How can I create a whitelist of banking websites based on the server certifcates of legitimate sites?

I want to configure FF so that I can optionally activate a whitelist of my legitimate banking websites. When the whitelist is turned on, FF should only be able to display those sites. When the whitelist is turned off, FF works as usual and displays all sites. I would create the whitelist by visiting my banking websites and somehow adding the server certificates of those sites to the whitelist. So the whitelist would consist of the server certs of my banking websites. When whitelisting is then turned on, FF would allow me to visit only those sites whose server certs match those on the whitelist. This would protect me against phishing sites. How can I do this? Thanks

I believe that did it! Thank you. I am running those changes on a secondary E-Mail address for the same job and server and it appears to be working properly.

Similar Messages

How can I create a fIlter to delete only "junk" from the server?

One of my E-mail accounts is that of a major client. I handle their customer service online. Normally our protocol is to always leave all messages on the server, so for that one Thunderbird account, I have it set to never delete messages on the server.
But the account recently started getting a lot of junk messages. Thunderbird is doing a remarkable job at marking those and placing them in the junk folder for that account. I would like to create a filter that could remove them from the server, preferably those more than "x" days old so I could monitor the activity to be sure that no important message are removed.
I did notice that in "Filters" I can create a custom filter from a header of my choice, but can't seem to create what I want which is:
- after mail is marked as Junk by Thunderbird to delete those messages from the server if they are older than "X" days (my choice of "X").
- not delete any other messages from the server for that account

I believe that did it! Thank you. I am running those changes on a secondary E-Mail address for the same job and server and it appears to be working properly.

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can I create a card with only a picture on the front - inside blank

How can I create a card that only has a picture on the front and the inside is blank?

Use the Holiday Colors theme for a folded card. For the outside select the layout that just includes a full page photo. For the inside select the layout that suits your eye..
As far as the text boxes are concerned just put a single space in them and then order.
OT

How can I create a client console and work together with the Cache Server?

How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
The following is the cache server file: contacts-cache-server.cmd
@echo off
setlocal
if (%COHERENCE_HOME%)==() (
set COHERENCE_HOME=c:\coherence
set CONFIG=C:\home\oracle\coherence\Contacts
set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
:exitEdited by: junez on 23-Oct-2009 09:20

Hi
To run the console, change DefaultCacheServer to CacheFactory
Paul

How can I create a form requesting a digital signature at the end?

I'm looking to create a form for a meeting that allows attendees to fill out their address and pertinent information as an agreement and at the conclusion of the form give them the option to sign electronically/digitally.
How can I do this? Is Adobe Forms the best program for this?

Hi,
Unfortunately, digital signatures are not supported in Adobe FormsCentral.
In order to collect signatures from the attendees, you can either use Adobe EchoSign to collect electronic signatures or Adobe Acrobat to get the documents digitally signed.
Please follow the links to know more about the services:-
Adobe EchoSign:-Electronic Signature Software, Digital Signatures | Adobe EchoSign
Adobe Acrobat:- PDF converter, PDF editor, convert to PDF | Adobe Acrobat XI Pro
Regards,
Nakul

How can I specify different settings in CustomSettings.ini based on the OS that is being deployed?

I originally thought this could be achieved using "OSVersion" or "OSCurrentVersion" but (unless I'm mistaken) those variables are in fact tied to the OS from witch you actually launch the MDT Wizard right? i.e. say I run MDT from within
Windows PE to deploy Windows 8. The "OSVersion" and "OSCurrentVersion" will contain values for the Windows PE instance that is currently running MDT and not the Windows 8 OS I am actually deploying right? Assuming that is the case then
is there some variable in MDT that stores version information about the OS you are currently deploying? If so can I use that in CustomSettings.ini to specify different settings for specific OSes I deploy?

Rens,
First thanks for responding. Next please don't take my response the wrong way but this is a bit of a pet peeve of mine. Maybe I'm just "doing it wrong" but I have used the TaskSequenceID trick in the past and thats actually where my problem lies.
Too many people are recommending this course of action without including the caveats. Your response implies that using TaskSequenceID is as simple as just adding "TaskSequenceID" to priority and then creating entries based on the TSIDs themselves.
In reality getting this to work is far more challenging. One needs to only check the following threads (and several others) for the issues other people are having when they try to use TaskSequenceID in CustomSettings.ini:
http://social.technet.microsoft.com/Forums/en-US/e17a1952-d1f7-41ef-8231-0d6fcc41882e/mdt-2012-settings-per-task-sequence?forum=mdt#f0810428-e6fd-468e-8c76-ca18b210c191
http://social.technet.microsoft.com/Forums/en-US/320aafee-07d2-4b96-9138-a902fec7edf5/mdt-2012-custom-rules-by-tasksequenceid-not-working-now
In fact, following the steps outlined here was the *only* way I was able to get TaskSequenceID to work for me:
http://www.the-d-spot.org/wordpress/2012/07/20/how-to-use-different-settings-per-task-sequence-with-mdt-2012/
Even then its causing some erratic issues in some areas like button lag in the Wizard because ZTIGather has to run twice and pre-checked Applications in the wizard still installing even if they are unchecked. Since my needs are more OS-specific (as opposed
to Task Sequence specific) I was hoping for a better solution. I suppose I can check BDD.log but I was hoping someone here had already encounter this same issue and hit upon a solution they could share.
Anyone?

