one or the other is not correct.
    If you migrated up to Pages 5 what did you do with your previous Pages '08 or '09?
    Because Pages 5 is missing over 100 features, one of which is Textbox linking, that would allow to flow down through a series of Textboxes set up like columns.
    What you can do is run the Latin text down a narrow document to the left and add individual Textboxes to the right and put your English translations in those. The Latin will flow but the English will not.
    Peter

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts?
    Hi there
    My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
    What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
    This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
    How do I do this please?
    I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
    So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
    Any advise please?
    Thanks

    You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
    The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
    It's not meant to be a multiple user/multiple ID device.

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How can I create a solution with Livecycle

    I work for a high school and we have about 12 pdfs that we need parents to read/scroll through, then 10 (different) pages that we want them to print, complete and return to the school.  Finally, we want them to see a "Thank you, you have done all you have to do" type screen.  We want to make it as user friendly as possible so I was thinking...
    Reading pages, 1 at a time with next at bottom.
    Click next and it takes them on.  When they get to printing pages 1 print button prints all pages we need them to print. Click next, and it takes them to optional print pages.
    Click next and it says, thank you.
    How can I make this happen if I already have all the pdfs?
    Help please.
    John Dent
    [email protected]

    Thank you soo much.  A few questions?
    They weren't created in designer but could I just import all of them?
    How do "build the structure" for the naviagtion?
    Where/how do you add the script.
    Thanks again,
    John Dent
    Date: Fri, 30 Jul 2010 07:01:08 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I create a solution with Livecycle
    I assume that all of these PDFs were created in Designer. If so you can add any buttons that you want to appear on every page (Next, Previous) onto the Master page then there is script you can add to the buttons to actual move the pages (xfa.host.pageDown() and xfa.host.pageUp()). The Prin button can be added to the specific page and you can pass the page numbers that you want to print as a parameter to the print command. Lastly when you get to the last page and the click Complete you can display a messageBox with your Thank you message.
    Hope that helps
    Paul
    >

  • How can I create a query with tables in INFOSET?

    Dear Gurus,
    How can I create a query with tables in INFOSET?
    Just tables and fields INFOSET?
    Kind Regards,

    Hello
    Check following SCN Article for your understanding/reference:
    - [Using Infoset Query ,SAP Query and Quick Viewer|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5]
    Regards
    JP

  • How can I create a query with web service data control?

    I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

    Hi,
    This might help
    *054.     Search form using ADF WS Data Control and Complex input types*
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

  • How can i create a button with a dynamic picture?

    How can i create a button with a dynamic picture using
    mcLoader.loadClip
    I did create one with it doesnt seem to be working. It loses
    all its
    functions (eg onPress onRelease)
    Thanks

    I solved thep roblem anyway creating a mc.. then creating
    another MC withing
    the first MC and i change the picture on the second MC. And i
    apply the
    propierities to the first MC , and works
    If i have troubles with mu sistem on the future I will use
    yours!
    Thanks!
    "the fleece" <[email protected]>
    escribi� en el mensaje
    news:e67i88$jlf$[email protected]..
    > the image loading will remove any properties or
    functions the mc had.
    >
    > you need to apply them in the onLoadInit function
    >
    > mclListener.onLoadInit = function(target_mc:MovieClip) {
    > target_mc.onRollOver=blah blah
    > };
    > var image_mcl:MovieClipLoader = new MovieClipLoader();
    > image_mcl.addListener(mclListener);
    > image_mcl.loadClip(blah, blahblah);
    >
    >

  • How can I create a video with effects using my ipad?

