How can i create Level Based Hierarchy using multiple logical table.

Hi All,
in my use case i have two master logical table.
Division_Mst(divncd,DivnName)
Department_Mst(deptcd,DeptName)
and one logical table which contain both column Header (divncd,deptcd)
and fact table detail where one measure column(empcd) using aggregation count on it.
so i want to create levelbased hierarchy like this.
DivnName
|------DeptName
which are come from(Division_Mst,Department_Mst) .
so user can see no of employees division wise and drill down to Department wise.
How can i achieved this?
thanks
Manish

Check out Shay's blog https://blogs.oracle.com/shay/entry/adf_faces_dynamic_tags_-fora
Timo

Similar Messages

How can we create an entity object using multiple tables?

Hi All,
I'm a newbie to OAF.
I'm trying to create a simple page using OAF.
While creating Entity object, there is an option to add the database objects from which we can create our Entity Object.
There we can enter only one database object.
If suppose I need to create a Entity object by using mutiple data base objects, how can I add other database objects?
Is there any option for multiple selection of database objects there?
Thanks in Advance

User,
a). You should use the [url http://forums.oracle.com/forums/forum.jspa?forumID=210]OA Framework Forum for this question.
b). Entity objects always correspond to a single table. I think you want to create a View object instead.
c). Really, you want to be using the OA Framework forum.
John

How can I create a new label using Pages and Avery Labels products?

How can I create a new label using Avery LAbels and PAges on an imac?

Contacts prints to Avery labels.
Otherwise just open the appropriate Word template from Avery's website, in Pages.
Peter

How can we create such navigation buttons using Flash CS4?

Hi,
How can we create such navigation buttons using Flash CS4 is in the following website? Please help me with any such tutorial to make my custom navigation bar/buttons.
http://city.reallusion.com/join.html
Thanks.

While the Note 4 is a reasonably large device it still falls into the phone layout bucket. We need this layout to function on very small screens some as low as 320 pixels high and 240 pixels wide. These sorts of devices don't have the space for a full toolbar.

HT2589 how can i create apple id without using credit card details ?

how can i create apple id without using credit card details ?

@Limnos - that doesn't work anymore. There is no NONE option. I've been at it for hours trying to set up my daughter's account. I've tried creating and verifying an appleID on the web, on her touch...everything. Every single time you get to the stupid Touch, it wants to walk you through the verification of the account and it demands payment (even for their suggested apple Remote method listed in the KB).

How can I create a Online Store using Muse? (with not Business Catalyst)

How can I create a Online Store using Muse with not Business Catalyst for example three services
_ttps://orders.self-pub.net/checkout.php?m=fastcheckout
_ww.self-pub.net/services/covers.html

Hi,
Unfortunately there is no option stand alone in Muse to create an online store. However if any hosting plan uses CMS feature like Business Catalyst and ecommerce using modules and tags, you can use the same proceedure as for Business Catalyst and integrate that system and host the Muse site on their platform and that would work.
There is other thing that you can try is, Insert HTML codes to link the pages and some contents in Muse to your desired CMS. What you can also do is after you create the site in Muse, you can export the Muse site and get the layout and design of your site and copy paste the codes for pages with some HTML and coding skills to integrate with your desired hosting.
Hope this helps.
Regards,
Rajan

How can I create a Online Store using Muse?

How can I create a Online Store using Muse?
I have been looking around for solutions but I can't find one.
I was just hoping that someone else might have known of a way.
Thanks!

Since you can access the Alpha File Manager it means the option to "Enable online content editing (incompatible with Muse)" is ticked up under your profile details. With this enabled you can create Web Forms under Site Manager. Once you create the contact form open the Alpha File Manager (AFM), select the page where you want to insert this and choose the Web Forms from the right hand column. On the pop-up window select the web form to insert and click Insert.
Regarding the upgrade, as long as the site is in trial mode you can choose any plan for the site, see my answer #7. Create a new trial site, choose the link to the new trial site created from PP and publish your site there for testing purposes so you will have ecommerce included and available for you to try out.
If things go well you can request an upgrade to your current site to have the ecommerce included (the only situation in which this upgrade won't be available is when the site is published on one of the 5 sites received with the CCM subscription, they are webBasics and cannot be upgraded: http://www.adobe.com/products/creativecloud/publish-anywhere.html under "Publish websites" section, and the option will be to create the site from partner portal and publish the content from Muse)
At this moment indeed there's little documentation on how to integrate the two but this is because Muse is just not ready to take advantage of BC capabilities. It was never intended for CMS features of BC to be available in version 1 of Muse. This has already been mentioned a few times (one relevant example: http://forums.adobe.com/message/4355214#4355214#4355214)
Regards,
Cristian

