How can I create different headers in Pages 09?

I hope someone can explain to me how to solve this issue: I'm creating a simple training manual and I want the different chapters to appear in the header of the page - Chapter 1, Chapter 2, etc. Left and right pages are different because the margin has to be different for binding. Chapter 1 ended on an even page (a "left page.") I inserted a Section break at the bottom of that even-numbered page hoping to start a new section on the next page (odd numbered), and change the header to Chapter 2. However, to my surprise, when I changed the header to Chapter 2, all the previous headers for odd-numbred pages also changed to Chapter 2. Is there a way to prevent this from happening?
On the Layout inspector, under Section, I only have checked the option "Left and right pages are different." Everything else is unchecked. I'm using version 4.2 of Pages 09 under Mountain Lion OSX.

"Left and right pages are different because the margin has to be different for binding.
Chapter 1 ended on an even page (a "left page.") I inserted a Section break at the bottom of that even-numbered page hoping to start a new section on the next page (odd numbered), and change the header to Chapter 2. "
For the specifications above, the Inspector settings for Section 2 should be as shown in the image below:
Section break at the end of the text for Chapter 1. If you have "Section starts on" set to "Right Page" your next section will start on the first recto page after the section break, inserting a blank page if necessary. You can also set this menu (red arrow) to start the next section on Any page (it will start on the next available page) or the next Left page (it will start on the lext verso page—an unusual setting).
Page numbers may "Coontinue from previous section" or may re-start for this section, beginning with a value you set in the box (purple arrow).
Left and Right are different (green arrow) allows a different header or footer on facing pages (eg. Book Title on verso, Chapter title and page number on recto). Note that this setting does not change 'Right' and 'Left' margin options to "Inside" and "Outside." That change is made by checking the Facing Pages checkbox in the Document Inspector.
Finally, unchecking 'Use Previous headers & footers" allows editing the headers and footers in one section without changing those for the previous section. Note that the edits will take effect in the section containing the insertion point when the edit is made.
Regards,
Barry

Similar Messages

  • How can I create different left/right page numbers?  I am putting together a book for publishing on Amazon ... I need to submit a .pdf file.

    I am putting together a book of drawings for self-publishing on Amazon.  I want to add page numbers, but I want the place the page number on the right side of odd-numbered pages and on the left side of even-numbered pages.  Is there a way to do this in Pages?

    What version of Pages on what version of OSX?
    Pages 5.2 has no facing pages.
    In Pages '09, Facing Pages is in the Document Inspector.
    Peter

  • How can I create more than 1 page?

    How can I create a document that is several pages. When I get to the bottom the text diappears.

    Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
    You can see the difference if you use Alt+F to open the File menu or Alt+B to open the Bookmarks menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
    * "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
    * "Bookmark This Page" can be accessed via the right-click context menu of that browser page.
    * "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
    See also:
    * [[How do I use bookmarks?]]
    * Bookmark All: https://addons.mozilla.org/firefox/addon/bookmark-all/

  • How can I create links to other pages in iBooks that will function in PDF?

    Hi,
    I know some people have asked previously how to create links to other pages of their book within iBooks. I having an issue with this myself that I haven't been able to resolve. I am able to create the links, and they seem to function within the program, however, once I export the document as a PDF file (the format in which I need to have this ebook!), the links seem to be non-functional. Does anybody have a fix for this?
    Thank you so much for any suggestions you may have!! I really need to figure this out for my client.
    Regards,
    Meggyn

    Exporting as a PDF does alter/lose/remove certain functions. Adobe Acrobat has its own page navigation system.
    A lot of the hidden engine of iBooks Author is basically very similar to building a website! so links and books marks are an "internal" function.
    IF you  have Acrobat and not just the Adobe Reader, you can make links.  I have never needed to try, but  I see a working link related index  in the many software manuals  I have.

  • How can I create a checklist in Pages (not Numbers) ?