    How can I create a video with effects (sepia, B&W, Negative, oval or any other shape borders) using my ipad?  I would Like to keep a higher res and also be able to shrink it down to email or send in a MMS. Or should I just upload it to my PC and mess with it there? Some of the apps I have are very easy to use compared to the learning curve needed for video editing software.
    Thanks

    Thats the Problem . . . how many apps do I have to try until I find the one I want? I noticed a few will render the video thus losing its original size. When I went to edit it more in iMovie the video was smaller--not good. And what software do you suggest, Templeton, for the PC? I love the apps because they are easy. I dont have hours to mess around on a software to figure out if its something I want. Im looking for simplicity. Maybe Ill get more into it later. I just want to record simple video of my playing the guitar for self analysis and create a short video for family and friends.
    Apps:
    iMovie
    CinemaFXV
    VideoFix
    Cartoonatic
    Video illusion
    VidEditor
    Software:
    Windows Movie maker (wont accept .mov files)
    After Effects (Too little time, so much to learn)
    Wondershare (Very easy but little choices)
    VideoPad (Again. Few choices)

  • HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

    HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

    Olga, this is not a default feature in iPhone. You need a 3rd party application. I have created a free one, Easy Group, for group texting and group emailing.
    http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
    Rémi
    Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

  • How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

    How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

    Hi Libby,
    Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
    Click the Charts button and choose the Scatter chart.
    The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
    Click the gear icon at the top left of the selection and choose Share X Values.
    You should see a result similar to this:
    Notes:
    The values on my sample table contain a random element, so they have changed from thhe first image to the second.
    The chart is as created by Numbers, with two edits:
    Data points have been connected with curves, using the Chart nspector.
    The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
    Regards,
    Barry

  • How can I create drop shadows with PSE10

    How can I create drop shadows with PSE10 & PE10?

    Layer styles let you quickly apply effects to an entire layer. In the Effects panel, you can view a variety of predefined layer styles and apply a style with just a click of the mouse.
    Three different layer styles applied to text 
    The boundaries of the effect are automatically updated when you edit that layer. For example, if you apply a drop shadow style to a text layer, the shadow changes automatically when you edit the text.
    Layer styles are cumulative, which means that you can create a complex effect by applying multiple styles to a layer. You can apply one style from each style library per layer. You can also change a layer’s style settings to adjust the final result.
    When you apply a style to a layer, a style icon appears to the right of the layer’s name in the Layers panel. Layer styles are linked to the layer contents. When you move or edit the contents of the layer, the effects are modified correspondingly.
    Once you choose Layer > Layer Style > Style Settings, you can edit the settings of a layer’s style or apply other style settings or attributes available in the dialog box.
    Lighting Angle Specifies the lighting angle at which the effect is applied to the layer.
    Drop Shadow
    Specifies the distance of a drop shadow from the layer’s content. You can also set the size and opacity with the sliders.
    Outer Glow Size Specifies the size of a glow that emanates from the outside edges of the layer’s content. You can also set the opacity with the slider.
    Inner Glow Size Specifies the size of a glow that emanates from the inside edges of the layer’s content. You can also set the opacity with the slider.
    Bevel Size Specifies the size of beveling along the inside edges of the layer’s content.
    Bevel Direction Specifies the direction of the bevel, either up or down.
    Stroke Size Specifies the size of the stroke.
    Stroke Opacity Specifies the opacity of the stroke.

  • How can one use Mission Control with two monitors?  Please bring Spaces back

    How can one use Mission Control with two monitors.  With Spaces I could treat each space as a single desktop.
    SyBB

    I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
    Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

  • How can i creat several rectangles with one draw rect.vi

    how can i creat several rectangles with one draw rect.vi? thanks
    Solved!
    Go to Solution.

    You can call it in a for loop, with an array of the rectangle coordinates you want to draw. Is this what you mean?
    CLA, LabVIEW Versions 2010-2013
    Attachments:
    rectangle.png ‏11 KB

  • How can I create additional security with my ipad on a shared office network?

    How can I create additional security with my ipad on a shared office network?

    Haven't heard of any security explotes on the iPad.  That should tell you security has been built in.
    Great password.  Set up remote wipe in case iPad goes missing.  Backup iPad regularly.
    Robert

Maybe you are looking for