How can I create a website easily using Mac products?

how can I create a website easily using Mac products?

By using iWeb if you have it and if you don't have iWeb, there are lots of other Mac compatible products that you can use instead such as RapidWeaver, Sandvox, Freeway Pro/Express 6, WebAcappella 4, Flux 4 and Quick n' Easy Website Builder.
Just do a search of this forum and you will see literally hundreds of post on this topic.

I got 3.95GB available on my flash drive and need 4GB to reinstall lion osx how can i create space on usb using Disk Utility ??!

I got 3.95GB available on my flash drive and need 4GB to reinstall lion osx how can i create space on usb using Disk Utility ??!

What is the capacity of the flash drive?
You might also be able to reinstall Lion without a flash drive, by booting up the computer holding the Command + R keys, and choosing Reinstall OS X.

How can I create a single order from multiple quotations?

How can I create a single order from multiple quotations that I have created by the transaction VA21 ?
Thanks in advance for the answers.

hi
Go to transaction: /nva01
Enter order type : ZOR
Sale org :xxxx
Dist.channel:xx
Division :xx
Press enter
Click on Sale document and select Create with reference
Then enter 1st quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation1 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 2nd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation2 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 3rd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation3 copy to order.
Now save the sale document.
Kindly give reward points
Edited by: WISH on Mar 19, 2008 2:25 PM

How Can I Create One Entry Sheet For Multiple Line Items of A PO

Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

hi,
It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
you have to make different service entry sheets for different item of service master.
regards
Manish Joshi

How can i creat CRC 32 CHECK WITH THE lookup table as attached.

how can i creat CRC 32 CHECK WITH THE lookup table.attached
i creat one,but not match the result number C++ version
result number C++ version:
FE 00 18 02 40 1E 65 43 00 03 E8        CRC32=>78 1F E9 06
FE 01 18 02 40 1E 65 43 00 03 E8        CRC32=>F8 8F 49 61
FE 02 18 02 40 1E 65 43 00 03 E8        CRC32=>7D FF B4 7F

due to some reason i can not attach the table.but you can find it herehttp://lavag.org/topic/15325-crc32/,it in the CRC.llb 84.03K =>CRC-32 Table.ctl thanks a lot

How can I create an app without using a Mac?

I want to create my own apps for my iPhone. How can I do that when I have a Windows computer?

The steps for that would be:
1. Find your car keys (if none found, purchase car)
2. Get in your car.
3. Drive to nearest Apple Store.
4. Inform the staff you are converting and wish to dispose of your pc.
5. Hand over your pc.
6. Buy a Mac.
Then you have 3 options:
- Download XCode 3.2 for free
- Enroll for a Developers Membership and get XCode 4 for free
- Go to the Mac App Store and buy Xcode 4.
I hope I helped.

How can I create a "master" document with multiple variations?

I designed a map that will be posted at a few dozen junctions with a "you are here" symbol. Every one will be identical with the exception of this symbol. I don't know if there is any way to do this while preserving a "master" map that can be edited all at once. For example, I may need to change the location of the paths and it would be a real time saver if I didn't have to edit 20+ files (each with an arrow in a different spot but otherwise the same) separately. Also, I will be sending the file over email to a professional printer, so I am very uncertain about what would be a standard way to format something like this and really wouldn't want to clog their email.
I haven't been able to figure out an easy way to do this. I'm wondering if it involves using multiple artboards, a feature that I'm not very familiar with, or if the easiest way is to have a layer for each symbol location and just save twenty files (whew) and send them to the printer as separate documents - which seems super clumsy.
I have tried copying the artboard multiple times. This was my best attempt at editing all at once: I created whatever I needed on one artboard, then dragged it to the symbols panel, then cut, then went to edit > paste on all artboards. However, this doesn't allow me to simply fiddle with a path or object that already exists and I can't figure out how I would delete the same object from all artboards.
If anyone has some thoughts, I'm pretty novice, so please keep it in simple terms. Also, I am in a bit of a time crunch, so speedy answers are much appreciated! Thank you!