    Hello all,
    Just curious if ANYONE out there has figured out how to implement a checkable checklist in Pages.  I am familiar with the Checklist template in Numbers, but it is not very pretty, for lack of a better word.  I need to create a stylish checklist in Pages that I can email out to employees, they can fill out, and send back.  Any suggestions?
    (I am also familiar with the check boxes in the Image Bullets section of Inspector, but it is too complicated for some of my less tech-savvy employees to go change the bullet for each line they need to check off - not to mention a hassle.  The intuitive thing would be for them to be able to simply click on the empty box, at which point a check would appear.  Please help.)
    Thank you!
    Jen

    The clean soluce is to build your own template matching your taste in Numbers.
    Yvan KOENIG (VALLAURIS, France) samedi 23 avril 2011 11:06:02

  • How can I create a message board page?

    Does anyone know how to create a message board page?
    Thanks.

    Forumotion definately. You can do so much with their forums from template editing, theme uploading, pure HTML page creating...they are the best i have been with.
    If you haven't got much time, and want to see what the new phpbb3 can offer, just try it out on this host : free forum hosting

  • How can I create and design a page UI from blank page in jdev10g?

    Hi.
    How can I implement a page from scratch page?
    I can create a master-detail page as the OBE site.
    But I'm not sure how to create page using component pallets, instead drag data-control model to page.
    It means I should design UI with component pallets,
    How can I do?
    Thanks.
    Edited by: user10615931 on 2009-8-18 上午4:13

    Thanks.
    It is helpful to me.
    What I want to do is use component pallets and add action to the component for creating a page instead using executeWithParam operation and drag view object from datacontrol to create page.
    How can I do?
    Thanks

  • How can you Create a folder in pages?

    I ve many documents all mixed together.. Can u create folders inside pages app...?
    Thanksss

    Indeed you can: http://help.apple.com/pages/ipad/2.2/#/tan724890f7

  • Hi. I want to build a GUI based on several windows appearing following a certain sequence. How can i create different windows in the same VI? Also, i want the front panel of a subvi to appear when i run, how can i enable this.Thanks

    Having several windows appear ...

    Hi,
    You can't create several windows for one VI. But you can use the "Tab Control" and change tab's in the program. Or you can use sub VI's and show ther front panels.
    To show the front panel of a sub VI you have to open the VI you want to show and select "File->VI Properties". In the VI Properties window select Category "Window Appearance" and click Customize...
    In the Customize Window Appearence window, here you can set a number of attributes for how the window will appear, select "Show front panel when called" and "Close afterwards if originally closed" click OK and OK and save the VI, done.
    Now the VI front panel will appear then you use it as a sub VI.
    /Thomas

  • How do you create different headers on each page of a document in icloud pages?

    I have to have a different header on my title page than the rest of my paper.  I believe I did it once before but it may have been in the regular pages program on my Macbook Pro.  I was wondering if there was a way to do it on the icloud and ipad versions of pages due to I do most of my work away from my laptop.
    Thanks!

    I found on my computer, if you click on the header you can change it on each page.  There is also a place in Set Up under Sections at the bottom of the page that has a drop down to create a new Section either 'Starting with this section' or 'After this section'.  Hope this helps.  Also at the top there is a place under Headers & Footers to  choose either 'hide on first page of section' or 'match previous section'.  I believe if you deselect the 'match previous section' you can easily change the header or footer for each page.

  • How can I create a redirect - on page not found?