Can I create a custom SCSM task that runs on the server?

I'm new to SCSM (got roped in as the developer/Powershell guy). I see instructions for adding a custom task to SCSM, which I know generally run from the user's console, under their security context. I also found a reference to "runtime tasks" which
run from the server. Is there a way for me to make a custom task that runs from the server?
If it helps, I'll be creating a task that implements the Poweshell script found
here that converts an incident to a service request. I'd much rather the conversion take place on the server so that we don't need to deploy the SMlets Powershell module (and another dependency) on each user's workstation.
Thanks!

I'm new to SCSM (got roped in as the developer/Powershell guy). I see instructions for adding a custom task to SCSM, which I know generally run from the user's console, under their security context. I also found a reference to "runtime tasks" which
run from the server. Is there a way for me to make a custom task that runs from the server?
If it helps, I'll be creating a task that implements the Poweshell script found here that converts an incident to a service request. I'd much rather the conversion take place on the server so that we don't need to deploy the SMlets Powershell module (and
another dependency) on each user's workstation.
Thanks!
Not sure what capabilities you have, but would something like this be useful?
http://scsmlab.com/2013/12/09/how-to-create-a-custom-scsm-console-task-by-using-some-c-and-xml-magic/

How can I get my iPod to update when it says the server cannot be connected?

Whenever I try to update my iPod it says, "The iPod software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." It does this every time. How can I get it to update? Any help is much appreciated, thanks!

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Can't create a new account at ePrintCenter - trouble with the server for 2 weeks.

Hi. I'm trying to create an account at ePrintCenter and all the time getting mesage 'Возникла проблема с сервером. Проблема будет устранена в ближайшее время. Приносим извинения за неудобства.' (A trouble with the server, wait, bla bla bla). When will it be fixed?

For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee

TS3899 How can i delete 3564 old emails that have come from the server on setting up my iphone in 1 easy move

How do I delete 3654 old emails that have been delivered when I started the new iphone?

Log onto the server through your email providers web interface and delete them there.

How can I create prefilled and editable PDF's on a Linux server with PHP?

I can create PDF's with editable form fields (extended features?) and serve those to our users and I can pre-fill form fields with data from the database using FDF, but then the PDF throws an error and the end user can't fill out the remaining fields (in Reader, it still works in Pro).
I've tried 2 open source approaches already, but the end result is either a fillable form or a pre-filled form. I can't seem to do both at the same time.
I've looked around adobe.com and frankly there's just so much stuff there that isn't even applicable it's staggering. I am completely lost and resorting to asking a question on a forum. I've searched these forms (and others), but anything related to this problem have no answers. I'm sure there's a way to do it.
If I try to set the PDF to fetch the FDF using a http post/submit (can I get it to do that when it loads?) I would still have to get an id number into the query string or object on a per document basis (some how?) and that means editing the PDF server side which breaks the structure which then throws the error on the client side and I'm right back at the beginning again.
At this point, it looks like it's going to take less time to simply create the form in HTML with a unique CSS file for the print version using a PNG for visual elements instead of a PDF. Not a great way to go for printing, but it would only take a day to set up. The time to create new forms is the issue. I don't want to spend 8 hours creating new HTML forms when I can do a PDF in 2 hours. Is it more efficient to go with an Adobe solution or roll my own HTML version?
All I want to do is help the users save some time by pre-filing part of the form so they can print it.
Any advice?

Ok, I hope someone can move this to the Adobe Reader for Android forum, where you will find the experts you need.

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

How can I create a buffer, array or pipeline that stores the last 5000 dates of a voltage measurement with PCI6036 & SCXI1104C and continously drops the last date and inserts the latest date (scanrate 200 or 2000Hz)?

I develope a porgramm for continious monitoring. If the voltage of a channel exceeds or is lower than the upper or lower limit of tolerance the actual date must be stored and additionally the dates being stored 10sec before and after this event. Can somebody give some advice how to create the buffer to keep the dates 10s before the error event? Thank U.

I've written you a quick array buffer vi. I'm not sure if it'll be fast enough though.. Try it and see! I've used the loop numbers in my array, but i'm sure you can feed in the dates instead.
Attachments:
Array_buffer.vi ‏26 KB

How can I create a document with two columns in which the text in the left hand column flows to the left column on page 2,3 etc, and doesn't interfere with the text I want to place in the right? Pages 5.

I'm using pages 5 and want to comment in a right hand column, on a (latin) text which I wish to place in a left hand column.
Ideally I'd like to be able to copy and paste the latin text and see it flow over into the left hand column on multiple pages.
At the moment it is impossible for me to keep the text only in the left hand column Any help!?
B

Columns do what columns do, flow from the bottom of the left hand column to the top of the right hand next column. So won't do what you want.
Your tag says you are using OS X 10.5.8 but you say you are using Pages 5 so one or the other is not correct.
If you migrated up to Pages 5 what did you do with your previous Pages '08 or '09?
Because Pages 5 is missing over 100 features, one of which is Textbox linking, that would allow to flow down through a series of Textboxes set up like columns.
What you can do is run the Latin text down a narrow document to the left and add individual Textboxes to the right and put your English translations in those. The Latin will flow but the English will not.
Peter

How can I create a whitelist of banking websites based on the server certifcates of legitimate sites?

Similar Messages

Maybe you are looking for