Alright, that makes sense. And yep...I've never worked with a professional printer so I wasn't sure if it is standard to have something that will require that much involvement in the set-up on their part, but I guess it's preferable to sending a bunch of separate documents. Thanks so much for your help, Larry!

How can I create a XMP List with multiple selection

Hello,
I try to build my own XMP custom panel. Herefore I need a couple of lists with the possibility for multiple selections (e.g. the choice for one language or multiple languages).
But how is it possible to integrate a list into a panel? There is no XMPList inside the custom folder. I have experimented with the standard mx:list and an array collection for data binding into the list. But how can I write the user selection into an XMP field? Example: In the List the user choose three languages (DE, EN, FR). Is it possible to collect the choice into a string and to write the result into an XMP standard field (e.g. dc:description)?
A further question is, if it's possible to use the "HTTPService" to bind an external xml-file with the languages and other informations into the panel or is it only possible to work with an array collection inside the code?
Here is my code:
<?xml version="1.0" encoding="utf-8"?>
<fi:XMPForm
          xmlns:mx="http://www.adobe.com/2006/mxml"
          xmlns:fi="com.adobe.xmp.components.*" width="100%" height="100%"
          xmlns:Iptc4xmpCore ="http://iptc.org/std/Iptc4xmpCore/1.0/xmlns/"
          label="XMP-Custom Panel"
          initialize="ds.send()"
          >
     
     <fi:XMPNamespaces>
          <fi:XMPNamespace prefix="dc" value="http://purl.org/dc/elements/1.1/"/>
     </fi:XMPNamespaces>
     <fi:XMPForm>
          <mx:HBox width="100%" height="26" verticalAlign="middle">
               <mx:HRule width="50%"/>
               <mx:Label text="Allgemeine Metadaten" fontSize="12" fontWeight="bold"/>
               <fi:XMPSeparator width="50%"/>
          </mx:HBox>
          <fi:XMPFormItem
                    label="Titel"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Dateiname" fontSize="11" width="100%">
               <fi:XMPTextInput xmpPath="dc:title" xmpType="Localized" width="100%"/>
          </fi:XMPFormItem>
          <fi:XMPFormItem
                    label="Titel"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Dateiname" fontSize="11" width="100%">
               <fi:XMPTextInput xmpPath="dc:title" xmpType="Localized" width="100%"/>
          </fi:XMPFormItem>
          <fi:XMPFormItem
                    label="Druckkennzeichen"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Dateiname" fontSize="11" width="100%">
               <fi:XMPTextInput xmpPath="dc:title" xmpType="Localized" width="100%"/>
          </fi:XMPFormItem>
          <fi:XMPFormItem
                    label="Verfasser"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Erzeuger des Dokumentes" fontSize="11" width="100%">
               <fi:XMPComboBox xmpPath="dc:creator" width="100%"/>
          </fi:XMPFormItem>
          <fi:XMPFormItem
                    label="Versionsnummer"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Dateiname" fontSize="11" width="100%">
               <fi:XMPComboBox xmpPath="dc:creator" width="100%"/>
          </fi:XMPFormItem>
          <mx:HBox width="100%" height="26" verticalAlign="middle">
               <mx:HRule width="50%"/>
               <mx:Label text="Enthaltene Sprachen" fontSize="12" fontWeight="bold"/>
               <fi:XMPSeparator width="50%"/>
          </mx:HBox>
          