    I have asked this before but things have changed since....
    I am editing a site on a NON-LINUX server, one which can use VB code...
    The problem is that there are a lot of obsolete pages and I want to remove them
    I want to put a sitewide function in place so that if anyone types in an obsolete page through the whole site then it redirects to a single page with an apology and a link to the home page of the site...
    Someone said it could be done on a linux server, but this is not one of those... so please could someone explain IF and HOW it could be achieved on another server...
    Thank you
    Terry

    What you are asking for sounds like a 404 error page.  That's easy.  In the IIS manager navigate to the site you are managing and change the path of the 404 error page for that site to one you have created.  If you are on a shared host you should be able to edit the web.config file like:
    <configuration>
      <system.web>
        <customErrors defaultRedirect=”http://mysite.com/errors/Error.aspx” mode=”RemoteOnly”>
           <error redirect=”http://mysite.com/errors/404.aspx” statusCode=”404″ />
        </customErrors>
      </system.web>
    </configuration>

  • How can I create a Splash / Welcome Page before the home page

    I'm trying to create a splash page to inform our users about some changes to the site before they enter the site. I created a new page in the top menu by clicking the left X of the home / index page, which is the result that wanted. But when I click on site properties of this new splash page it has inherited the "index.html" filename and when I export the HTML my home page is now named "index1.html."
    I'm concerned about the effects this will have on our SEO and analytics, so I was wondering if there was a work around for this. Basically I'm looking to have the Splash page with the new information be the first thing visitors see with a button that allows them to enter the main site sfter they've read the information. But I don't want to compromise the page structure by adding another index page or renaming the existing index page.
    Is this possible? Or can someone suggest a way to accomplish this in MUSE?

    CRESDesigner wrote:
    ...Is this possible?...
    Not quite, if you are concerned about SEO. Introductory or 'splash' pages are terrible for this and can hurt your search results even after you pull the splash page down. In regard to SEO, we already shoot ourselves in the foot by using Muse. Be careful about compounding this with a splash page.
    Ideally, your web site would check for the existence of a cookie that identifies if the visitor has seen the alert. If the cookie is not present, a DIV overlay would be presented with your alert. Once that alert is presented, the cookie would be written to prevent further display of the alert. You could achieve this in any other web design program (or text editor) today, or you can submit a feature request and wait for Muse to offer this functionality in months/years.

  • How can I create only thumbnails photo page without larger photo

    Is there a way to create photo page without the larger photo?

    I wonder if you can use a photo template page to drop your photos into and then just leave off the slideshow button. I wonder if that will disable the click to enlarge photo function or if it just affects the slideshow stuff.
    Otherwise, you could manually make your thumbnails page...like a contact sheet.
    1. Use something like iPhoto to export photos scaled down to thumbnail size, like 100x133, into a folder on the desktop
    2. Drag and drop thumbnails from this folder into iWeb using blank template page.
    3. select all the thumbnails, open up the Inspector ruler tab, click on "Use orignal size".
    4. Arrange thumbnails in desired order and position on page.
    This is a complete manual job. I don't know if there is any other way besides disabling the slideshow function. I would probably live with the "click to enlarge" function over making a contact sheet by hand.

  • How can I create mirror margins in Pages 5.2?

    Hello! Maybe someone can help me. I need to have mirror margins but I think Pages 5.2 hasn't got this option... Any ideas?

    Amazon sells iWork '09 as a boxed DVD set, Pages '09, Keynote '09 and Numbers '09 for US$26.99.
    Just make sure you update them to the latest v4.3:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&mforum=iworktips ntrick
    Peter

  • How can I use different presets on the same instrument?

    I use Session Horns Pro with Kontakt Played in Mainstage 3.
    You can choose different presets within Session Horns without having to load additional samples and take up more memory.
    How can I create different patches that use the changes of Session Horn Patches without duplicating the samples in Kontakt?
    If I copy the channel strip and 'Paste as alias" changes made to one copy are the same as the alias. It seems there must be a way to "Automate" controls in an alias that is unique to each patch. I could also use to do this on instruments like Vintage Clav and Vintage B3 where I don't want to create duplicate instances of CPU hungry plug ins just to use different presets in different patches.
    Thanks in advance to anyone out there who knows of a workaround!
    Larry Ketchell

    Yes.  You can sync apps/music/etc to as many of your iphones/ipads/ipods as you like.
    Here is how to use the iphone without a wireless plan:
    Using an iPhone without a wireless service plan

Maybe you are looking for