             <mx:Script>
        <![CDATA[
            import flash.events.MouseEvent;
            import mx.controls.Alert;
            import mx.collections.ArrayCollection;
            private const NL:String = "\r";
            // A data provider created by using ActionScript
            [Bindable]
            private var subscriptions:ArrayCollection =
                new ArrayCollection
                        {data:0, label:"Deutsch"},
                        {data:1, label:"Englisch"},
                        {data:2, label:"Französisch"},
                        {data:3, label:"Italienisch"}
            [Bindable]
            private var market:ArrayCollection =
                new ArrayCollection
                        {data:0, label:"(Bitte Marktversion auswählen)"},
                        {data:1, label:"Marktversion Deutsch (M_DE)"},
                        {data:2, label:"Marktversion Englisch (M_EN)"},
                        {data:3, label:"Marktversion Frankreich (M_FR)"},
                        {data:4, label:"Marktversion Italien (M_IT)"}
            [Bindable]
            private var documenttyp:ArrayCollection =
                new ArrayCollection
                        {data:0, label:"(Bitte Dokumenttyp auswählen)"},
                              {data:1, label:"Gebrauchsanweisung"},
                        {data:2, label:"Ersatzteilkatalog"},
                        {data:3, label:"Service-Anleitung"},
                        {data:4, label:"Etikett"}
        ]]>
    </mx:Script>
                <fi:XMPFormItem label="Sprachauswahl" width="100%">
                <mx:List
                    id="userSubscriptions" rowCount="4"
                    allowMultipleSelection="true" width="100%"
                    dataProvider="{subscriptions}"
                />
            </fi:XMPFormItem>
                <mx:Text text="* Mehrfachauswahl möglich." fontWeight="normal" fontSize="10"/>
            
          <fi:XMPFormItem
                    label="Marktvariante"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Dateiname" fontSize="11" width="100%">
               <fi:XMPComboBox xmpPath="dc:creator" width="100%" dataProvider="{market}"/>
          </fi:XMPFormItem>
          <fi:XMPFormItem
                    label="Dokumenttyp"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Dateiname" fontSize="11" width="100%">
               <fi:XMPComboBox xmpPath="dc:creator" width="100%" dataProvider="{documenttyp}"/>
          </fi:XMPFormItem>
          <fi:XMPFormItem
                    label="Stichworte"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Erzeuger des Dokumentes" fontSize="11" width="100%">
               <fi:XMPTextArea/>
          </fi:XMPFormItem>
          <mx:HBox width="100%" height="26" verticalAlign="middle">
               <mx:HRule width="50%"/>
               <mx:Label text="Metadaten Photoshop" fontSize="12" fontWeight="bold"/>
               <fi:XMPSeparator width="50%"/>
          </mx:HBox>
          <fi:XMPFormItem
                    label="Originalname FA"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Dateiname" fontSize="11" width="100%" id="PS1">
               <fi:XMPTextInput xmpPath="dc:title" xmpType="Localized" width="100%"/>
          </fi:XMPFormItem>
          <fi:XMPFormItem
                    label="Fotoauftragsnummer"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Dateiname" fontSize="11" width="100%" id="PS2">
               <fi:XMPTextInput xmpPath="dc:title" xmpType="Localized" width="100%"/>
          </fi:XMPFormItem>
          <fi:XMPFormItem
                    label="Interne Anmerkungen"
                    labelTooltip="$$$/xmp/sdk/custompanels/Test/TitleToolTip=Erzeuger des Dokumentes" fontSize="11" width="100%" id="PS3">
               <fi:XMPTextArea/>
          </fi:XMPFormItem>
          <mx:Text text="* hier steht eine kleine Erläuterung" fontWeight="normal" fontSize="10"/>
     </fi:XMPForm>
</fi:XMPForm>
Any suggestions?
Thank you in advance.
Markus

Hi Markus,
the FileInfo SDK does not offer a ready-made list component allowing for multi-selection.
So you would need to implement one using the FileInfo SDK API. Your component "XMPList" would inherit from mx:list and would need to implement the XMPRead and XMPWrite events and talk to the XMP using the IXMPAccess interface within those event handlers.
Please have a look at the Programmer's Guide, section "XMP Flex components" and at the API description available in "docs" for further guidanc.
Hope this helps
Kind Regards
Jörg
Adobe XMP

How can i create Level Based Hierarchy using multiple logical table.

Similar Messages

Maybe you are looking for